>>>>> "A" == A P Kennedy <[EMAIL PROTECTED]> writes:
>>>>> "H" == Hans Verkuil <[EMAIL PROTECTED]> writes: H> On Saturday 22 December 2007 22:59, Ma Begaj wrote: >>> Hi, >>> >>> I just upgraded kernel to 2.6.23.12 and I downloaded latest >>> tip.tar.bz2 from >>> http://www.linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2. >>> >>> I checked dmesg after upgrade and I found a new message in the >>> log: .... ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 >>> bytes) ivtv0: Encoder revision: 0x02060039 cx25840 2-0044: loaded >>> v4l-cx25840.fw firmware (16382 bytes) ivtv1: Loaded >>> v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder >>> revision: 0x02060039 tuner 3-0043: Tuner frontend module has no >>> way to set config tuner 3-0043: Tuner frontend module has no way >>> to set config tuner 3-0043: Tuner frontend module has no way to >>> set config tuner 3-0043: Tuner frontend module has no way to set >>> config ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >>> ivtv2: Encoder revision: 0x02060039 tuner 4-0043: Tuner frontend >>> module has no way to set config tuner 4-0043: Tuner frontend >>> module has no way to set config tuner 4-0043: Tuner frontend >>> module has no way to set config tuner 4-0043: Tuner frontend >>> module has no way to set config >>> >>> >>> Is this "Tuner frontend module has no way to set config" somehow >>> important for the me and other users? Some kind of error or just >>> an info? >>> >>> I have PVR500 and 150. H> It can be ignored. This message should either be removed or only H> printed when debug is on. H> Hans H> _______________________________________________ ivtv-devel mailing H> list [email protected] H> http://ivtvdriver.org/mailman/listinfo/ivtv-devel A> Hi, A> I did the same update today, and was concerned about the messages A> about the tuner. However, now another problem with after the A> upgrade. A> The .udelay = 8 gives me the following error again, and sound goes A> out. Don't know if it is the tuner changes or ivtv. A> tuner 2-0043: Tuner frontend module has no way to set config A> i2c-adapter i2c-2: sendbytes: error - bailout. tuner 2-0043: Tuner A> frontend module has no way to set config A> Anyway currently using .udelay = 9, and that seems to be fine for A> now. Will keep you updated. A> Thanks. Followup on my own post. When third card kicked in today with using .udelay = 9 (changed in ivtv-i2c.c) got the same error again. i2c-adapter i2c-3: sendbytes: error - bailout. msp3400 3-0040: I/O error #0 (read 0x10/0x200) The interesting thing is the sound did not cut off but became tinny or high pitched on all cards. Current using .udelay = 10. Will keep you updated. This is the latest pull of v4l-dvb. Later, Alan _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
