It may be the firmware version, also is preemtible set in the kernel, may be another problem, the firmware version is very likely a suspect here.
Thanks, Chris On Thu, Mar 24, 2005 at 04:36:04PM -0800, Michael Wester wrote: > > Note that the FM tuner is on the same i2c bus as the first TV tuner, while > > the > > second tuner is all alone on its i2c bus, so thus my theory that forcing > > radio configuration on both tuners is what's tanking the second one for some > > folks (but not sure why its fine for others...). Worth a shot, anywho, and > > this patch is more technically correct, I think... :-) > > Thanks for trying. This makes the ivtv init smoother, no errors with > 0.3.2m, but doesn't help my DMA? issue... > > module ivtv unsupported by SUSE/Novell, tainting kernel. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.2 (m) loading > ivtv: Linux version: 2.6.8-24.10-default 586 REGPARM gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 > ivtv: XXX PCI device: 0x5833 vendor: 0x1002 > module tveeprom unsupported by SUSE/Novell, tainting kernel. > tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7520207 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3440 (type = 11) > ivtv: i2c attach [client=tveeprom[0],ok] > ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model > 0x00ad1598, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > module tuner unsupported by SUSE/Novell, tainting kernel. > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > module saa7115 unsupported by SUSE/Novell, tainting kernel. > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[0],ok] > saa7115: status: (1E) 0x01, (1F) 0xc0 > module saa7127 unsupported by SUSE/Novell, tainting kernel. > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[0],ok] > module msp3400 unsupported by SUSE/Novell, tainting kernel. > msp34xx: ivtv version > msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: Mar 24 2005 15:06:42 > ivtv: i2c attach [client=MSP3448W-A2,ok] > Linux Kernel Card Services > options: [pci] [cardbus] [pm] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create stream 6 using 1024 2048 byte buffers 0 kbytes total > ivtv: Allocate stream 6 using 1024 2048 byte buffers 262144 kbytes total > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create stream 7 > ivtv: Allocate stream 7 > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Create DMA stream 8 using 6 86400 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 8 using 6 86400 byte buffers 518400 kbytes total > ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total > ivtv: Setting Tuner 47 > tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: ivtv_enc_thread: pid = 3597, itv = 0xdd6ff020 > ivtv: ivtv_dec_thread: pid = 3598, itv = 0xdd6ff020 > ieee1394: Initialized config rom entry `ip1394' > saa7115: decoder set norm NTSC > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set NTSC Video Mode > saa7127: Selecting NTSC video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:04:08.0[A] -> GSI 3 (level, low) -> IRQ 3 > ivtv: XXX PCI device: 0x5833 vendor: 0x1002 > tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[1],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: saa7127 client id: saa7127_i2c_id 1, skipped > ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > 0x00914652, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > module cx25840 unsupported by SUSE/Novell, tainting kernel. > cx25840: Ignoring new-style parameters in presence of obsolete ones > spurious 8259A interrupt: IRQ7. > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > ivtv: i2c attach [client=cx25840[0],ok] > module wm8775 unsupported by SUSE/Novell, tainting kernel. > ivtv: i2c attach [client=wm8775[0],ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 > ivtv: ivtv_enc_thread: pid = 3741, itv = 0xdd713314 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:04:09.0[A] -> GSI 7 (level, low) -> IRQ 7 > ivtv: XXX PCI device: 0x5833 vendor: 0x1002 > tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[2],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: saa7127 client id: saa7127_i2c_id 2, skipped > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > ivtv: i2c attach [client=cx25840[1],ok] > ivtv: i2c attach [client=wm8775[1],ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > 0x00914652, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 2 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 34 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 226 > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 26 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 66 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 > ivtv: Switching standard to NTSC. > ivtv: ivtv_enc_thread: pid = 3876, itv = 0xdd727608 > ivtv: Initialized WinTV PVR 150, card #2 > ivtv: ==================== END INIT IVTV ==================== > ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 > Yenta: CardBus bridge found at 0000:02:0c.0 [1524:1411] > Yenta: ISA IRQ mask 0x0000, PCI irq 10 > Socket status: 30000006 > module ivtv_fb unsupported by SUSE/Novell, tainting kernel. > ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) > ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> > ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 7 (level, low) -> IRQ 7 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[7] > MMIO=[fe000000-fe0007ff] Max Packet=[2048] > ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and > has 1704960 bytes. > ivtv-osd: screen coords: [0 0] -> [720 480] > ivtv-osd: original global alpha = 208 > ivtv-osd: current OSD state = 39 > ivtv-osd: new global alpha = 208 (1 255 0) > ivtv-osd: framebuffer at 0xf1510000, mapped to 0xde590000, size 1350k > ivtv-osd: mode is 720x480x32, linelength=2880 > ivtv-osd: fb1: iTVC15 TV out frame buffer device > ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000073b0c9] > cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 > 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 > cs: IO port probe 0x0820-0x08ff: excluding 0x830-0x837 > cs: IO port probe 0x0800-0x080f: clean. > cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x4d0-0x4d7 > cs: IO port probe 0x0100-0x03af: excluding 0x170-0x177 0x260-0x267 > 0x280-0x287 0x370-0x377 > cs: IO port probe 0x0a00-0x0aff: clean. > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c037f760(lo) > IPv6 over IPv4 tunneling driver > IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]> > microcode: No suitable data for CPU0 > IA-32 Microcode Update Driver v1.14 unregistered > ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 3 (level, low) -> IRQ 3 > ACPI: Power Button (FF) [PWRF] > ACPI: Processor [CPU1] (supports C1) > powernow: This module only works with AMD K7 CPUs > module lirc_dev unsupported by SUSE/Novell, tainting kernel. > lirc_dev: IR Remote Control driver registered, at major 61 > module lirc_i2c unsupported by SUSE/Novell, tainting kernel. > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > ivtv: i2c attach [client=Hauppauge IR,ok] > lirc_dev: lirc_register_plugin:sample_rate: 10 > eth0: no IPv6 routers present > Disabled Privacy Extensions on device d8d44c00(sit0) > lp: driver loaded but no devices found > drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic > usbcore: registered new driver usbserial_generic > usbcore: registered new driver usbserial > drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 > Non-volatile memory driver v1.2 > bootsplash: status on console 0 changed to on > spurious 8259A interrupt: IRQ15. > saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 > saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set size > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder disable output > saa7115: decoder enable output > cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0 > ivtv: IRQ: IVTV_IRQ_DEC_DMA_ERR intr 1 > ivtv: IRQ: IVTV_IRQ_DEC_DMA_ERR intr 2 > ivtv: DMA Registers State: xfer: 0x00000000, state: 0x00000003 > dec_addr: 0x00000000 enc_addr: 0x18360000 control: 0x00000003 > ivtv: DMA DEC Buffers: > 0x00000000:0x00000000:0x00000000 > ivtv: DMA ENC Buffers: > 0x0014a6c0:0x17c1c000:0x00004000 > 0x0014e6c0:0x183a0000:0x80004000 > 0x0012fec0:0x183c8000:0x00004000 > 0x00133ec0:0x183cc000:0x00004000 > 0x00137ec0:0x183e0000:0x80004000 > 0xff9ffe7f:0xa39ffff7:0x1807c7fc > 0x7dbfeff6:0xd9fdfbf7:0x1d8fdd7e > 0xc2636e7d:0x1dc9cbde:0xeeefffbe > ivtv: Checking FW at 755166 jiffies > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel -- --- Chris Kennedy / [EMAIL PROTECTED] Engineer KMOS-TV/KTBG-FM Broadcasting Services Department Central Missouri State University ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
