Hello Petter I have seen the same like you. I saw it yesterday for the first time in one of my recordings. the bar showed up at 2/3 of the screen (yours approx. 1/3). I can not tell if it was 0.6.2 or 0.4.2, because I reverted back to 0.4.2 lately, due to a problem with my second PVR 500 tuner showing a black picture (post from 17.05.2006). We have the same PVR500 unit model 23559, although I can not tell which card recorded the showing.
Regards, Lorenz ----- Original Message ----- From: "Petter Gundersen" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, 19. May 2006 10:37 Subject: [ivtv-devel] pvr500 - horizontal line after upgrading to kernel2.6.16/ivtv 0.6 > I'm having a problem with my pvr500 after upgrading to kernel 2.6.16 > and ivtv 0.6.x. On some channels I get a horizontal bar over the > entire picture, see screenshot: > http://img92.imageshack.us/img92/7454/nrk3co.jpg > > I found a somewhat similar report on ivtv-devel from March, but no > solution http://www.gossamer-threads.com/lists/ivtv/devel/28518 . > > When I'm using kernel 2.6.15 the picture is perfect. I have used all > 0.4.x releases, 0.5.1 and the latest 0.4 branch from svn. > > As soon as I start using 2.6.16 and ivtv 0.6.x the line appears. I > have tested all 0.6 releases. I have also tried the latest development > drivers from the v4l-dvb repository with ivtv 0.6.2, but it makes no > difference. > > I also have a pvr350, no problems with the captures from that card. > > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.6.2 (tagged release) loading > ivtv: Linux version: 2.6.16-ck9 preempt 686 gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 > PCI: setting IRQ 5 as level-triggered > ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 5 (level, > low) -> IRQ 5 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom 0-0050: Hauppauge model 48134, rev J347, serial# 2756404 > tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28) > tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) > tveeprom 0-0050: audio processor is MSP4418 (idx 25) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has radio, has IR remote > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is > autodetect and autoselect > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) > ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) > ivtv0: Create decoder VOUT stream > ivtv0: Allocate DMA decoder YUV stream: 80 x 51840 buffers (4096KB total) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > tuner 1-0060: TEA5767 detected. > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #1) > tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) > tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1) > spurious 8259A interrupt: IRQ7. > tveeprom 1-0050: Hauppauge model 23559, rev D591, serial# 7874299 > tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > (eeprom 0x74) > tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 1-0050: audio processor is CX25843 (idx 37) > tveeprom 1-0050: decoder processor is CX25843 (idx 30) > tveeprom 1-0050: has radio, has no IR remote > ivtv1: This is the first unit of a PVR500 > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv1: Encoder revision: 0x02050032 > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv1: Create encoder radio stream > tuner 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 > ivtv: ====================== NEXT CARD ====================== > ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > ivtv2: Unreasonably low latency timer, setting to 64 (was 32) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2) > tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #2) > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) > cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2) > tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 7874299 > tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > (eeprom 0x74) > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 2-0050: audio processor is CX25843 (idx 37) > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > tveeprom 2-0050: has radio, has no IR remote > ivtv2: This is the second unit of a PVR500 > ivtv2: Correcting tveeprom data: no radio present on second unit > ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv2: Encoder revision: 0x02050032 > ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv2: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv2: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 > ivtv: ==================== END INIT IVTV ==================== > > > Regards, > Petter > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
