The msp3400 driver supports all mspx4xx models, including the msp4418g.
Also, as far as I can see the SCART1 output volume (register 0x07) is
set by the msp3400.c driver.
Hans
On Friday 13 January 2006 01:54, Stefan Gödel wrote:
> Hello,
>
> I have a PVR-350 card. ivtv-detect reports the following:
>
> driver: ivtv-0.4.1 (tagged release)
> card: WinTV PVR 350, bus info 0000:00:0d.0, ivtv card #0
> hardware: saa7115 saa7127 msp34xx tda9887 tveeprom
> /dev/video0: MPG encoding
> /dev/radio0: Radio
> /dev/vbi0: VBI encoding
> /dev/vbi4: VBI from MPG
> /dev/vbi8: VBI decoding
> /dev/video16: MPG decoding
> /dev/video24: PCM encoding
> /dev/video32: YUV encoding
> /dev/video48: YUV decoding
>
> I took a closer look at the chips on the card and instead of the
> reported MSP34xx sound processor there is a MSP4418G! I got the
> manual of this chip from
> http://www.alldatasheet.com/datasheet-pdf/pdf/85100/MICRONAS/MSP4418G
>.html and there are lots of differences between these chips. In
> particular there are many I²C registers that are not present in the
> MSP34xx. Page 18 of the manual lists a lot of volume control
> registers for the various outputs (the missing volume control for the
> SCART output was the main reason for me to take a look at all this
> stuff in the first place).
>
> Is there a way to set these registers by using the msp34xx driver or
> do we need a new driver for these chips?
>
> By the way: I want to give the ivtv-developers a big THANK YOU! This
> stuff is really great.
>
> Stefan
>
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
