I removed the PAUSE_ENCODING line that gave many people problems. I also
fixed the Hauppauge PVR-350 issue introduced in the last change.
See if it now works better.
Hans
On Saturday 11 November 2006 21:13, Jelle wrote:
> Hold on... looks like the build dependencies are incomplete... I'm
> doing a 'make clean' before each 'make' now, and it's clearly commit
> 3542 that is the culprit. At least that can make sense ;-)
>
> Now I have the head of 0.8 with commit 3542 undone (see attached
> patch), and it loads ivtv_fb.ko again.
>
> Probably that eeprom card detection code forgets to detect if it as
> tvout or something of that sorts.
>
> Maybe somebody can confirm/try?
>
> Jelle.
>
> timecop wrote:
> > looks like the japanese patch backfired.
> >
> > -t
> >
> > On 11/12/06, Jelle <[EMAIL PROTECTED]> wrote:
> >> I suddenly had that too... going through the various versions with
> >> 'svn update -r', I found that commit r3539 consistenty broke it.
> >> It's weird because the saa717x driver isn't even listed in lsmod
> >> (perhaps it gets loaded, does something to screw things up, and
> >> then unloads? or perhaps the r3537 version does some 'required'
> >> initialization and then unloads?)
> >>
> >> I can build the latest 0.8 that doesn't have the error, as long as
> >> I take i2c-drivers/saa717x.c from r3537.
> >>
> >> Good luck...
> >>
> >> Jelle.
> >>
> >> Martin Dauskardt wrote:
> >>> ivtv: ==================== START INIT IVTV ====================
> >>> ivtv: version 0.8.1 (v4l-dvb + ivtv virtual merge) Revision:
> >>> 3561 loading ivtv: Linux version: 2.6.18 preempt mod_unload 386
> >>> gcc-4.0 ivtv: In case of problems please include the debug info
> >>> between ivtv: the START INIT IVTV and END INIT IVTV lines, along
> >>> with ivtv: any module options, when mailing the ivtv-users
> >>> mailinglist. ivtv0: Autodetected Hauppauge card
> >>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> >>> PCI: setting IRQ 10 as level-triggered
> >>> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10
> >>> (level, low) -> IRQ 10 ivtv0: Unreasonably low latency timer,
> >>> setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware
> >>> (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
> >>> bytes) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> >>> tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> >>> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> >>> tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 7521224
> >>> tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57,
> >>> type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I)
> >>> SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio
> >>> processor is MSP4418 (idx 25)
> >>> tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> >>> tveeprom 1-0050: has radio, has IR remote
> >>> ivtv0: Autodetected Hauppauge WinTV PVR-350
> >>> saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c
> >>> driver #0) saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver
> >>> #0) msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
> >>> msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is
> >>> autodetect and autoselect ivtv0: Encoder revision: 0x02050032
> >>> ivtv0: Decoder revision: 0x02020023
> >>> ivtv0: Registered device video1 for encoder MPEG
> >>> ivtv0: Registered device video32 for encoder YUV
> >>> ivtv0: Registered device vbi1 for encoder VBI
> >>> ivtv0: Registered device video24 for encoder PCM audio
> >>> ivtv0: Registered device radio0 for encoder radio
> >>> ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
> >>> tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME
> >>> MK3)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
> >>> ivtv: ==================== END INIT IVTV ====================
> >>> ivtv-osd: Specified card (id 0) is either not present or does
> >>> not support TV out ivtv-osd: Specified card (id 0) is either not
> >>> present or does not support TV out ivtv-osd: Specified card (id
> >>> 0) is either not present or does not support TV out ivtv-osd:
> >>> Specified card (id 0) is either not present or does not support
> >>> TV out
> >>
> >> _______________________________________________
> >> ivtv-devel mailing list
> >> [email protected]
> >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
> >
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
