The reason you don't see msp3400 or saa7115 is that those two chips have been replaced by a single Conexant CX25840 Broadcast Audio/Video decoder chip. That is what has helped to make the PVR-150 a less expensive card.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Hammack Sent: Saturday, January 01, 2005 2:59 PM To: [email protected] Subject: Re: [ivtv-devel] pvr-150 video, no audio or remote for what it's worth, i'm not seeing Jarod's problem with "tuner=50." I have a PVR-150 and get great tuner video, but no audio. Composite video is great, but S-video gives me only a grey screen with no indication of any signal (black when there's no input.) Regarding audio, I'm curious as to why msp3400 and saa7115 don't show up in my lsmod? Jim modules.conf: # WinTV PVR-150 alias char-major-81 videodev alias char-major-81-0 ivtv add below ivtv msp3400 saa7115 tuner # end dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (a) loading ivtv: Linux version: 2.6.10 K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: VIA PCI device: 0x3099 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values ivtv: i2c attach [client=cx25840[0],ok] cx25840: status: (0x40C) 0x00 (0x40D) 0x81, (0x40E) 0x35 wm8775: Ignoring new-style parameters in presence of obsolete ones wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: writing init values ivtv: i2c attach [client=wm8775[0],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Could not detect tuner standard, defaulting to NTSC. tuner: tuner type not set cx25840: decoder set input (6) cx25840: now setting Composite input ivtv: Switching standard to NTSC. tuner: tuner type not set cx25840: decoder set norm NTSC cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== lsmod: bash-2.05b# lsmod Module Size Used by wm8775 5080 0 cx25840 27352 0 tuner 20516 0 ivtv 811268 0 snd_pcm_oss 47908 0 snd_mixer_oss 17344 1 snd_pcm_oss ipv6 213632 10 natsemi 23456 0 snd_pcm 79496 1 snd_pcm_oss snd_timer 20036 1 snd_pcm snd_page_alloc 7492 1 snd_pcm snd 43620 4 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ----- Original Message ----- From: "Jarod Wilson" <[EMAIL PROTECTED]> To: [email protected] Subject: Re: [ivtv-devel] pvr-150 video, no audio or remote Date: Thu, 30 Dec 2004 15:18:27 -0800 > > On Thursday 30 December 2004 12:10, Robert Brewer wrote: > > tuner type 50 does work for me, but I have to explicitly: > > modprobe tuner type=50 > > modprobe ivtv > > for it to work. For some reason > > modprobe ivtv > > by itself with options ivtv tuner=50 in my /etc/modules.conf isn't working. > > That's odd... > > > I have captured live TV video with it. But I'm willing to wait for > > the video and audio to work, in the meantime it would be really nice > > to have the remote working so I could listen to my music in mythmusic > > more easily. > > Ah, I thought you said you'd only captured static, which assuming you had a > valid source connected, would mean the tuner likely wasn't set correctly. > > Right now, I'd just like to be able to load the driver without my machine > kp'ing. :-) > > -- > Jarod C. Wilson, RHCE > [EMAIL PROTECTED] << 2.dat >> Jim Hammack [EMAIL PROTECTED] ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
