> -----Original Message----- > From: [email protected] [mailto:ivtv-devel- > [email protected]] On Behalf Of Devin Heitmueller > Sent: Thursday, November 19, 2009 7:30 AM > To: Discussion list for development of the IVTV driver > Subject: Re: [ivtv-devel] cx18: Reprise of YUV frame alignment > improvements > > On Thu, Nov 19, 2009 at 8:44 AM, Paulus, Mark G > <[email protected]> wrote: > > Andy, > > > > I have built this fine on my Debian Lenny box with a Backported > kernel > > 2.6.30~bpo1, amd64 flavor. > > > > However, I cannot build this on my mythbuntu box with a 2.6.31-amd64 > > kernel: > > Ubuntu/Debian screwed up their kernel headers packaging (this issue > occurs if you try to build the mainline v4l-dvb code too). > > To workaround, open v4l/.config and change the firedtv driver from "=m" > to "=n". > > Cheers, > > Devin > > -- > Devin J. Heitmueller - Kernel Labs > http://www.kernellabs.com > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel
By changing CONFIG_FIREDTV from =m to =n, I was able to get the new cx18 modules to build on my mythbuntu box. However, when I install them, I get no locking, absolutely zero. If I go back to the stock modules with the 2.6.31 kernel, then my card will once again lock. On the flip side, I can't seem to get much of anything out of the analog side of this card. Any pointers on where to look, or what kinds of things to look for to get the analog side working? All I get is black static when capturing on the analog side. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
