> > I get the same problem over and over. > > As far as I can find, it is has to do with the saa7127 and the cx25840 > sharing the same i2c address. > > When I specify the i2c_enable option for these two modules I can not > turn off the saa7127 for the pvr-150. > > (modprobe saa7127 i2c_enable=-1) does not work for me. > > If you only have a PVR-150, i also have a pvr-350, then leave the > saa7127 module out of your startup script. > > Today I'm going to test my pvr-150 on a different system, different > motherboard and chipset, to see if this changes anything. > Exactly the same over here (see earlier post). Also in combination with a PVR-350. Different settings for i2c_enable gives me the same result or in some cases a kernel panic! I verified the card and it is working in Windows XP. I am curious. Is there someone who has the card working in a multi-card setup? Or has it to do with the PVR-350-combi?
Greets peter ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
