Hi, I'm getting ivtv problems with the latest Fedora Core Devel kernels. A few days ago everything worked fine :
Dec 15 23:15:53 rousalka kernel: ivtv: ==================== START INIT IVTV ==================== Dec 15 23:15:53 rousalka kernel: ivtv: version 0.5.2 (development snapshot compiled on Thu Dec 15 23:10:04 2005) loading Dec 15 23:15:53 rousalka kernel: ivtv: Linux version: 2.6.14-1.1760_FC5 SMP gcc-4.1 Dec 15 23:15:53 rousalka kernel: ivtv: In case of problems please include the debug info between Dec 15 23:15:53 rousalka kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Dec 15 23:15:53 rousalka kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Dec 15 23:15:53 rousalka kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) Dec 15 23:15:53 rousalka kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Dec 15 23:15:53 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=eeprom, addr=50] Dec 15 23:15:53 rousalka kernel: tveeprom 2-0050: The eeprom says no radio is present, but the tuner type Dec 15 23:15:53 rousalka kernel: tveeprom 2-0050: indicates otherwise. I will assume that radio is present. Dec 15 23:15:53 rousalka kernel: tveeprom 2-0050: Hauppauge model 26039, rev C1A5, serial# 8203263 Dec 15 23:15:53 rousalka kernel: tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38) Dec 15 23:15:53 rousalka kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74) Dec 15 23:15:55 rousalka kernel: tveeprom 2-0050: audio processor is CX25842 (idx 36) Dec 15 23:15:55 rousalka kernel: tveeprom 2-0050: decoder processor is CX25842 (idx 29) Dec 15 23:15:55 rousalka kernel: tveeprom 2-0050: has radio, has IR remote Dec 15 23:15:55 rousalka kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Dec 15 23:15:55 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Dec 15 23:15:55 rousalka kernel: cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) Dec 15 23:15:55 rousalka kernel: cx25840 2-0044: loaded v4l-cx25840.fw firmware (12282 bytes) Dec 15 23:15:55 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] Dec 15 23:15:55 rousalka kernel: wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Dec 15 23:15:55 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] Dec 15 23:15:55 rousalka kernel: usb 1-9.3: reset full speed USB device using ehci_hcd and address 5 Dec 15 23:15:55 rousalka kernel: tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Dec 15 23:15:55 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Dec 15 23:15:55 rousalka kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Dec 15 23:15:56 rousalka kernel: ivtv0: Encoder revision: 0x02050032 Dec 15 23:15:56 rousalka kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Dec 15 23:15:56 rousalka kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Dec 15 23:15:56 rousalka kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Dec 15 23:15:56 rousalka kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Dec 15 23:15:56 rousalka kernel: ivtv0: Create encoder radio stream Dec 15 23:15:56 rousalka kernel: tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Dec 15 23:15:56 rousalka kernel: ivtv0: Initialized WinTV PVR 150, card #0 Dec 15 23:15:56 rousalka kernel: ivtv: ==================== END INIT IVTV ==================== (with kernel 2.6.14-1.1760_FC5 and svn dump 3029, gcc version 4.1.0 20051212 (Red Hat 4.1.0-0.7)) But later kernels fail, this entry being the latest example (kernel 2.6.14-1.1770_FC5, svn dump 3033, gcc version 4.1.0 20051214 (Red Hat 4.1.0-0.9)) Dec 17 13:13:56 rousalka kernel: ivtv: ==================== START INIT IVTV ==================== Dec 17 13:13:56 rousalka kernel: ivtv: version 0.5.2 (development snapshot compiled on Sat Dec 17 13:12:50 2005) loading Dec 17 13:13:56 rousalka kernel: ivtv: Linux version: 2.6.14-1.1770_FC5 SMP gcc-4.1 Dec 17 13:13:56 rousalka kernel: ivtv: In case of problems please include the debug info between Dec 17 13:13:56 rousalka kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Dec 17 13:13:56 rousalka kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Dec 17 13:13:56 rousalka kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) Dec 17 13:13:56 rousalka kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 Dec 17 13:13:56 rousalka kernel: GSI 22 sharing vector 0x4A and IRQ 22 Dec 17 13:13:56 rousalka kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 74 Dec 17 13:13:56 rousalka kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Dec 17 13:13:56 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=eeprom, addr=50] Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: The eeprom says no radio is present, but the tuner type Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: indicates otherwise. I will assume that radio is present. Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: Hauppauge model 26039, rev C1A5, serial# 8203263 Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38) Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74) Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: audio processor is CX25842 (idx 36) Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: decoder processor is CX25842 (idx 29) Dec 17 13:13:56 rousalka kernel: tveeprom 2-0050: has radio, has IR remote Dec 17 13:13:57 rousalka kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Dec 17 13:13:57 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Dec 17 13:13:57 rousalka kernel: cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) Dec 17 13:13:58 rousalka kernel: cx25840 2-0044: loaded v4l-cx25840.fw firmware (12282 bytes) Dec 17 13:13:58 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] Dec 17 13:13:58 rousalka kernel: wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Dec 17 13:13:58 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] Dec 17 13:13:58 rousalka kernel: tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Dec 17 13:13:58 rousalka kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Dec 17 13:13:59 rousalka kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Dec 17 13:13:59 rousalka kernel: ivtv0 warning: Encoder mailbox not found Dec 17 13:13:59 rousalka kernel: ivtv0 warning: Decoder mailbox not found Dec 17 13:13:59 rousalka kernel: ivtv0: Error locating firmware. Dec 17 13:13:59 rousalka kernel: ivtv0: Error -12 on initialization Dec 17 13:13:59 rousalka kernel: ivtv: probe of 0000:01:07.0 failed with error -12 Dec 17 13:13:59 rousalka kernel: ivtv: ==================== END INIT IVTV ==================== What do these mailbox not found messages mean ? -- Nicolas Mailhot _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
