> Anthony Mittaz wrote: > >>Hello, I recently bought an Hauppauge WinTV PVR 150(not mce) on ebay >> and I couldnt' get it work on my mythtvbackend. I'm also using a wintv >> pvr 250 who is working like a charm... >> >>Here is my init dmesg >> > <snip> > >> PVR 150!!! >> >>ivtv: Autodetected WinTV PVR 150 card >>ivtv: Found an iTVC16 based chip >>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 12 >>PCI: setting IRQ 12 as level-triggered >>ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 12 (level, low) -> IRQ 12 >> ivtv: Unreasonably low latency timer, setting to 64 (was 32) >>ivtv: XXX PCI device: 0x01e0 vendor: 0x10de >>ivtv: i2c attach [client=tveeprom,ok] >>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 >>ivtv: i2c attach [client=(tuner unset),ok] >>saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) >>msp3400: error while reading chip version >>dont like that >> >> > It's fine, the 150's don't have an msp34XX chip on them > >>tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7768178 >> tveeprom: tuner = <unknown> (idx = 97, type = 0) >>dont like that >> >> > Yes, that's bad. It means you need a newer tveeprom module, and probably > a newer tuner module. Try using the ones from ivtv. There has been a lot > of work put into bringing these up to speed lately. > >>tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) >> tveeprom: audio_processor = MSP3400C (type = 4) >>ivtv: Tuner Type 0, Tuner formats 0x00000e07, Radio: yes, Model >>0x008d1657, Revision 0xe09c25eb >>ivtv: Radio detected >>ivtv: ivtv_enc_thread: pid = 1972, itv = 0xe09a3120 >>cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) >>cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) >>cx25840: detecting client on address 0x88 >>cx25840: writing init values >>cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. >> cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa >>cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 >> cx25840: Status: cx258423 (DEVICE_ID) >>ivtv: i2c attach [client=cx25840[50],ok] >>ivtv: i2c attach [client=wm8775[50],ok] >>ivtv: Encoder revision: 0x02040011 >>ivtv: Configuring WinTV PVR 150 card with 5 streams >>ivtv: Registered v4l2 device, streamtype 0 minor 1 >>ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total >> ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 >> kbytes total >>ivtv: Registered v4l2 device, streamtype 1 minor 33 >>ivtv: Create DMA stream 1 >>ivtv: Allocate DMA stream 1 >>ivtv: Registered v4l2 device, streamtype 2 minor 225 >>ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total >> ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 >> kbytes total >>ivtv: Registered v4l2 device, streamtype 3 minor 25 >>ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total >> ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes >> total ivtv: Registered v4l2 device, streamtype 4 minor 65 >>ivtv: Create stream 4 >>ivtv: Allocate stream 4 >>ivtv: Setting Tuner 50 >>tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #1 >>cx25840: decoder set input (6) >>cx25840: Tuner Input >>cx25840: set audio: 0x01 >>ivtv: Switching standard to PAL. >>ivtv: i2c client addr: 0x43 not found! >>cx25840: decoder set norm PAL >>cx25840: set audio: 0x01 >>ivtv: Initialized WinTV PVR 150, card #1 >>ivtv: ==================== END INIT IVTV ==================== >> >> >> >>modprobe.conf >># ivtv modules videodev >>alias char-major-81 videodev >>alias char-major-81-0 ivtv >>alias char-major-81-1 ivtv >>#alias tveeprom tveeprom-ivtv >>#alias msp3400 msp3400-ivtv >># Pal user >>options cx25840 no_black_magic=1 >>options ivtv ivtv_std=2 tuner=5,50 tda9887=0,0 >>#options ivtv ivtv_std=2 tda9887=0 >>#lircd >>install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-istall >> lirc_i2c >> >> > You may also want to trim this down to just the alias lines. The latest > versions should do a fairly good job of auto detecting everything. >
Thank you now this is my new init dmesg ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (p) loading ivtv: Linux version: 2.6.11-1.14_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2766571 tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model 0x00891518, Revision 0x00000000 ivtv: PAL tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Apr 30 2005 10:58:38 ivtv: i2c attach [client=MSP3418W-A2,ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 80 52224 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 80 52224 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 29 tuner: type set to 29 (LG PAL_BG (TPI8PSB11D)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 1953, itv = 0xe09a3120 saa7115: decoder set norm PAL saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 PVR 150 !!! ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 12 (level, low) -> IRQ 12 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7768178 tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0x00000000 ivtv: PAL tuner detected ivtv: Radio detected cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258423 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 55 tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #1 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to PAL. cx25840: decoder set norm PAL cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== and still all i can see is static ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
