Hi I downloaded svn version 2945 and am getting a zero sized file from
cat /dev/video0 > test.mpg. I am using the following parameters modprobe tuner ignore=0,0x6b modprobe ivtv ivtv_std=2 sleep 1 ivtvctl -q0 ivtvctl -p4 modprobe lirc_i2c sleep 1 lircd -d /dev/lirc0 --permission=666 I am then using ptune-ui.pl to set the channel. I will try some of the earlier versions to find at what point it stops working, I just thought I should send an email to let you know I have a problem. 2836 is the last version I had run before this (worked ok). The dmesg log is below. Best Regards Trev tuner: Ignoring new-style parameters in presence of obsolete ones Linux video capture interface: v1.00 tveeprom: Ignoring new-style parameters in presence of obsolete ones ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.5.1 (development revision 2944) loading ivtv: Linux version: 2.6.8.1-12mdk 686 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Adaptec VIDEOH! AVC-2410 card (cx23416 based) PCI: Found IRQ 10 for device 0000:00:0e.0 PCI: Sharing IRQ 10 with 0000:00:05.0 PCI: Sharing IRQ 10 with 0000:00:07.0 PCI: Sharing IRQ 10 with 0000:00:09.2 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 All bytes are equal. It is not a TEA5767 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] saa7115: Ignoring new-style parameters in presence of obsolete ones saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp3400: Ignoring new-style parameters in presence of obsolete ones msp34xx: ivtv version msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Oct 9 2005 13:35:29 ivtv0: i2c attach to card #0 ok [client=MSP3415G-B8, addr=40] cs53l32a: Ignoring new-style parameters in presence of obsolete ones cs53l32a 0-0011: chip found @ 0x22 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=cs53l32a, addr=11] tda9887: Ignoring new-style parameters in presence of obsolete ones tda9885/6/7: (ivtv) chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02030015 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv0: Initialized Adaptec VIDEOH! AVC-2410, card #0 ivtv: ==================== END INIT IVTV ==================== lirc_dev: IR Remote Control driver registered, at major 61 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture rivatv: Video4Linux driver for NVIDIA cards rivatv: Version 0.8.5 rivatv: MMX processor extension enabled cx2388x v4l2 driver version 0.0.5 loaded lirc_i2c: chip found @ 0x6b (Adaptec IR) ivtv0: i2c attach to card #0 ok [client=Adaptec IR, addr=6b] lirc_dev: lirc_register_plugin: sample_rate: 10 _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
