Keller Giacomarro wrote: > I've having trouble getting ivtv to recognize and use the tuner on my > card. This card works in Windows and is good. Here's the info. > > #Vitals > Ubuntu 6.10 > ivtv 0.7.3, compiled from source > Diamond PVR-550 (basically a Yuan PG600) > > #Modprobe.conf > alias char-major-81 videodev > alias char-major-81-0 ivtv > > #Output from dmesg > [17182050.600000] ivtv: ==================== START INIT IVTV > ==================== > [17182050.600000] ivtv: version 0.7.0 (tagged release) loading > [17182050.600000] ivtv: Linux version: 2.6.17-11-generic SMP > mod_unload 586 REGPARM gcc-4.1 > [17182050.600000] ivtv: In case of problems please include the debug > info between > [17182050.600000] ivtv: the START INIT IVTV and END INIT IVTV lines, along > with > [17182050.600000] ivtv: any module options, when mailing the > ivtv-users mailinglist. > [17182050.604000] ivtv0: Autodetected Yuan PG600, Diamond PVR-550 card > (cx23416 based) > [17182050.604000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 > (level, low) -> IRQ 193 > [17182050.840000] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > [17182054.104000] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > [17182054.848000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > [17182055.064000] ivtv0: Encoder revision: 0x02050032 > [17182055.064000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 > buffers (4096KB total) > [17182055.064000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > buffers (2048KB total) > [17182055.064000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > buffers (2048KB total) > [17182055.064000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x > 4608 buffers (2048KB total) > [17182055.216000] ivtv0: Initialized Yuan PG600, Diamond PVR-550, card #0 > [17182055.220000] ivtv: ==================== END INIT IVTV > ==================== > > It looks to me like ivtv is correctly ID'ing the card, finds the mpeg2 > encoder, but never initializes the tuner. There is no 'tuner' line in > there like I'd expect. > > I cannot get the card to have a signal or show a picture from the > tuner card. Trying to change the input to the tuner makes no > difference. I've tried upgrading to Ubuntu 7.04 for the in-kernel > support of ivtv with no luck. Modprobe.conf changes also seem to make > little difference. > > Any help you can give about how I might coerce ivtv into seeing the > tuner would be most appreciated. After sitting at this particular > roadblock for the last week, I'm just about ready to throw in the > towel and load up Windows! Hopefully it won't come to that. =) > > Thanks in advance for all your help! > > -Keller > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel >
Hi, Does your card have a traditional can tuner (big metal box)? If not, can you see a tiny chip marked "Xceive" near the antenna connector? Regards, Zoltan _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
