I suddenly had that too... going through the various versions with 'svn update -r', I found that commit r3539 consistenty broke it. It's weird because the saa717x driver isn't even listed in lsmod (perhaps it gets loaded, does something to screw things up, and then unloads? or perhaps the r3537 version does some 'required' initialization and then unloads?)
I can build the latest 0.8 that doesn't have the error, as long as I take i2c-drivers/saa717x.c from r3537. Good luck... Jelle. Martin Dauskardt wrote: > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.8.1 (v4l-dvb + ivtv virtual merge) Revision: 3561 loading > ivtv: Linux version: 2.6.18 preempt mod_unload 386 gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> > IRQ 10 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 7521224 > tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 1-0050: audio processor is MSP4418 (idx 25) > tveeprom 1-0050: decoder processor is SAA7115 (idx 19) > tveeprom 1-0050: has radio, has IR remote > ivtv0: Autodetected Hauppauge WinTV PVR-350 > saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) > msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and > autoselect > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Registered device video1 for encoder MPEG > ivtv0: Registered device video32 for encoder YUV > ivtv0: Registered device vbi1 for encoder VBI > ivtv0: Registered device video24 for encoder PCM audio > ivtv0: Registered device radio0 for encoder radio > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > ivtv-osd: Specified card (id 0) is either not present or does not support TV > out > ivtv-osd: Specified card (id 0) is either not present or does not support TV > out > ivtv-osd: Specified card (id 0) is either not present or does not support TV > out > ivtv-osd: Specified card (id 0) is either not present or does not support TV > out > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
