Subject says it all really, Has anyone had any version of ivtv-fb work
with fedora core 3,
the 0.1.10-48.3_pre2_ck100zz.rhfc3.at from apt-get doesn't work, I've
tried building 0.2.0 (rc3)
and rc3a, everything segmentation faulted when I modprobed ivtv-fb (but
ivtv itself works fine[0])
Just in case it is user error ;-) I've put the dmesg of my attempt to
load rc3 (rc3a was near
enough identical), I'll keep trying if someone has had it working under
FC3, otherwise I'm going to
go back to FC2 and play with FC3 until someone fixes it.
After having a little look round there have been a fair few changes to
the framebuffer code
inbetween FC2 and FC3 so I'm wondering if something got broken in there
somewhere.
Thanks
David
[0] Although must admit not tried it for rc3 (at all) and only tried cat
/dev/video0 > test.mpg
for a few min under rc3a (which worked fine).
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3) loading
ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x0746 vendor: 0x1039
tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7245336
tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model
0x00a93494, Revision 0x00000001
ivtv: Radio detected
tuner: no version for "struct_module" found: kernel tainted.
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: video encoder driver version V 0.3 loaded
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Dec 6 2004 08:42:36
ivtv: i2c attach [client=MSP3418W-A2,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 using 8 131072 byte buffers 1048576 kbytes
total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes
total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8 using 16 65536 byte buffers 1048576 kbytes
total
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 1
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv
i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 3382, itv = 0x22c63e20
ivtv: ivtv_dec_thread: pid = 3383, itv = 0x22c63e20
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xc9510000, mapped to 0x23b10000, size 1620k
ivtv-osd: mode is 720x576x32, linelength=2880
Unable to handle kernel NULL pointer dereference at virtual address
00000000
printing eip:
00000000
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: ivtv_fb(U) msp3400(U) saa7127(U) saa7115(U) tuner(U)
tveeprom(U) ivtv(U) i2c_algo_bit i2c_core videodev md5 ipv6 autofs4
sunrpc button battery ac ohci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc gameport
snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sis900 floppy
dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod
CPU: 0
EIP: 0060:[<00000000>] Tainted: GF VLI
EFLAGS: 00010246 (2.6.9-1.681_FC3)
EIP is at 0x0
eax: 22a30bc0 ebx: 02360ce0 ecx: 22a30840 edx: 1d634ddc
esi: 176140b4 edi: 00000000 ebp: 22a30bc0 esp: 1d634d80
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 3466, threadinfo=1d634000 task=1ca9c850)
Stack: 021eac97 024147a0 00000000 1975c05a 00000000 00000001 ffffffff
0000005a
0000005a 00000008 00000000 00000000 00000000 00000000 0224a885
00000400
00000010 00000001 000000ff 021eea7b 021eebbf 176140b4 03411000
00000000
Call Trace:
[<021eac97>] accel_putcs+0x48c/0x4c7
[<0224a885>] end_that_request_last+0x6c/0x7e
[<021eea7b>] fb_sysmove_buf_aligned+0x0/0x37
[<021eebbf>] fb_sysmove_buf_unaligned+0x0/0xac
[<021eb7cb>] fbcon_putcs+0x74/0x7c
[<02228c70>] do_update_region+0x10f/0x154
[<0222972d>] redraw_screen+0x184/0x1b9
[<0222cb3b>] take_over_console+0x22d/0x2da
[<021ea42e>] fbcon_takeover+0x4a/0x74
[<021ee90d>] fbcon_fb_registered+0x15/0x1a
[<021ee94a>] fbcon_event_notify+0x38/0x62
[<0212f76d>] notifier_call_chain+0x17/0x2b
[<021f0749>] register_framebuffer+0x187/0x193
[<021f1fe9>] fb_alloc_cmap+0x8d/0xa0
[<2281e2e8>] init_module+0x2e8/0x340 [ivtv_fb]
[<2281e000>] init_module+0x0/0x340 [ivtv_fb]
[<0213be92>] sys_init_module+0x207/0x2ef
Code: <3>Debug: sleeping function called from invalid context at
include/linux/rwsem.h:43
in_atomic():0[expected: 0], irqs_disabled():1
[<0211cbcb>] __might_sleep+0x7d/0x8a
[<0215e726>] rw_vm+0x20e/0x47a
[<0215ee70>] get_user_size+0x30/0x57
[<0210682b>] show_registers+0x109/0x15e
[<02106a2f>] die+0x14a/0x241
[<0211937e>] do_page_fault+0x0/0x511
[<0211937e>] do_page_fault+0x0/0x511
[<02119733>] do_page_fault+0x3b5/0x511
[<0211b15f>] activate_task+0x53/0x5f
[<021efaea>] fb_set_var+0x89/0x147
[<0211d27c>] autoremove_wake_function+0xd/0x2d
[<0211bbeb>] __wake_up_common+0x36/0x51
[<0211937e>] do_page_fault+0x0/0x511
[<021eac97>] accel_putcs+0x48c/0x4c7
[<0224a885>] end_that_request_last+0x6c/0x7e
[<021eea7b>] fb_sysmove_buf_aligned+0x0/0x37
[<021eebbf>] fb_sysmove_buf_unaligned+0x0/0xac
[<021eb7cb>] fbcon_putcs+0x74/0x7c
[<02228c70>] do_update_region+0x10f/0x154
[<0222972d>] redraw_screen+0x184/0x1b9
[<0222cb3b>] take_over_console+0x22d/0x2da
[<021ea42e>] fbcon_takeover+0x4a/0x74
[<021ee90d>] fbcon_fb_registered+0x15/0x1a
[<021ee94a>] fbcon_event_notify+0x38/0x62
[<0212f76d>] notifier_call_chain+0x17/0x2b
[<021f0749>] register_framebuffer+0x187/0x193
[<021f1fe9>] fb_alloc_cmap+0x8d/0xa0
[<2281e2e8>] init_module+0x2e8/0x340 [ivtv_fb]
[<2281e000>] init_module+0x0/0x340 [ivtv_fb]
[<0213be92>] sys_init_module+0x207/0x2ef
Bad EIP value.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
