On Saturday 29 July 2006 07:53, Hans Verkuil wrote:
> On Saturday 29 July 2006 05:57, Cecil Watson wrote:
> > Hello Everyone,
> >
> > I'm working on my next release of KnoppMyth and I'd like to include
> > ivtv 0.7.0, v4l-dvb from mercurial (so I can support more hardware)
> > and 2.6.17 (.6 at this time) patched w/ ck1, suspend2 and
> > bootsplash. However, I'm encountering issue w/ ivtv:
>
> Hi Cecil,
>
> I advise against using v4l-dvb right now due to many internal
> changes. I'm not even certain if ivtv-0.7 would work against v4l-dvb:
> the trunk ivtv is really meant for that, but the trunk still needs
> more work.
>
> I know for a fact that v4l-dvb had similar problems that you
> reported, I'm not 100% sure about the current status, though, but I
> think it was fixed last week. It is also possible that you compiled
> ivtv against the wrong kernel headers.
>
> Hans
Another reason why you shouldn't use v4l-dvb are changes to struct
video_device which breaks some userspace tools (which had no business
using that struct). I'd wait with this until 2.6.18 is released and
applications are updated where necessary.
Hans
>
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.7.0 (tagged release) loading
> > ivtv: Linux version: 2.6.17-chw-7 SMP preempt mod_unload 586
> > gcc-3.4 ivtv: In case of problems please include the debug info
> > between ivtv: the START INIT IVTV and END INIT IVTV lines, along
> > with ivtv: any module options, when mailing the ivtv-users
> > mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card
> > (cx23415 based) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18
> > (level, low) -> IRQ 20 tveeprom 1-0050: Hauppauge model 48132, rev
> > J323, serial# 6565486 tveeprom 1-0050: tuner model is Philips
> > FM1236 (idx 23, type 2) tveeprom 1-0050: TV standards NTSC(M)
> > (eeprom 0x08)
> > tveeprom 1-0050: audio processor is MSP4448 (idx 27)
> > tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> > tveeprom 1-0050: has radio, has IR remote
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> > saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
> > msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
> > msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and
> > autoselect
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Decoder revision: 0x02020023
> > BUG: unable to handle kernel paging request at virtual address
> > 76747709 printing eip:
> > c02c9e85
> > *pde = 00000000
> > Oops: 0000 [#1]
> > PREEMPT SMP
> > Modules linked in: msp3400 saa7127 saa7115 tda9887 tuner ivtv
> > shpchp pci_hotplug 8250_pnp tsdev ipv6 ttusb_dec ttusbdecfe
> > dvb_ttusb_budget cx22700 budget_av tda10021 budget_ci budget
> > s5h1420 budget_core dvb_ttpci lnbp21 l64781 tda8083 sp8870 stv0297
> > ttpci_eeprom saa7146_vv saa7146 mt312 tda1004x ves1820 stv0299
> > ves1x93 via drm dvb_bt8xx nxt6000 sp887x dst_ca or51211 dst bt878
> > cx24110 bttv compat_ioctl32 evdev usbhid autofs4 af_packet
> > snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm snd_timer
> > snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
> > soundcore via_agp agpgart ir_common btcx_risc tveeprom videodev
> > v4l1_compat v4l2_common cx88_vp3054_i2c i2c_algo_bit mt352 dvb_pll
> > or51132 video_buf_dvb dvb_core video_buf nxt200x isl6421 zl10353
> > cx24123 lgdt330x cx22702 i2c_viapro i2c_core parport_pc parport
> > 8250 serial_core pcmcia firmware_class yenta_socket rsrc_nonstatic
> > pcmcia_core video thermal processor fan container button battery ac
> > genrtc ohci1394 ieee1394 ehci_hcd ohci_hcd uhci_hcd usbcore
> > megaraid CPU: 0
> > EIP: 0060:[<c02c9e85>] Not tainted VLI
> > EFLAGS: 00010202 (2.6.17-chw-7 #1)
> > EIP is at kref_get+0x5/0x30
> > eax: 76747709 ebx: 76747709 ecx: 000000d0 edx: 00000007
> > esi: c0539ffe edi: f3ced947 ebp: fffffff4 esp: f3ee9d58
> > ds: 007b es: 007b ss: 0068
> > Process modprobe (pid: 3823, threadinfo=f3ee8000 task=f7d0e030)
> > Stack: 767476f1 c02c96b2 76747709 f3ced900 c01b0a46 767476f1
> > f3f79560 f3e64114
> > c0539ff7 ffffffef f3ced8e0 c01b0aff f3e64114 c0539ff7
> > 767476f1 f4c495e0
> > f4c495e0 f4c495e8 c032e022 f4c495e8 767476f1 c0539ff7
> > f4c495e0 00000000
> > Call Trace:
> > <c02c96b2> kobject_get+0x12/0x20 <c01b0a46>
> > sysfs_add_link+0x66/0xc0 <c01b0aff> sysfs_create_link+0x5f/0x80
> > <c032e022>
> > class_device_add+0x232/0x250
> > <c032e051> class_device_register+0x11/0x20 <f8ef53c7>
> > video_register_device+0x107/0x1d0 [videodev]
> > <f91525a6> ivtv_reg_dev+0xb6/0x190 [ivtv] <f91526e7>
> > ivtv_dev_setup+0x67/0xd0 [ivtv]
> > <f915292f> ivtv_streams_setup+0xaf/0x170 [ivtv] <f914d8e7>
> > ivtv_probe+0x3a7/0xac0 [ivtv]
> > <c04cd732> preempt_schedule+0x42/0x60 <c01325de>
> > call_usermodehelper_keys+0xde/0xf0
> > <c01324a0> __call_usermodehelper+0x0/0x60 <c02d6301>
> > pci_call_probe+0x11/0x20
> > <c02d634b> __pci_device_probe+0x3b/0x50 <c02d637f>
> > pci_device_probe+0x1f/0x40
> > <c032ce23> driver_probe_device+0x53/0xb0 <c032cf00>
> > __driver_attach+0x0/0x70
> > <c032cf6b> __driver_attach+0x6b/0x70 <c032c43d>
> > bus_for_each_dev+0x4d/0x70 <c02c94a8> kobject_add+0x48/0xe0
> > <c032cf85> driver_attach+0x15/0x20 <c032cf00>
> > __driver_attach+0x0/0x70 <c032c8cb> bus_add_driver+0x5b/0x90
> > <c032d3f5> driver_register+0x65/0xa0 <c02d65af>
> > __pci_register_driver+0x4f/0x60
> > <f914e535> module_start+0x85/0xf0 [ivtv] <c013def4>
> > sys_init_module+0x114/0x1e0
> > <c0103177> syscall_call+0x7/0xb
> > Code: 46 89 37 89 d8 5b 5e 5f 5d c3 89 c2 eb c6 90 90 90 90 90 90
> > 90 90 8b 44 24 04 c7 00 01 00 00 00 c3 90 8d 74 26 00 53 8b 5c 24
> > 08 <8b> 03 85 c0 74 05 90 ff 03 5b c3 68 24 ae 4d c0 6a 20 68 ed 8b
> > EIP: [<c02c9e85>] kref_get+0x5/0x30 SS:ESP 0068:f3ee9d58
> > <6>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> > agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
> > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> > [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized
> > memory manager.
> >
> >
> > Assistance in resolving this would be much appreciated.
> >
> > Regards,
> >
> > Cecil
> >
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
