I have a Pentium 4 2Ghz machine here running Ubuntu 7.10. Overall it works great. Good picture/sound etc running mplayer or vlc on /dev/video0. It gets a little choppy running LiveTV with MythTV though. I think it is a problem with my MythTV setup though since mplayer and vlc seem to play the stream OK. But I thought I would post to you guys to see if you had any suggestions. And to give you some proper kudos. Thanks for the hard work.
I get this message in the mythtvbackend when it hangs. MPEGRec(/dev/video0) Error: select timeout - ivtv driver has stopped responding. Here is some relevant info. Installed via instructions on this page: http://ivtvdriver.org/index.php/Cx18 lspci -v output: 00:0e.0 Multimedia video controller: Conexant CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder Subsystem: Hauppauge computer works Inc. Unknown device 7400 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at d0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 dmesg info [ 24.406003] cx18: Start initialization, version 0.1.0 [ 24.406082] cx18-0: Initializing card #0 [ 24.406086] cx18-0: Autodetected Hauppauge card [ 24.406129] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 24.406280] cx18-0: cx23418 revision 01010000 (B) [ 24.557734] cx18-0: Autodetected Hauppauge HVR-1600 [ 24.915430] tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1) [ 24.916959] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) [ 24.916998] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 24.919557] cx18-0: Disabled encoder IDX device [ 24.919609] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 24.919674] cx18-0: Registered device video16 for TS (2 MB) [ 24.919715] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 24.919751] cx18-0: Registered device vbi0 for encoder VBI (1 MB) [ 24.919789] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 24.919826] cx18-0: Registered device radio0 for encoder radio [ 24.921026] cx18-0: Initialized card #0: Hauppauge HVR-1600 [ 24.921048] cx18: End initialization _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
