I forgot to include the IVTV Init in my previos email: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.2 (tagged release) loading ivtv: Linux version: 2.6.16-gentoo-r9 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 26052, rev C199, serial# 8165771 tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has no radio, has IR remote tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #1) cx25840 3-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 3-0050: Hauppauge model 26032, rev C199, serial# 7841418 tveeprom 3-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is CX25841 (idx 35) tveeprom 3-0050: decoder processor is CX25841 (idx 28) tveeprom 3-0050: has no radio, has IR remote ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 3-0061: type set to 50 (TCL 2002N) ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
