My KT333 motherboard just reset all the time. the Intel chipsets have worked beautifully.
I can't at all use any of the capture cards on my test machine because this particular chipset won't work with this card. I think Jarod's had better luck with VIA, but the consensus is to steer away from their chipsets. Jason --- Robert Del Huerto <[EMAIL PROTECTED]> wrote: > I downloaded the ivtv-0.3.2j source and configured > my card as > instructed. When I do 'cat /dev/video0 > test.mpg' > my computer would > reboot after about 10 seconds of video capture. > > Later, I installed the following from atrpms.net: > kernel-2.6.10-1.770_14.rhfc3.at > video4linux-kmdl-2.6.10-1.770_14.rhfc3.at-20050310_100754-57.rhfc3.at > ivtv-kmdl-2.6.10-1.770_14.rhfc3.at-0.3.2i-72.rhfc3.at > > ...and for a moment I thought the problem was gone. > But, after about 3 > minutes of video capture my computer rebooted. This > happened whether I > was running the capture from a command line > (runlevel 3) or KDE. > > Any help will be greatly appreciated. > > My system is: > AMD Athlon 1800 > Biostar M7VIT motherboard > with a VIA VT8377 (KT400)/VT8235 chipset > and a Winbond W83697HF > NVidia FX video card > 1GB RAM > Hauppauge 500MCE > Fedora Core 3 > 480W Power Supply > > and my ivtv log is as follows: > > ivtv: ==================== START INIT IVTV > ==================== > ivtv: version 0.3.2 (i) loading > ivtv: Linux version: 2.6.10-1.770_14.rhfc3.at 686 > REGPARM gcc-3.4 > ivtv: In case of problems please include the debug > info > ivtv: between the START INIT IVTV and END INIT IVTV > lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: Unreasonably low latency timer, setting to 64 > (was 32) > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > tveeprom: The eeprom says no radio is present, but > the tuner type > tveeprom: indicates otherwise. I will assume that > radio is present. > tveeprom: Hauppauge: model = 23552, rev = D492, > serial# = 7805262 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, > type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = > 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[0],ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, > Radio: yes, Model > 0x00914652, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > tuner: Ignoring new-style parameters in presence of > obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: Ignoring new-style parameters in presence > of obsolete ones > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of > size 13353 loaded. > cx25840: FW image md5 digest: > aa4d1e3dd17667957d8fe5b8d2d19395 > cx25840: FW image sha1 digest: > 60eafed58e943664aae4754b32271e09a95496b4 > ivtv: i2c attach [client=cx25840[0],ok] > wm8775: Ignoring new-style parameters in presence of > obsolete ones > wm8775: Setting register ADCFMT (7) to 1, R11.0..1, > old value 02 > wm8775: Setting register ADCMS (8) to 1, R12.8..8, > old value 00 > wm8775: Setting register DCY (24) to 8, R18.4..7, > old value 03 > wm8775: Setting register NGAT (27) to 1, R19.0..0, > old value 00 > wm8775: Setting register LRBOTH (30) to 1, R21.8..8, > old value 00 > wm8775: Setting register AMX (33) to 15, R21.0..3, > old value 01 > wm8775: Updating register 0 (R23), config: 2e01 > active: 2e00. > wm8775: Skipping register 1 (R7), config: 0e00 > active: 0e00. > wm8775: Updating register 2 (R11), config: 1622 > active: 1621. > wm8775: Updating register 3 (R12), config: 1802 > active: 1902. > wm8775: Skipping register 4 (R13), config: 1a00 > active: 1a00. > wm8775: Skipping register 5 (R14), config: 1ccf > active: 1ccf. > wm8775: Skipping register 6 (R15), config: 1ecf > active: 1ecf. > wm8775: Skipping register 7 (R16), config: 207b > active: 207b. > wm8775: Skipping register 8 (R17), config: 2200 > active: 2200. > wm8775: Updating register 9 (R18), config: 2432 > active: 2482. > wm8775: Updating register 10 (R19), config: 2600 > active: 2601. > wm8775: Skipping register 11 (R20), config: 2826 > active: 2826. > wm8775: Updating register 12 (R21), config: 2a01 > active: 2b0f. > ivtv: i2c attach [client=wm8775[0],ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version > 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Create DMA stream 0 using 1024 16384 byte > buffers 16777216 kbytes > total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers > 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte > buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv > i2c driver #0 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: ivtv_enc_thread: pid = 4584, itv = 0xf8d26a20 > ivtv: Unreasonably low latency timer, setting to 64 > (was 32) > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > tveeprom: The eeprom says no radio is present, but > the tuner type > tveeprom: indicates otherwise. I will assume that > radio is present. > tveeprom: Hauppauge: model = 23552, rev = D492, > serial# = 7805262 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, > type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = > 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[1],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of > size 13353 loaded. > cx25840: FW image md5 digest: > aa4d1e3dd17667957d8fe5b8d2d19395 > cx25840: FW image sha1 digest: > 60eafed58e943664aae4754b32271e09a95496b4 > ivtv: i2c attach [client=cx25840[1],ok] > wm8775: Setting register ADCFMT (7) to 1, R11.0..1, > old value 02 > wm8775: Setting register ADCMS (8) to 1, R12.8..8, > old value 00 > wm8775: Setting register DCY (24) to 8, R18.4..7, > old value 03 > wm8775: Setting register NGAT (27) to 1, R19.0..0, > old value 00 > wm8775: Setting register LRBOTH (30) to 1, R21.8..8, > old value 00 > wm8775: Setting register AMX (33) to 15, R21.0..3, > old value 01 > wm8775: Updating register 0 (R23), config: 2e01 > active: 2e00. > wm8775: Skipping register 1 (R7), config: 0e00 > active: 0e00. > wm8775: Updating register 2 (R11), config: 1622 > active: 1621. > wm8775: Updating register 3 (R12), config: 1802 > active: 1902. > wm8775: Skipping register 4 (R13), config: 1a00 > active: 1a00. > wm8775: Skipping register 5 (R14), config: 1ccf > active: 1ccf. > wm8775: Skipping register 6 (R15), config: 1ecf > active: 1ecf. > wm8775: Skipping register 7 (R16), config: 207b > active: 207b. > wm8775: Skipping register 8 (R17), config: 2200 > active: 2200. > wm8775: Updating register 9 (R18), config: 2432 > active: 2482. > wm8775: Updating register 10 (R19), config: 2600 > active: 2601. > wm8775: Skipping register 11 (R20), config: 2826 > active: 2826. > wm8775: Updating register 12 (R21), config: 2a01 > active: 2b0f. > ivtv: i2c attach [client=wm8775[1],ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, > Radio: yes, Model > 0x00914652, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version > 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Create DMA stream 0 using 1024 16384 byte > buffers 16777216 kbytes > total > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create stream 2 using 40 52224 byte buffers > 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 3 using 455 4608 byte > buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv > i2c driver #1 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV > ==================== > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT > Products from real users. > Discover which products truly live up to the hype. > Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
