Hi,
dunno if anyone is following me answering myself on this thread but...I think I have found the problem here. It looks like the cards were overheating. I've added an extra fan sucking air from around the cards and haven't had a problem since. Recordings are now working excellently, but the machine sounds like a rocket ship :-)
thanks again for all your work guys,
Neale.
Neale Swinnerton wrote:
Hi,
I know you guys have put loads of work in on this and it's much appreciated by everyone on this list I'm sure, Has anyone got any idea on this?
I've now taken out the PVR250 card, because I thought it was some weird interaction between the two cards, but I've now managed to get the problem with just the PVR-350.
I managed to up the debug level to 255 about 2 seconds after the problem started to occur and I get this which hopefully will shed some light. I've attached the ivtv stuff from /var/log/messages and the output of lspci -v. (Note that I 'fixed' the erroneous version reporting in 0.2.0.rc3d, so this *really* is that version).
thanks
Neale.
Here's a snippet of the debug output v. shortly after the problem occured, I've attached a longer trace too.
Jan 19 20:27:34 shankly ivtv: v4l2 close Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x80000000 ====== Jan 19 20:27:34 shankly ivtv: IRQ ENC DMA Jan 19 20:27:34 shankly ivtv: ENC: Sched DMA Jan 19 20:27:34 shankly ivtv: DMA/MPG type 0x00000000,size 0x00008000,offset 0x001222dc Jan 19 20:27:34 shankly ivtv: ENC: Got FREE Buff with 0 bytes. Jan 19 20:27:34 shankly ivtv: ENC: Got FREE Buff with 0 bytes. Jan 19 20:27:34 shankly ivtv: Sched dma: addr: 0x1d4d0000, SG_length: 2, array_size 0x00008000, type 0x00000000 Jan 19 20:27:34 shankly ivtv: ENC: DMA Done Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: encoder thread sleeping 5715 Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: Gather 1: x=2 bytes_needed 0x0003e800 buf_fill 0x00008000 Jan 19 20:27:34 shankly ivtv: ENC: read 32768, 223232 bytes left Jan 19 20:27:34 shankly ivtv: v4l2 read Jan 19 20:27:34 shankly ivtv: ivtv_read: stream 0.. Jan 19 20:27:34 shankly ivtv: ENC: 256 bufs, 0x00000000 fill; 256 free 0 dma 0 full 0 io Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: Gather 1: x=0 bytes_needed 0x0003e800 buf_fill 0x00000000 Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: Gather 1: x=0 bytes_needed 0x0003e800 buf_fill 0x00000000 Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x00000400 ====== Jan 19 20:27:34 shankly ivtv: IRQ Decoder Vsync Jan 19 20:27:34 shankly ivtv: ======= valid IRQ bits: 0x80000000 ====== Jan 19 20:27:34 shankly ivtv: IRQ ENC DMA Jan 19 20:27:34 shankly ivtv: ENC: Sched DMA Jan 19 20:27:34 shankly ivtv: DMA/MPG type 0x00000000,size 0x00005000,offset 0x0012a2dc Jan 19 20:27:34 shankly ivtv: ENC: Got FREE Buff with 0 bytes. Jan 19 20:27:34 shankly ivtv: ENC: Got FREE Buff with 0 bytes. Jan 19 20:27:34 shankly ivtv: Sched dma: addr: 0x1d4d0000, SG_length: 2, array_size 0x00008000, type 0x00000000 Jan 19 20:27:34 shankly ivtv: ENC: DMA Done Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: encoder thread sleeping 5715 Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: Gather 1: x=2 bytes_needed 0x0003e800 buf_fill 0x00005000 Jan 19 20:27:34 shankly ivtv: ENC: read 20480, 235520 bytes left Jan 19 20:27:34 shankly ivtv: v4l2 read Jan 19 20:27:34 shankly ivtv: ivtv_read: stream 0.. Jan 19 20:27:34 shankly ivtv: ENC: 256 bufs, 0x00000000 fill; 256 free 0 dma 0 full 0 io Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list! Jan 19 20:27:34 shankly ivtv: deqbuf: 0 DeQ from empty list!
------------------------------------------------------------------------
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 8081 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at dc000000 (32-bit, non-prefetchable) Capabilities: [c0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: db800000-dbffffff Prefetchable memory behind bridge: e8000000-f3ffffff Expansion ROM at 0000d000 [disabled] [size=4K] BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at e600 [size=32]
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Interrupt: pin ? routed to IRQ 11 Region 4: I/O ports at a400 [size=16]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: Asustek Computer, Inc.: Unknown device 8095 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 12 Region 0: I/O ports at 9400 Region 1: I/O ports at 9000 [size=128] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: Memory at da800000 (32-bit, non-prefetchable)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), cache line size 08 Interrupt: pin B routed to IRQ 4 Region 0: Memory at da000000 (32-bit, non-prefetchable)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), cache line size 08 Interrupt: pin C routed to IRQ 3 Region 0: Memory at d9800000 (32-bit, non-prefetchable)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max) Interrupt: pin D routed to IRQ 7 Region 0: Memory at d9000000 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) Subsystem: Asustek Computer, Inc. A7V8X motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 12 Region 0: Memory at d8800000 (32-bit, non-prefetchable) Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:00:13.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (32000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 12 Region 0: Memory at e0000000 (32-bit, prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc.: Unknown device 8081 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: Memory at e8000000 (32-bit, prefetchable) Region 1: Memory at db800000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d800 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
------------------------------------------------------------------------
Jan 18 22:28:38 shankly ivtv: ==================== START INIT IVTV ====================
Jan 18 22:28:38 shankly ivtv: version 0.2.0 (rc3d) loading
Jan 18 22:28:38 shankly ivtv: Linux version: 2.6.10-gentoo-r4 PENTIUM4 gcc-3.3
Jan 18 22:28:38 shankly ivtv: In case of problems please include the debug info
Jan 18 22:28:38 shankly ivtv: between the START INIT IVTV and END INIT IVTV lines when
Jan 18 22:28:38 shankly ivtv: mailing the ivtv-devel mailinglist.
Jan 18 22:28:38 shankly ivtv: Autodetected WinTV PVR 350 card
Jan 18 22:28:38 shankly ivtv: Found an iTVC15 based chip
Jan 18 22:28:38 shankly ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Jan 18 22:28:38 shankly ivtv: XXX PCI device: 0x0651 vendor: 0x1039
Jan 18 22:28:38 shankly lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Jan 18 22:28:38 shankly ivtv: i2c attach [client=Hauppauge IR,ok]
Jan 18 22:28:38 shankly lirc_dev: lirc_register_plugin:sample_rate: 10
Jan 18 22:28:38 shankly tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 6814804
Jan 18 22:28:38 shankly tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
Jan 18 22:28:38 shankly tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
Jan 18 22:28:38 shankly tveeprom: audio_processor = CS5331 (type = 9)
Jan 18 22:28:38 shankly ivtv: i2c attach [client=tveeprom[0],ok]
Jan 18 22:28:38 shankly ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 0x00a93494, Revision 0x00000001
Jan 18 22:28:38 shankly ivtv: Radio detected
Jan 18 22:28:38 shankly tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Jan 18 22:28:38 shankly ivtv: i2c attach [client=(tuner unset),ok]
Jan 18 22:28:38 shankly saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 18 22:28:38 shankly saa7115: detecting saa7115 client on address 0x42
Jan 18 22:28:38 shankly saa7115: writing init values
Jan 18 22:28:38 shankly ivtv: i2c attach [client=saa7115[0],ok]
Jan 18 22:28:38 shankly saa7115: status: (1E) 0x00, (1F) 0xc0
Jan 18 22:28:38 shankly saa7127: video encoder driver version V 0.3 loaded
Jan 18 22:28:38 shankly saa7127: Selecting NTSC video Standard
Jan 18 22:28:38 shankly saa7127: Selecting S-Video+Composite
Jan 18 22:28:38 shankly saa7127: Turn WSS off
Jan 18 22:28:38 shankly saa7127: Widescreen Mode 4:3 Full Format
Jan 18 22:28:38 shankly saa7127: Selecting Normal Encoder Input
Jan 18 22:28:38 shankly saa7127: Enable Video Output
Jan 18 22:28:38 shankly ivtv: i2c attach [client=saa7127[0],ok]
Jan 18 22:28:38 shankly msp34xx: ivtv version
Jan 18 22:28:38 shankly msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Jan 18 22:28:38 shankly msp34xx: $Id$ compiled on: Jan 18 2005 08:21:52
Jan 18 22:28:38 shankly ivtv: i2c attach [client=MSP3418W-A2,ok]
Jan 18 22:28:38 shankly ivtv: Encoder revision: 0x02040011
Jan 18 22:28:38 shankly ivtv: Decoder revision: 0x02020023
Jan 18 22:28:38 shankly ivtv: Configuring WinTV PVR 350 card with 9 streams
Jan 18 22:28:38 shankly ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 0 minor 0
Jan 18 22:28:38 shankly ivtv: Create DMA stream 1 Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 1 minor 32
Jan 18 22:28:38 shankly ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 2 minor 224
Jan 18 22:28:38 shankly ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 3 minor 24
Jan 18 22:28:38 shankly ivtv: Create stream 4 Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 4 minor 64
Jan 18 22:28:38 shankly ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 5 minor 16
Jan 18 22:28:38 shankly ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 6 minor 228
Jan 18 22:28:38 shankly ivtv: Create stream 7 Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 7 minor 232
Jan 18 22:28:38 shankly ivtv: Create DMA stream 8 Jan 18 22:28:38 shankly ivtv: Registered v4l2 device, streamtype 8 minor 48
Jan 18 22:28:38 shankly ivtv: Setting Tuner 1
Jan 18 22:28:38 shankly tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c driver #0
Jan 18 22:28:38 shankly ivtv: Setting audio matrix to input 3, output 1
Jan 18 22:28:38 shankly ivtv: Switching standard to PAL.
Jan 18 22:28:38 shankly ivtv: ivtv_enc_thread: pid = 5715, itv = 0xde9d9b20
Jan 18 22:28:38 shankly ivtv: ivtv_dec_thread: pid = 5716, itv = 0xde9d9b20
Jan 18 22:28:38 shankly ivtv: i2c client addr: 0x43 not found!
Jan 18 22:28:38 shankly saa7115: decoder set norm PAL
Jan 18 22:28:38 shankly saa7115: set audio: 0x01
Jan 18 22:28:38 shankly saa7127: Setting Encoder Video Standard
Jan 18 22:28:38 shankly saa7127: Set PAL Video Mode
Jan 18 22:28:38 shankly saa7127: Selecting PAL video Standard
Jan 18 22:28:38 shankly ivtv: Initialized WinTV PVR 350, card #0
Jan 18 22:28:38 shankly ivtv: ==================== END INIT IVTV ====================
------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
