Hi Andy,
It works! I was able to capture video. I am yet to get Audio. Any idea?
-------------------------------
Output of 'v4l2-ctl --all' :
Driver Info:
Driver name : ivtv
Card type : Yuan PG600, Diamond PVR-550
Bus info : PCI:0000:03:01.0
Driver version: 66561
Capabilities : 0x01030051
Video Capture
VBI Capture
Sliced VBI Capture
Tuner
Audio
Read/Write
Format Video Capture:
Width/Height : 640/480
Pixel Format : 'MPEG'
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format Sliced VBI Capture:
Service Set :
Service Line 0: /
Service Line 1: /
Service Line 2: /
Service Line 3: /
Service Line 4: /
Service Line 5: /
Service Line 6: /
Service Line 7: /
Service Line 8: /
Service Line 9: /
Service Line 10: /
Service Line 11: /
Service Line 12: /
Service Line 13: /
Service Line 14: /
Service Line 15: /
Service Line 16: /
Service Line 17: /
Service Line 18: /
Service Line 19: /
Service Line 20: /
Service Line 21: /
Service Line 22: /
Service Line 23: /
I/O Size : 0
Format VBI Capture:
Sampling Rate : 27000000 Hz
Offset : 248 samples (9.18519e-06 secs after leading edge)
Samples per Line: 1440
Sample Format : GREY
Start 1st Field : 6
Count 1st Field : 18
Start 2nd Field : 318
Count 2nd Field : 18
Crop Capability Video Output:
Bounds : Left 0, Top 0, Width 720, Height 480
Default : Left 0, Top 0, Width 720, Height 480
Pixel Aspect: 10/11
Video input : 2 (Composite 1)
Audio input : 1 (Line In 1)
Frequency: 1076 (67.250000 MHz)
Video Standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K
Tuner:
Name : ivtv TV Tuner
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength/AFC : 100%/187500
Current audio mode : lang1
Available subchannels: mono lang2
---------------------------------------------------------------------------------------------
Thanks for your help.
Rajesh
On Wed, Nov 11, 2009 at 2:43 AM, Andy Walls <[email protected]> wrote:
> On Tue, 2009-11-10 at 15:50 +0300, Rajesh Padalia wrote:
>> Andy,
>> I got message when I did modprobe ivtv card=7 tuner=57:
>> "FATAL: Error inserting ivtv
>> (/lib/modules/2.6.31.5-117.fc12.x86_64/kernel/drivers/media/video/ivtv/ivtv.ko):
>> Unknown symbol in module, or unknown parameter (see dmesg)"
>
> Oops: that should have been
>
> # modprobe ivtv cardtype=7 tuner=57
>
> Please try again.
>
>
> For reference
>
> # modinfo ivtv
>
> will show you the possible module option names.
>
> Regards,
> Andy
>
>> dmesg:
>> ivtv0: info: Removing card
>> ivtv0: info: Stopping all streams
>> ivtv0: info: Stopping decoding
>> ivtv0: info: Preparing for firmware halt.
>> ivtv0: info: Stopping VDM
>> ivtv0: info: Stopping AO
>> ivtv0: info: pinging (?) APU
>> ivtv0: info: Stopping VPU
>> ivtv0: info: Resetting Hw Blocks
>> ivtv0: info: Stopping SPU
>> ivtv0: info: init Encoder SDRAM pre-charge
>> ivtv0: info: init Encoder SDRAM refresh to 1us
>> ivtv0: info: Sleeping for 600ms
>> ivtv0: i2c: i2c exit
>> tda9887 1-0043: destroying instance
>> ivtv0: info: releasing reg_mem
>> ivtv0: info: releasing enc_mem
>> ivtv 0000:03:01.0: PCI INT A disabled
>> ivtv: Removed Hauppauge WinTV PVR-150
>> ivtv: Unknown parameter `card'
>>
>> Thanks...
>> Rajesh
>>
>>
>> On Tue, Nov 10, 2009 at 3:25 AM, Andy Walls <[email protected]> wrote:
>> > On Mon, 2009-11-09 at 20:12 +0300, Rajesh Padalia wrote:
>> >> Hans,
>> >> Attached are pictures of the card. I can see there are three chips on the
>> >> card
>> >> 1. Conexant MPEG II A/V Encoder, CX23416-12,
>> >> 2. Hynix 417A, HY57V64322OCT-6
>> >> 3. Conexant, CX25843-24Z
>> >> On the card front it is written as 947D-4.
>> >>
>> >> Andy,
>> >> I haven't heard from Interact-TV yet.
>> >>
>> >> Thank you.
>> >>
>> >> Rajesh
>> >
>> > OK. The card is a little different than what I thought. The card
>> > should be straightforward to support.
>> >
>> > Here's an interesting post I found:
>> >
>> > http://www.ivtvdriver.org/pipermail/ivtv-users/2006-December/005240.html
>> >
>> > So first, could you try:
>> >
>> > (close all application that may have a /dev/video* device node open)
>> > # modprobe -r ivtv
>> > # modprobe ivtv card=7 tuner=57
>> >
>> >
>> > Card 7 (YUAN PG600/DIAMONDMM PVR-550) is a fairly simple design which
>> > has a good chance of matching your card given the picture and chips you
>> > list.
>> >
>> > Tune 57 (TUNER_PHILIPS_FQ1236A_MK4) is close to the FQ1236/F H-3, so it
>> > has a good chance of working as well.
>> >
>> > Regards,
>> > Andy
>> >
>> >> On Mon, Nov 9, 2009 at 1:23 PM, Hans Verkuil <[email protected]> wrote:
>> >> > On Saturday 07 November 2009 13:46:30 Rajesh Padalia wrote:
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv: Start initialization, version
>> >> >> 1.4.1
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: Initializing card 0
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: Unknown card: vendor/device:
>> >> >> [4444:0016]
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: subsystem
>> >> >> vendor/device: [1540:9673]
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: cx23416 based
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: Defaulting to Hauppauge WinTV
>> >> >> PVR-150 card
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: Please mail the vendor/device
>> >> >> and subsystem vendor/device IDs and what kind of
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: card you have to the
>> >> >> ivtv-devel mailinglist (www.ivtvdriver.org)
>> >> >> Nov 7 15:18:11 localhost kernel: ivtv0: Prefix your subject line with
>> >> >> [UNKNOWN IVTV CARD].
>> >> >>
>> >> >> _______________________________________________
>> >> >> ivtv-devel mailing list
>> >> >> [email protected]
>> >> >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>> >> >>
>> >> >>
>> >> >
>> >> > What card is it? I don't recognize the subsystem IDs, so I'd appreciate
>> >> > it
>> >> > if you can tell me the brand and model of the card and, if possible,
>> >> > mail me
>> >> > pictures of the card or, alternatively, list the chips that are on the
>> >> > card.
>> >> >
>> >> > Thanks,
>> >> >
>> >> > Hans
>> >> >
>> >> > --
>> >> > Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom
>> >> >
>> >
>> >
>>
>
>
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
