thanks for the information. I will check the repository. yes, I am using mythtv. I thought that the cause might be my raid5 (soft). I do not remember having these problem while I was writing recordings to one disk.
M. 2007/9/16, Hans Verkuil <[EMAIL PROTECTED]>: > On Friday 14 September 2007 19:32:40 Ma Begaj wrote: > > Hi, > > > > I have pvr150 and I am using ivtv from the kernel (2.6.22.1) at the > > moment. The problem is that I received pretty often this (but I saw > > no problems in my recordings ... I think): > > > > Sep 9 17:10:53 jingle kernel: ivtv0: All encoder MPEG stream buffers > > are full. Dropping data. > > Sep 9 17:10:53 jingle kernel: ivtv0: Cause: the application is not > > reading fast enough. > > > > > > or this (much more often): > > > > Sep 11 19:53:05 jingle kernel: ivtv0: DMA TIMEOUT 00000001 0 > > Sep 11 19:53:45 jingle last message repeated 4 times > > Sep 11 19:54:53 jingle last message repeated 7 times > > Sep 11 19:56:02 jingle last message repeated 7 times > > > > and my computer becomes unresponsive after some time (X, ssh, etc). > > only reset "helps". > > these are the last lines from syslog (before reboot), which brings me > > to the conclusion that ivtv locks down my box. > > > > I just compiled 2.6.22.6 but I saw the first message right after > > reboot: [EMAIL PROTECTED]/packages# dmesg | grep Dropping > > ivtv0: All encoder VBI stream buffers are full. Dropping data. > > ivtv0: All encoder VBI stream buffers are full. Dropping data. > > ivtv0: All encoder MPEG stream buffers are full. Dropping data. > > ivtv0: All encoder MPEG stream buffers are full. Dropping data. > > ivtv0: All encoder VBI stream buffers are full. Dropping data. > > > > > > it is probably same ivtv version in this kernel as in 2.6.22.1 ?? > > > > > > should I use ivtv from ivtvdriver.org instead of kernel version? I > > saw a few discussions on the list about DMA TIMEOUT, but I am not > > sure whether this was solved? > > > > I am asking this because the ivtvdriver homepage says: > > --------------- > > This release does NOT contain the ivtv driver proper, as that is now > > part of kernel 2.6.22. It does contain test tools, utilities and the > > ivtv-fb and saa717x drivers. > > --------------- > > > > that means that ivtv is not in the downloaded file? so I should > > expect no changes after compiling it? > > I would recommend upgrading to the v4l-dvb repository from > www.linuxtv.org. The DMA issues should be fixed in that repository. > > Messages like "all stream buffers full" mean that the application > reading from the device isn't reading fast enough. There have been > problems with MythTV and ivtv that are solved in the MythTV subversion > repository, if that's the app you are using. > > Regards, > > Hans > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > -- Glauben heißt nicht wissen wollen, was wahr ist ... Nietzsche _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
