Well I updated GCC to 4.1.1 and it's the same:

 1002  yum update gcc
 1003  gcc -v
 1006  rmmod ivtv cx25840 tuner tveeprom msp3400 wm8775 tda9887 saa7115 
saa7127
 1010  cd /development/svn/ivtv/
 1012  make clean
 1013  make
 1020  make install
 1021  depmod

dmesg | grep tv

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.8.0 (development revision 3310) loading
ivtv:  Linux version: 2.6.16.18 686 REGPARM 4KSTACKS gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
tveeprom 1-0050: Huh, no eeprom present (err=-121)?
tveeprom 1-0050: Encountered bad packet header [00]. Corrupt or not a 
Hauppauge eeprom.
ivtv0: No tuner detected, default to NTSC
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c addr 0x44 not found for command 0x40045613!
ivtv0: i2c addr 0x44 not found for command 0x4008646f!
ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d!
ivtv0: i2c addr 0x44 not found for command 0x40045612!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c addr 0x44 not found for command 0x40045613!
ivtv0: i2c addr 0x44 not found for command 0x40045612!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================
[EMAIL PROTECTED] ivtv]#


So that was a waste of time!

Any suggestions?



_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to