Hi folks -
In the couple days since my last post, I have narrowed this down to a problem of not getting any autio from my captures.
I have done my best to search for possible solutions, and have tried all that I have been able to find.
This includes:
1.) The card is not muted (verified through ivtvctl 2.) I am loading the correct msp3400 module 3.) The msp3400 appears to be properly detecting my tuner.
My ivtv log can be found at:
http://shadyware.net/ivtv.log
Could someone please let me know if there are any other common causes of this symptom, or propose other steps I might take to get this audio to work?
Thanks, /-Will
Will Otte wrote:
Hi folks -
The only thing that I currently lack from full ivtv functionality is sound coming from the outputs of the PVR 350, either while watching live tv in mythtv, or piping output directly from video0 to video16.
Based on my searching and googling, the most common causes of this error are:
1.) failure to connect the output of the 350 to the line in of the myth box 2.) muted line in on the mixer 3.) missing or wrong msp3400 module
I don't believe that 1 or 2 apply to me, as I have carefully checked both conditions, and currently have the outputs of the 350 plugged into the line in on my Powerbook (so that I can monitor the output, as I don't have a TV convenient to my myth box at this time). I get no audio in either live tv mode or piping directly to video16.
I am also fairly certain that I am not pulling in the wrong msp3400 module. I have removed the one that came with the kernel, and replaced it with the version from my hand compiled rc3d sources.
The msp3400 module appears to be loading properly (from my dmesg)
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Jan 23 2005 17:38:19
and the modinfo output...
filename: /lib/modules/2.6.10-1.741_FC3/extra/msp3400.ko
parm: probe:List of adapter,address pairs to scan additionally
parm: probe_range:List of adapter,start-addr,end-addr triples to scan additionally
parm: ignore:List of adapter,address pairs not to scan
parm: ignore_range:List of adapter,start-addr,end-addr triples not to scan
parm: force:List of adapter,address pairs to boldly assume to be present
description: device driver for msp34xx TV sound processor
author: Gerd Knorr
license: GPL
vermagic: 2.6.10-1.741_FC3 686 REGPARM 4KSTACKS gcc-3.4
depends: i2c-core
srcversion: E960148AF5BD27CA1F27860
Do I have the correct msp3400 version? Is there anything else tha tmight cause this behavior?
Thanks,
/-Will
------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
