Hi, Well, actually, the eeprom, tuner and msp3400 (and perhaps more, but I cannot think of them) modules were already part of the kernel before ivtv, but were split off early in the development cycle of ivtv to speed up development.
The difficult part is now to merge these changes back into the original V4L modules, so they can eventually become part of the kernel again. In my opinion Hans is doing a great job working towards this goal... I believe that the biggest changes with regard to this merge occured in 0.4.1, but I'm not sure; could be 0.4.0 too... Regards, Stanley. > > On 25/02/2006, at 3:08 AM, Tyler Trafford wrote: > >> Yeah, but one of those is a PVR150, which does not have an msp3400 in >> it. > > Ah. That's helpful. I just tried moving back to 0.4.0 and kernel > 2.6.14 and got a slightly different startup error: > > : drive cache: write back > sdb:<6>ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] > msp34xx: ivtv version > msp34xx: init: chip=MSP3415D-B3, has NICAM support, simple (D) mode > msp34xx: $Id$ compiled on: Feb 25 2006 00:32:38 > msp3410: daemon started > ivtv0: i2c attach to card #0 ok [client=MSP3415D-B3, addr=40] > sdb1 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 > ivtv0: loading /lib/modules/ivtv-fw-enc.bin > ivtv0: loading /lib/modules/ivtv-fw-dec.bin > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB > total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB > total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers > (2048KB total) > ivtv0: Create encoder radio stream > tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by > ivtv i2c driver #0 > msp34xx: I/O error #1 (read 0x10/0x200) > msp34xx: I/O error #2 (read 0x10/0x200) > msp34xx: I/O error #3 (read 0x10/0x200) > msp34xx: I/O error #1 (read 0x10/0x200) > msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-| > > > Because the dmesg buffer is being filled by those lines line > repeating many times, that is actually the very top of the buffer so > I can't see what came before. Strange that the CVS "$Id" tag is in > there. > > I might have to try and go back to 0.3.x where everything worked > fine. At what kernel/ivtv versions did msp3400 move into the kernel? > > Cheers > Ari Maniatis > > > > > --------------------------> > ish > http://www.ish.com.au > Level 1, 30 Wilson Street Newtown 2042 Australia > phone +61 2 9550 5001 fax +61 2 9550 4001 > PGP fingerprint 08 57 20 4B 80 69 59 E2 A9 BF 2D 48 C2 20 0C C8 > > > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
