John,
I applied the patch to 0.3.2c, but no success with my PVR-150 NTSC (tuner=50.)
I get:
no audio with tuner input (ivtvctl -p 6)
tuner audio + composite audio with composite input (ivtvctl -p 2)
tuner audio + composite (or s-video?) audio with s-video input (ivtvctl -p 0)
It looks like no change from the un-patched version for me. I confirmed that
the patch is applied, modules re-made and installed.
Anything I can check to help troubleshoot this?
Jim
----- Original Message -----
From: "John Eckhart" <[EMAIL PROTECTED]>
To: ivtv <[email protected]>
Subject: [ivtv-devel] PATCH: PVR-150 audio patch (should work for NTSC and PAL)
Date: Tue, 1 Feb 2005 19:06:56 -0500
>
> Hi all,
>
> It looks like the PAL cards are pulling the audio from a different
> path on the cx25840 chip than the NTSC cards. I'm not sure why, and I
> don't know the architecture of the cards or the chip well enough to
> hazard a guess. I have updated my patch so that it changes the path
> source depending on the tuner type (for now, it's between NTSC and
> PAL). I think in the future we may need to break it down even further,
> perhaps by tuner type or by card. I don't know how to determine these
> yet, but I am open to suggestions.
>
> Here is the patch that should work for NTSC AND PAL cards. Note: This
> is patched off of a clean 0.3.2c source line, but it should work will
> for the 0.3.2b sources as well.
>
> Good luck, let me know how it goes!
>
> John
<< audio_pvr150.patch >>
Jim Hammack
[EMAIL PROTECTED]
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
