On 01/01/2005 02:30 PM, Larry W Stewart Jr wrote:
Do I have yet another new tuner? Couldn't find this anywhere searching the
list. I tried tuner type 39 and it seems to work, then tried patching the tuner
module and tried type 50 and it seems to work. This is what I get from
tveeprom.
tvee: Hauppauge: model=32032, rev=B382, serial#=7260372 tvee: tuner=<unknown> (idx=82, type=-1) tvee: tuner fmt=NTSC(M) (eeprom=0x08, v4l2=0x00001000) tvee: audio_processor=MSP3440 (type=11)
Your tuner is known (it is a type 39) and supported (for autodetection, even) in current versions of ivtv. Note that using type 50 will give you problems with certain "transition" channels.
BTW, you might want to upgrade from 0.1.9 to the most current 0.2.0-rc release ( http://ivtv.no-ip.com/ ). Then, just make sure you adjust your module options--remove everything except:
# WinTV PVR-x50 support alias char-major-81 videodev alias char-major-81-0 ivtv
and, if you have a PVR-350 and are using its TV out, you can add a line to load ivtv-fb after ivtv is loaded (format will differ depending on whether you're using Linux 2.4 or Linux 2.6).
Mike
------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
