Thank you, HAukur!

Cheers,


-Morten

> If you start the setup for mythtv and go into "general" setup, the third
> screen, "Global Backend Setup" contains a field called "VBI setup".  I had
> it set to "PAL Teletext" but it should be "None" which is the default
> value.
>
> Hope this helps,
> Haukur
>
>
>
>
> Morten R�nseth <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
> 31.03.2005 17:39
> Please respond to ivtv-devel
>
>         To:     [email protected]
>         cc:
>         Subject:        Re: [ivtv-devel] PVR 150MCE encoding/decoding
> problems in mythtv (ivtv 0.3.2p)
>
>
> Could you tell where in Mythtv this is set?
>
>
> Cheers,
>
>
> -Morten
>
> Haukur Hafsteinsson wrote:
>
> I have fixed the problem, I had the VBI interface (Vertical Blanking
> Interval) active.  That caused cpu going up to 90% and blocky picture.
>
> Regards,
> Haukur
>
>
>
> Balaji Ramani <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
> 30.03.2005 14:24
> Please respond to ivtv-devel
>
>         To:        [email protected]
>         cc:
>         Subject:        Re: [ivtv-devel] PVR 150MCE encoding/decoding
> problems in mythtv (ivtv 0.3.2p)
>
>
>
> If the picture is blocky, then it is most likely that your bitrate is too
> low
> Try a setting of around 3000 or 4000 to get proper picture quality.
>
> - Balaji
>
> On Wednesday 30 March 2005 6:18 am, Haukur Hafsteinsson wrote:
>> Hi All,
>>
>> My system:
>> 866 MHz PIII
>> 256Mb ram
>> Mythtv 0.17
>> Kernel 2.6.11.5
>> SuSE 9.2
>>
>> I am currently using the 0.3.2p version of the ivtv driver on my system.
>> After installation with modprobe, I get a perfect video and sound with
>> mplayer, when streaming from /dev/video0. If I then use mythtv, the
>> picture sometimes has small rectangles with wrong color here and there
>> (blocky picture), sound is ok. I know that there is not much cpu power
>> available (about 10% idle), but I have reduced the bitrate in mythtv
> (cpu
>> becomes 30-40% idle), but no result. If I then again use mplayer, it
> shows
>> me the same corrupt picture as mythtv. I have to remove and insert the
>> ivtv module to get it working again with mplayer.
>>
>> Any ideas?
>>
>> Thanks
>> Haukur.
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
>
> --
> -------------------------------------------------------------------
> WEB-fx                           http://www.webfx.no
> Morten Lerskau R�nseth           mailto:[EMAIL PROTECTED]
> Odinsvei 15c                     +47 6680 9191
> 1413 T�rn�sen                    +47 9343 4357
> Norway
> ------------------------------------------------------- This SF.net email
> is sponsored by Demarc: A global provider of Threat Management Solutions.
> Download our HomeAdmin security software for free today!
> http://www.demarc.com/Info/Sentarus/hamr30
> _______________________________________________ ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>




-------------------------------------------------------
This SF.net email is sponsored by Demarc:
A global provider of Threat Management Solutions.
Download our HomeAdmin security software for free today!
http://www.demarc.com/Info/Sentarus/hamr30
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to