Hmm.. double-checked that. Check out the lsmod output below, note that tveeprom is loaded before tuner, and eeprom not at all. I also tried loading it first, rather than letting ivtv auto-load it.
Also, I assume that the "firmware not found" message has to do with finding the firmware on the card, not in /lib/modules, but I'll try replacing those files and see if that helps... Thanks! On Monday December 6 2004 07:41, Brian Jackson wrote: > The 2 clues are: > Possible causes: the tveeprom module was not loaded, or > the eeprom kernel module was loaded before the tveeprom module > AND > Error locating firmware. > > Looks like you need to either move the eeprom module away (if it isn't > being used), or make sure tveeprom gets loaded first. > It also looks like your firmware went MIA. > > --Brian Jackson > > On 7:55:39 am 2004-12-06 Carl <[EMAIL PROTECTED]> wrote: > > This is from a setup that's been working well for almost a year. > > > > I recently rebooted, and was no longer able to get ivtv to load. > > This was with a kernel and ivtv module that was working great. > > > > Userspace packages were updated, including possibly lirc, but > > otherwise it is the same system is was before this happened. > > I've even rolled back a few kernel and ivtv versions. > > > > Before I get desperate and replace the card, can anyone see > > anything here that might offer clues? I have no opportunity to > > run Windows, unless someone wants to give me a PCMCIA to > > PCI adapter... > > > > I tried loading tveeprom first, that didn't change anything. It > > also didn't put any messages in the log. Any chance there is > > an i2c issue? > > > > Also, these "over-current change on port 1" messages seem to > > be from USB, but they appear when I modload ivtv, nearly in > > the same spot each time. not sure if they did before, but I'll > > check... > > > > Dec 6 02:42:25 mythtv ivtv: ==================== START INIT IVTV > > ==================== Dec 6 02:42:25 mythtv ivtv: version 0.3.1 (x) > > loading Dec 6 02:42:25 mythtv ivtv: Linux version: 2.6.9-gentoo-r4 > > preempt CYRIXIII 4KSTACKS gcc-3.4 Dec 6 02:42:25 mythtv ivtv: In > > case of problems please include the debug info Dec 6 02:42:25 mythtv > > ivtv: between the START INIT IVTV and END INIT IVTV lines when Dec 6 > > 02:42:25 mythtv ivtv: mailing the ivtv-devel mailinglist. Dec 6 > > 02:42:25 mythtv ivtv: Autodetected WinTV PVR 350 card Dec 6 02:42:25 > > mythtv ivtv: Found an iTVC15 based chip Dec 6 02:42:25 mythtv PCI: > > Enabling device 0000:00:14.0 (0004 -> 0006) Dec 6 02:42:25 mythtv > > ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 11 (level, low) -> IRQ 11 > > Dec 6 02:42:25 mythtv ivtv: Unreasonably low latency timer, setting to > > 64 (was 32) Dec 6 02:42:25 mythtv ivtv: VIA PCI device: 0x0601 > > vendor: 0x1106 Dec 6 02:42:25 mythtv ivtv: i2c client addr: 0x50 not > > found! Dec 6 02:42:25 mythtv ivtv: Error -19 reading Hauppauge > > eeprom. Dec 6 02:42:25 mythtv ivtv: Possible causes: the tveeprom > > module was not loaded, or Dec 6 02:42:25 mythtv ivtv: the eeprom > > kernel module was loaded before the tveeprom module. Dec 6 02:42:25 > > mythtv tuner: Ignoring new-style parameters in presence of obsolete > > ones Dec 6 02:42:25 mythtv saa7115: starting probe for adapter ivtv > > i2c driver #0 (0x10005) Dec 6 02:42:25 mythtv saa7127: Ignoring > > new-style parameters in presence of obsolete ones Dec 6 02:42:25 > > mythtv saa7127: video encoder driver version V 0.3 loaded Dec 6 > > 02:42:27 mythtv hub 2-0:1.0: over-current change on port 1 Dec 6 > > 02:42:27 mythtv hub 2-0:1.0: over-current change on port 2 Dec 6 > > 02:42:27 mythtv ivtv: Encoder mailbox not found Dec 6 02:42:27 > > mythtv ivtv: Decoder mailbox not found Dec 6 02:42:27 mythtv ivtv: > > Error locating firmware. Dec 6 02:42:27 mythtv ivtv: Error -12 on > > initialization Dec 6 02:42:27 mythtv ivtv-iTVC15_16_mpg2_encoder_card > > > > : probe of 0000:00:14.0 failed with error -12 > > > > Dec 6 02:42:27 mythtv ivtv: ==================== END INIT IVTV > > ==================== > > > > Here's what lsmod looks like. I didn't load tveeprom first this > > time, and have used up to 2.6.9-gentoo-r9 and ivtv-0.3.1 (z): > > > > [503] # uname -a > > Linux mythtv 2.6.9-gentoo-r4 #1 Sun Nov 21 15:50:23 EST 2004 i686 VIA > > Samuel 2 CentaurHauls GNU/Linux [504] # lsmod > > Module Size Used by > > lirc_i2c 6692 0 > > lirc_dev 10860 1 lirc_i2c > > msp3400 24376 0 > > saa7127 11036 0 > > saa7115 10904 0 > > tuner 18276 0 > > tveeprom 10644 0 > > ivtv 801252 0 > > i2c_algo_bit 8296 1 ivtv > > i2c_core 18608 7 lirc_i2c,msp3400,saa7127,saa7115,tuner > > ,tveeprom,i2c_algo_bit > > videodev 7296 1 ivtv > > via_rhine 17764 0 > > [505] # > > > > > > ------------------------------------------------------- > > SF email is sponsored by - The IT Product Guide > > Read honest & candid reviews on hundreds of IT Products from real > > users. Discover which products truly live up to the hype. Start > > reading now. http://productguide.itmanagersjournal.com/ > > _______________________________________________ > > ivtv-devel mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://productguide.itmanagersjournal.com/ > _______________________________________________ > ivtv-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
