Hi, you're right, i did not notice that. Damn. I just downloaded and installed the missing file.
One more thing, i still had the same problem, in had to also install tda9887, tveeprom, msp3400, ... On some Wiki page it said i had to remove them. Now everything works. Best regards, Torsten. But i wonder where to get these files, > Torsten Mohr wrote: > > Just two days ago i ran an older distribution with older > > ivtv-driver and also captured from "S25". That worked > > fine. > > > > ivtv0: unable to open firmware v4l-cx2341x-init.mpg > > ivtv0: did you put the firmware in the hotplug firmware directory? > > ivtv0: failed to read mpeg decoder initialisation file > > v4l-cx2341x-init.mpg ivtv0: i2c hardware 0x00000008 not found for command > > 0xc008561c! ivtv0: i2c addr 0x40 not found for command 0x40086d11! > > ivtv0: i2c addr 0x40 not found for command 0xc008561c! > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > See the first 3 lines of the quoted initialization. That is probably the > answer. > > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
