>>>>> "H" == Hans Verkuil <[EMAIL PROTECTED]> writes:
H> On Saturday 22 December 2007 22:59, Ma Begaj wrote: >> Hi, >> >> I just upgraded kernel to 2.6.23.12 and I downloaded latest >> tip.tar.bz2 from >> http://www.linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2. >> >> I checked dmesg after upgrade and I found a new message in the >> log: .... ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >> ivtv0: Encoder revision: 0x02060039 cx25840 2-0044: loaded >> v4l-cx25840.fw firmware (16382 bytes) ivtv1: Loaded >> v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder >> revision: 0x02060039 tuner 3-0043: Tuner frontend module has no >> way to set config tuner 3-0043: Tuner frontend module has no way >> to set config tuner 3-0043: Tuner frontend module has no way to >> set config tuner 3-0043: Tuner frontend module has no way to set >> config ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >> ivtv2: Encoder revision: 0x02060039 tuner 4-0043: Tuner frontend >> module has no way to set config tuner 4-0043: Tuner frontend >> module has no way to set config tuner 4-0043: Tuner frontend >> module has no way to set config tuner 4-0043: Tuner frontend >> module has no way to set config >> >> >> Is this "Tuner frontend module has no way to set config" somehow >> important for the me and other users? Some kind of error or just >> an info? >> >> I have PVR500 and 150. H> It can be ignored. This message should either be removed or only H> printed when debug is on. H> Hans H> _______________________________________________ ivtv-devel mailing H> list [email protected] H> http://ivtvdriver.org/mailman/listinfo/ivtv-devel Hi, I did the same update today, and was concerned about the messages about the tuner. However, now another problem with after the upgrade. The .udelay = 8 gives me the following error again, and sound goes out. Don't know if it is the tuner changes or ivtv. tuner 2-0043: Tuner frontend module has no way to set config i2c-adapter i2c-2: sendbytes: error - bailout. tuner 2-0043: Tuner frontend module has no way to set config Anyway currently using .udelay = 9, and that seems to be fine for now. Will keep you updated. Thanks. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
