On Sat, 2010-10-09 at 16:47 -0400, Andy Walls wrote:
> On Fri, 2010-10-08 at 23:07 +0400, i-mak wrote:
> > Hi! 
> > Excuse for my bad English.
> > At me a problem with tv-tuner ( GotView dvd3 Hybrid )
> > 
> > $ lspci -v
> > 02:01.0 Multimedia video controller: Conexant Systems, Inc. CX23418 
> > Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio 
> > Decoder
> >     Subsystem: Device 5854:3343
> >     Flags: bus master, medium devsel, latency 32, IRQ 5
> >     Memory at f0000000 (32-bit, non-prefetchable) [size=64M]
> >     Capabilities: <access denied>
> >     Kernel modules: cx18
> > 

> I'll make a card entry for it in the cx18 driver.
> 
> When I am done with the patch, I will need you to test the patch and
> figure out which GPIO pin resets the XC3028 tuner chip.


Konstantin and i-mak,

I have a patch for you to test here:

        http://linuxtv.org/hg/~awalls/new-cards/raw-rev/4c4fc0cd8e7e

You will need to extract firmware from a Windows driver for the XC3028
tuner chip.  Here are the instructions:

        
http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#Firmware_Information

Here is the script to extrcat the firmware:

        
http://linuxtv.org/hg/v4l-dvb/raw-file/1da5fed5c8b2/linux/Documentation/video4linux/extract_xc3028.pl


I guessed at many parameters.  No TV from the RF will work reliably
until you guess the GPIO pin to reset the XC3028 tuner chip.  I guessed:

        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l1.62

but it could be wrong.


I also guessed at how the memeory timing should be configured, the
analog audio GPIO settings, which I2C bus controls the DVB-T
demodulator, and how the DVB-T demodulation should be configured:

        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l1.44
        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l1.54
        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l4.10
        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l4.26
        http://linuxtv.org/hg/~awalls/new-cards/rev/4c4fc0cd8e7e#l4.34

>From what I could read on the internet, the configuration of the GoTView
PCI DVD 3 Hybrid appeared to be very similar to the Yuan MPC718 and
PG-718.

Hopefully the patch works for at least Composite or S-Video in.

Regards,
Andy


_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to