Hi, Just adding my 2 cents worth - I have 0.3.3e installed with a PAL PVR150-MCE, type 58 tuner and get good video and tinny sound that is like someone talking down a tube. Prior to 0.3.3e I was using 0.3.2q and the sound was good.
I have had sound since adding the qss=0 option to modprobe.conf - without it I get nothing. Cheers, Rick > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Nick Rosier > Sent: Wednesday, 20 April 2005 7:48 a.m. > To: ivtv-devel@lists.sourceforge.net > Subject: Re: [ivtv-devel] #0.3.3e fixes to pvr150/500 setup > > Chris, > > this driver seems to give me the best video-capture on my > 150MCE (PAL) I've seen so far. Before I was using DNR to get > some of the "blockiness" away but this one is really on the > right track but now I just disabled it. > I haven't been able to use my 150 since 0.3.2r until the > saa7127-patch so I can't help you with the proc-amp problem. > I might be able to find some time later this week to apply > the saa7127 patch to the older releases and do some testing. > I do have one problem on the 0.3.3 series that I didn't have > on 0.3.2p. The problem is that on most channels, audio is > "bad". On some it's just some ticking noises from time to > time, on others it's really bad with the occassional > "humming" (sorry if I can't describe it better, not a native > english speaker). > > N. > > On 4/19/05, Chris Kennedy <[EMAIL PROTECTED]> wrote: > > I became aware of a problem in the cx25840 digitizer which > we had hit > > since changing the code from Ulfs original setup, where we > would reset > > the registers upon starting a capture. It seems if we > don't do this > > just right, then the chip doesn't setup itself to a good state for > > things like the proc-amp and possibly other settings. I > had to figure > > out the best way to keep from losing other settings we manually set > > but still give it this reset. So this attempts that, seems like it > > should work, please test this if you've had problems with > pvr150/500 > > cards since the version 0.3.2u or so, and also if you are currently > > doing fine with these cards, so we can make sure this is a good > > overall global solution for everyone (and really the right thing to > > do). Video proc-amp settings would be dark and red without these > > changes, and this could also be why some don't have sound > anymore and various other things (like no capture). > > > > #0.3.3e: http://www.ivtv.tv/releases/ivtv-0.3/ > > > > Thanks, > > Chris > > -- > > --- > > Chris Kennedy / [EMAIL PROTECTED] > > Engineer KMOS-TV/KTBG-FM > > Broadcasting Services Department > > Central Missouri State University > > > ------------------------------------------------------- > This SF.Net email is sponsored by: New Crystal Reports XI. > Version 11 adds new functionality designed to reduce time > involved in creating, integrating, and deploying reporting > solutions. Free runtime info, new features, or free trial, > at: http://www.businessobjects.com/devxi/728 > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728 _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
