I have obtained a Leadtek PVR3000 in the hope of it one day perhaps working better than the WinTV150 in terms of DMA errors, but first step is making it work at all.
If you can suggest any steps for me to take, to help get this card supported, drop me an email. Regards, Mark Bryars. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.19.1 SMP mod_unload PENTIUM4 REGPARM ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 107d/6f19 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 19 (level, low) -> IRQ 20 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 input: i2c IR (Hauppauge) as /class/input/input1 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0] tveeprom 0-0050: Huh, no eeprom present (err=-121)? tveeprom 0-0050: Encountered bad packet header [07]. Corrupt or not a Hauppauge eeprom. ivtv0: Invalid EEPROM tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0060: All bytes are equal. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Disabled encoder YUV device ivtv0: Disabled encoder VBI device ivtv0: Disabled encoder PCM audio device ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! tuner 0-0060: tuner type not set ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! tuner 0-0060: tuner type not set ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv0: i2c addr 0x44 not found for command 0xc0cc5605! -- Mark Bryars Product Development Engineer ETV Interactive Ltd Logie Court Stirling University Innovation Park Stirling Scotland, UK FK9 4NF T: +44 (0) 1786 455150 F: +44 (0) 1786 455179 W: www.etvinteractive.com _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
