On Wed, 08 Dec 2004 08:06:59 +0100, Michel Verbraak <[EMAIL PROTECTED]> wrote:
> Which tuner do you use? Could you specify the full ivtv dmesg/syslog > logging. > > Not sure if this is of general interest to the ivtv developers, but here you go. I'm using tuner 39, which is something I picked up reading various threads. It's actually some tuner not yet in the bttv tuner.c, and I was too fat and lazy to apply patches. It works just fine, even for channels > 60. In any event: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.1 (y) loading ivtv: Linux version: 2.6.9-gentoo-r6 K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 ivtv: XXX PCI device: 0x01e0 vendor: 0x10de cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values ivtv: i2c attach [client=cx25840[2],ok] cx25840: status: (0x40C) 0x00 (0x40D) 0x81, (0x40E) 0x7d wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: writing init values ivtv: i2c attach [client=wm8775[2],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 39 (LG NTSC (newer TAPC series)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Setting Tuner 39 cx25840: decoder set input (6) cx25840: now setting Composite input ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
