Re: [ivtv-devel] PVR150 /dev/video0 > test.mpg is zero length

[Scott Carr]

Jarod Wilson wrote: On Thursday 10 March 2005 16:09, Scott Carr wrote: Capture log output between the ivtv start and stop markers in /var/log/message, then ship it off to the list. We can help you much better if you show some logs.   I sent the dmesg output with the first message I sent to the list.  Does the /var/log/message file have different messages? Ah, somehow I missed that, sorry. Oh, you called it "less". I didn't realize what that was. Looking at it now... No, that's not much help. Please get the output from this: tac /var/log/messages | sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p; /= START INIT IVTV =/q' | tac Ok please find attached the dmesg output after loading the drivers and running a cat /dev/video0 > test.mpg. Hope this helps you help me.  ;-)  Thanks -- Scott Carr OpenOffice.org Documentation Co-Lead http://documentation.openoffice.org

ivtv: Removing Card #0.
ivtv: Removed WinTV PVR 150, card #0
Linux video capture interface: v1.00
cx25840: Ignoring new-style parameters in presence of obsolete ones
tuner: Unknown parameter `tuner'
tuner: Ignoring new-style parameters in presence of obsolete ones
wm8775: Unknown parameter `mixer_input'
wm8775: Ignoring new-style parameters in presence of obsolete ones
wm8775: Init
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (f) loading
ivtv: Linux version: 2.6.10-gentoo-r6 K6 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x0530 vendor: 0x1039
tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 2903280
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[0],ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: client id: cx25840_i2c_id 0, skipped
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
wm8775: detecting client on address 0x36
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
wm8775: Updating reg[R11]=1620 added ADCWL with default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
wm8775: Updating reg[R12]=1800 added ADCMS with default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
wm8775: Updating reg[R13]=1a00 added AINPD with default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default 0
wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
wm8775: Updating reg[R14]=1ccf added LAG with default 207
wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
wm8775: Updating reg[R15]=1ecf added RAG with default 207
wm8775: Updating reg[R16]=2000 added LCSEL with default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
wm8775: Updating reg[R16]=207b added LCT with default 11
wm8775: Updating reg[R17]=2200 added LCEN with default 0
wm8775: Updating reg[R17]=2200 added ALCZC with default 0
wm8775: Updating reg[R17]=2200 added HLD with default 0
wm8775: Updating reg[R18]=2430 added DCY with default 3
wm8775: Updating reg[R18]=2432 added ATK with default 2
wm8775: Updating reg[R19]=2600 added NGTH with default 0
wm8775: Updating reg[R19]=2600 added NGAT with default 0
wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
wm8775: Updating reg[R21]=2a01 added AMX with default 1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
wm8775: Updating reg[R11]=1620 added ADCWL with default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
wm8775: Updating reg[R12]=1800 added ADCMS with default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
wm8775: Updating reg[R13]=1a00 added AINPD with default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default 0
wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
wm8775: Updating reg[R14]=1ccf added LAG with default 207
wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
wm8775: Updating reg[R15]=1ecf added RAG with default 207
wm8775: Updating reg[R16]=2000 added LCSEL with default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
wm8775: Updating reg[R16]=207b added LCT with default 11
wm8775: Updating reg[R17]=2200 added LCEN with default 0
wm8775: Updating reg[R17]=2200 added ALCZC with default 0
wm8775: Updating reg[R17]=2200 added HLD with default 0
wm8775: Updating reg[R18]=2430 added DCY with default 3
wm8775: Updating reg[R18]=2432 added ATK with default 2
wm8775: Updating reg[R19]=2600 added NGTH with default 0
wm8775: Updating reg[R19]=2600 added NGAT with default 0
wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
wm8775: Updating reg[R21]=2a01 added AMX with default 1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 4 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Setting Tuner 39
tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #0
ivtv: i2c client addr: 0x44 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 9210, itv = 0xc63f29c0

# This is after doing 'cat /dev/video0 > test.mpg' #

ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!
ivtv: i2c client addr: 0x44 not found!