I might be able to find some time this week. I'll see what I can do. John
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Hans Verkuil > Sent: 16 June 2006 23:25 > To: Discussion list for development of the IVTV driver > Subject: Re: [ivtv-devel] Please test: 0.4.6/0.6.3 prerelease > > Hmm, that's decoder stuff. Unfortunately, that's not my area > of expertise. Perhaps John Harvey can help here? > > Anyway, I think it is unrelated to the frequency change fix. > > Hans > > On Friday 16 June 2006 23:53, Stanley Merkx wrote: > > Well, perhaps the hang-while-watching-recording is not completely > > Myth's fault: It just occured while I was looking for > something else > > with dmesg. > > > > I get a large amount of the following messages: > > > > ivtv0 warning: DEC: Sched Buffer end reached 0x0488efe4 > ivtv0 warning: > > DEC: Mailbox 10: 0x00000000 0x0487efe4 0x0487efe4 > > 0x0487efe4 ivtv0 warning: DEC: Sched Buffer end reached 0x0488efe4 > > ivtv0 warning: DEC: Mailbox 10: 0x00000000 0x0487efe4 0x0487efe4 > > 0x0487efe4 ivtv0 warning: DEC: Sched Buffer end reached 0x0488efe4 > > ivtv0 warning: DEC: Mailbox 10: 0x00000000 0x0487efe4 0x0487efe4 > > 0x0487efe4 ivtv0 warning: DEC: Sched Buffer end reached 0x0488efe4 > > ivtv0 warning: DEC: Mailbox 10: 0x00000000 0x0487efe4 0x0487efe4 > > 0x0487efe4 > > > > Regards, > > Stanley. > > > > > Hi Hans, > > > > > > I have been running 0.4.6 from almost the moment you asked us to > > > test it. > > > > > > I'm having no problems at all with a P4, Hyperthreading > enabled, on > > > Debian with a self compiled 2.6.15 kernel, 2 PVR350's and MythTV > > > 0.19-fixes. I do occasionally experience a lockup while > watching a > > > recording, but this looks like it happens when a Myth > recording ends > > > or a new one starts while watching another. > > > This is most likely a Myth problem, as currently I can > fix this by > > > pressing Esc and then Enter to carry on playing, Myth 0.18 did a > > > real hard lockup (power cycle required). Do not have > sufficient logs > > > to report to the MythTV list(s)... > > > > > > One clear difference I do notice compared to 0.4.5 when changing > > > channels in Myth LiveTV: > > > > > > (sequence of events:) > > > 0.4.5: > > > press key to change channel > > > display freezes for ~2 seconds > > > display runs for ~.5 second > > > display freezes > > > channel changes > > > > > > 0.4.6: > > > press key to change channel > > > display freezes for ~2 seconds > > > display runs for ~.5 seconds > > > display freezes > > > display runs for ~.5 seconds > > > channel changes > > > > > > So with 0.4.6 it seems to take slightly longer to change > the channel > > > and the channel actually changes while video is running. In > > > 0.4.5 the channel change only occurs when the video is frozen. > > > > > > I suspect this is (partly?) caused by Myth, as the behaviour > > > experienced in 0.4.5 was introduced by a MythTV update, not by an > > > ivtv update. But perhaps some (subtle) change in ivtv > > > activated/worsened this behaviour in Myth? > > > > > > I do recall a thread not so long ago about not needing to > stop the > > > decoder when changing channels... Could this be related?? > > > > > > Thanks for the good work! (how's the budget for the new monitor > > > coming along? still need donations? ;-) > > > > > > Regards, > > > Stanley. > > > > > >> Hi all, > > >> > > >> I'd like people to have a go with the 0.4.6 and 0.6.3 > development > > >> snapshots available here: > > >> > > >> 0.4.6: > > >> http://ivtvdriver.org/viewcvs/ivtv/branches/0.4.tar.gz?view=tar > > >> > > >> 0.6.3: > > >> http://ivtvdriver.org/viewcvs/ivtv/branches/0.6.tar.gz?view=tar > > >> > > >> The channel changing problem should be fixed now (and > should be a > > >> bit smoother too as the encoder is no longer paused/resumed). > > >> Please let me know if there are still problems with it. > Also test > > >> if you didn't have problems before: it's done differently now > > >> (similar to what Hauppauge does) so if I'm unlucky it > might break > > >> something that used to work :-( > > >> > > >> There are two pending issues that I'd like to solve > before I make > > >> another release: 0.4.6 contains support for cx25840 > sliced VBI for > > >> NTSC: I get conflicting reports on whether it works or not. > > >> > > >> The second issue is a problem with the i2c bus and > tveeprom. This > > >> is the blocking bug that I'd really like to fix before doing a > > >> release. > > >> > > >> Thanks, > > >> > > >> Hans > > >> > > >> _______________________________________________ > > >> ivtv-devel mailing list > > >> [email protected] > > >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > > > > > _______________________________________________ > > > ivtv-devel mailing list > > > [email protected] > > > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
