On Mon, 2009-11-23 at 17:32 +0000, Paulus, Mark G wrote: > By changing CONFIG_FIREDTV from =m to =n, I was able to get > the new cx18 modules to build on my mythbuntu box. However, > when I install them, I get no locking, absolutely zero. > If I go back to the stock modules with the 2.6.31 kernel, > then my card will once again lock. > > On the flip side, I can't seem to get much of anything out of the analog > side of this card. Any pointers on where to look, or what kinds of > things > to look for to get the analog side working? All I get is black static > when capturing on the analog side.
Sounds like you don't have a video signal (is the cable hooked up to the analog tuner assembly's TV input?) Maybe you're not on a good channel. Try $ ivtv-tune -L Frequency Maps: us-bcast us-cable [...] argentina australia-optus $ ivtv-tune -d /dev/video0 -t us-bcast -c 4 /dev/video0: 67.250 MHz To tune to the frequency of channel 4 in the US broadcast channel allocation (for example). $ v4l2-ctl -d /dev/video0 --log-status and look for a video signal being detected as "Present". Regards, Andy _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
