On Saturday 29 July 2006 05:57, Cecil Watson wrote:
> Hello Everyone,
>
> I'm working on my next release of KnoppMyth and I'd like to include
> ivtv 0.7.0, v4l-dvb from mercurial (so I can support more hardware)
> and 2.6.17 (.6 at this time) patched w/ ck1, suspend2 and bootsplash.
> However, I'm encountering issue w/ ivtv:
Hi Cecil,
I advise against using v4l-dvb right now due to many internal changes.
I'm not even certain if ivtv-0.7 would work against v4l-dvb: the trunk
ivtv is really meant for that, but the trunk still needs more work.
I know for a fact that v4l-dvb had similar problems that you reported,
I'm not 100% sure about the current status, though, but I think it was
fixed last week. It is also possible that you compiled ivtv against the
wrong kernel headers.
Hans
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.7.0 (tagged release) loading
> ivtv: Linux version: 2.6.17-chw-7 SMP preempt mod_unload 586 gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
> ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 20
> tveeprom 1-0050: Hauppauge model 48132, rev J323, serial# 6565486
> tveeprom 1-0050: tuner model is Philips FM1236 (idx 23, type 2)
> tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 1-0050: audio processor is MSP4448 (idx 27)
> tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 1-0050: has radio, has IR remote
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and
> autoselect
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Decoder revision: 0x02020023
> BUG: unable to handle kernel paging request at virtual address
> 76747709 printing eip:
> c02c9e85
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT SMP
> Modules linked in: msp3400 saa7127 saa7115 tda9887 tuner ivtv shpchp
> pci_hotplug 8250_pnp tsdev ipv6 ttusb_dec ttusbdecfe dvb_ttusb_budget
> cx22700 budget_av tda10021 budget_ci budget s5h1420 budget_core
> dvb_ttpci lnbp21 l64781 tda8083 sp8870 stv0297 ttpci_eeprom
> saa7146_vv saa7146 mt312 tda1004x ves1820 stv0299 ves1x93 via drm
> dvb_bt8xx nxt6000 sp887x dst_ca or51211 dst bt878 cx24110 bttv
> compat_ioctl32 evdev usbhid autofs4 af_packet snd_via82xx gameport
> snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc
> snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore via_agp
> agpgart ir_common btcx_risc tveeprom videodev v4l1_compat v4l2_common
> cx88_vp3054_i2c i2c_algo_bit mt352 dvb_pll or51132 video_buf_dvb
> dvb_core video_buf nxt200x isl6421 zl10353 cx24123 lgdt330x cx22702
> i2c_viapro i2c_core parport_pc parport 8250 serial_core pcmcia
> firmware_class yenta_socket rsrc_nonstatic pcmcia_core video thermal
> processor fan container button battery ac genrtc ohci1394 ieee1394
> ehci_hcd ohci_hcd uhci_hcd usbcore megaraid CPU: 0
> EIP: 0060:[<c02c9e85>] Not tainted VLI
> EFLAGS: 00010202 (2.6.17-chw-7 #1)
> EIP is at kref_get+0x5/0x30
> eax: 76747709 ebx: 76747709 ecx: 000000d0 edx: 00000007
> esi: c0539ffe edi: f3ced947 ebp: fffffff4 esp: f3ee9d58
> ds: 007b es: 007b ss: 0068
> Process modprobe (pid: 3823, threadinfo=f3ee8000 task=f7d0e030)
> Stack: 767476f1 c02c96b2 76747709 f3ced900 c01b0a46 767476f1 f3f79560
> f3e64114
> c0539ff7 ffffffef f3ced8e0 c01b0aff f3e64114 c0539ff7 767476f1
> f4c495e0
> f4c495e0 f4c495e8 c032e022 f4c495e8 767476f1 c0539ff7 f4c495e0
> 00000000
> Call Trace:
> <c02c96b2> kobject_get+0x12/0x20 <c01b0a46>
> sysfs_add_link+0x66/0xc0 <c01b0aff> sysfs_create_link+0x5f/0x80
> <c032e022>
> class_device_add+0x232/0x250
> <c032e051> class_device_register+0x11/0x20 <f8ef53c7>
> video_register_device+0x107/0x1d0 [videodev]
> <f91525a6> ivtv_reg_dev+0xb6/0x190 [ivtv] <f91526e7>
> ivtv_dev_setup+0x67/0xd0 [ivtv]
> <f915292f> ivtv_streams_setup+0xaf/0x170 [ivtv] <f914d8e7>
> ivtv_probe+0x3a7/0xac0 [ivtv]
> <c04cd732> preempt_schedule+0x42/0x60 <c01325de>
> call_usermodehelper_keys+0xde/0xf0
> <c01324a0> __call_usermodehelper+0x0/0x60 <c02d6301>
> pci_call_probe+0x11/0x20
> <c02d634b> __pci_device_probe+0x3b/0x50 <c02d637f>
> pci_device_probe+0x1f/0x40
> <c032ce23> driver_probe_device+0x53/0xb0 <c032cf00>
> __driver_attach+0x0/0x70
> <c032cf6b> __driver_attach+0x6b/0x70 <c032c43d>
> bus_for_each_dev+0x4d/0x70 <c02c94a8> kobject_add+0x48/0xe0
> <c032cf85> driver_attach+0x15/0x20 <c032cf00>
> __driver_attach+0x0/0x70 <c032c8cb> bus_add_driver+0x5b/0x90
> <c032d3f5> driver_register+0x65/0xa0 <c02d65af>
> __pci_register_driver+0x4f/0x60
> <f914e535> module_start+0x85/0xf0 [ivtv] <c013def4>
> sys_init_module+0x114/0x1e0
> <c0103177> syscall_call+0x7/0xb
> Code: 46 89 37 89 d8 5b 5e 5f 5d c3 89 c2 eb c6 90 90 90 90 90 90 90
> 90 8b 44 24 04 c7 00 01 00 00 00 c3 90 8d 74 26 00 53 8b 5c 24 08
> <8b> 03 85 c0 74 05 90 ff 03 5b c3 68 24 ae 4d c0 6a 20 68 ed 8b
> EIP: [<c02c9e85>] kref_get+0x5/0x30 SS:ESP 0068:f3ee9d58
> <6>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
> agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized
> memory manager.
>
>
> Assistance in resolving this would be much appreciated.
>
> Regards,
>
> Cecil
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
