Hello
I have just upgraded to kernel 2.6.16, and installed 0.6.1 (upgraded
yesterday to 0.6.2), but after upgrading (to 0.6.x) I have some
problems tuning the tuner. First I had a problem with the tuner going
in radio mode, but I fixed it using "ivtvctl -u 1 -p 0" (PAL-DK /
Tuner 1). But when I'm tuning, the frequence is messed up, and I get
no "Signal Detected". This error occours with both "ivtv-tune" and
"ivtvctl -r".
Please check the tuner mode and frequencies when after doing these
commands.
Both ivtv-tune and ivtvctl is the correct versions.
//Kristian Trenskow
Various outputs:
$ ivtv-tune -f 189 (frequency is right)
/dev/video0: 189.000 MHz
$ ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 6664802
tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
tuner 1-0061: Tuner mode: radio
tuner 1-0061: Frequency: 0.18 MHz
tuner 1-0061: Standard: 0x0000000f
tuner 1-0061: Signal strength: 24576
tuner 1-0061: Stereo: no
saa7115 1-0021: Audio frequency: 48000 Hz
saa7115 1-0021: Input: Composite 4
saa7115 1-0021: Video signal: bad
saa7115 1-0021: Frequency: 50 Hz
saa7115 1-0021: Detected format: BW/No color
saa7127 1-0044: Standard: 50 Hz
saa7127 1-0044: Input: normal
saa7127 1-0044: Output: S-Video + Composite
saa7127 1-0044: WSS: disabled
saa7127 1-0044: VPS: disabled
saa7127 1-0044: CC: disabled
msp3400 1-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
msp3400 1-0040: Audio: volume 58880
msp3400 1-0040: Mode: AM (for carrier detect)
msp3400 1-0040: Standard: could not detect sound standard (mono)
msp3400 1-0040: ACB: 0x0c00
ivtv0: ================== END STATUS CARD #0 ==================
$ ivtvctl -u 1 -p 0
ioctl VIDIOC_S_STD ok
Standard set to 000000e0
ioctl VIDIOC_S_INPUT ok
Video input set to 0
$ ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 6664802
tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
tuner 1-0061: Tuner mode: analog TV
tuner 1-0061: Frequency: 11.81 MHz
tuner 1-0061: Standard: 0x000000e0
saa7115 1-0021: Audio frequency: 48000 Hz
saa7115 1-0021: Input: Composite 4
saa7115 1-0021: Video signal: bad
saa7115 1-0021: Frequency: 50 Hz
saa7115 1-0021: Detected format: BW/No color
saa7127 1-0044: Standard: 50 Hz
saa7127 1-0044: Input: normal
saa7127 1-0044: Output: S-Video + Composite
saa7127 1-0044: WSS: disabled
saa7127 1-0044: VPS: disabled
saa7127 1-0044: CC: disabled
msp3400 1-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
msp3400 1-0040: Audio: volume 58880
msp3400 1-0040: Mode: AM (for carrier detect)
msp3400 1-0040: Standard: could not detect sound standard (mono)
msp3400 1-0040: ACB: 0x0c00
ivtv0: ================== END STATUS CARD #0 ==================
$ ivtvctl -r 189
ioctl VIDIOC_S_FREQUENCY ok
Frequency set to 189
$ ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 6664802
tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
tuner 1-0061: Tuner mode: analog TV
tuner 1-0061: Frequency: 11.81 MHz
tuner 1-0061: Standard: 0x000000e0
saa7115 1-0021: Audio frequency: 48000 Hz
saa7115 1-0021: Input: Composite 4
saa7115 1-0021: Video signal: bad
saa7115 1-0021: Frequency: 50 Hz
saa7115 1-0021: Detected format: BW/No color
saa7127 1-0044: Standard: 50 Hz
saa7127 1-0044: Input: normal
saa7127 1-0044: Output: S-Video + Composite
saa7127 1-0044: WSS: disabled
saa7127 1-0044: VPS: disabled
saa7127 1-0044: CC: disabled
msp3400 1-0040: MSP4418G-A2 rev1 = 0x0117 rev2 = 0x1242
msp3400 1-0040: Audio: volume 58880
msp3400 1-0040: Mode: AM (for carrier detect)
msp3400 1-0040: Standard: could not detect sound standard (mono)
msp3400 1-0040: ACB: 0x0c00
ivtv0: ================== END STATUS CARD #0 ==================
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
