I have a PVR-250 that has been running in my KT266A Duron 1GHz quite well. I now have it working under 0.3.3x.
I also have a 500mce that I have gotten running is my desktop PC, KT400 with XP 2000+. I moved the 500mce into the KT266A box, but it doesn't work there. The PVR-250 still works fine, but when I try to read from the 500mce I sometimes get a couple of seconds, then the machine spontaneously reboots:( This happens in both mythtv, and also just mplayer /dev/videoX. Here is the loading script I run, and the output in dmesg (before trying to read from cards). As the machine reboots, I don't get a chance to see any kernel messages that might be displayed at the crash. #!/bin/bash PATH=$PATH:/usr/local/bin #Load modules # add standard=0x.. to this line once we figure out which one is NZ modprobe msp3400 standard=0x08 modprobe saa7115 modprobe tveeprom modprobe ivtv modprobe tuner modprobe wm8775 mixer=1 modprobe cx25840 i2c_enable=1,1 audiofmt=0x04 #Things to set: #PAL #test_ioctl -u 0xff #Tuner #test_ioctl -p 4 ivtvctl -p 4 #Res #test_ioctl -f width=720,height=576 ivtvctl -f width=720,height=576 ivtvctl -d /dev/video1 -f width=720,height=576 ivtvctl -d /dev/video2 -f width=720,height=576 #Mute off #test_ioctl -y mute=0 ivtvctl -y mute=0 #compression #test_ioctl -c bitrate=4500000,bitrate_peak=6000000 ivtvctl -c bitrate=4500000,bitrate_peak=6000000 #nvidia tv daemon nvtvd -N & /etc/init.d/lirc stop sleep 2 /etc/init.d/lirc start ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (x) loading ivtv: Linux version: 2.6.11 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3099 vendor: 0x1106 msp34xx: ivtv version msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: May 1 2005 11:33:54 ivtv: i2c attach [client=MSP3415G-B8,ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x00, (1F) 0xc0 tveeprom: Hauppauge: model = 48014, rev = G748, serial# = 6288948 tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = MSP3415 (type = 6) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model 0x009d7518, Revision 0x00000004 ivtv: PAL tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 160 52224 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 160 52224 byte buffers 8388608 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 29 tuner: type set to 29 (LG PAL_BG (TPI8PSB11D)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: ivtv_enc_thread: pid = 2537, itv = 0xd0aa8c20 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. saa7115: decoder set norm PAL saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3099 vendor: 0x1106 saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7742974 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000 ivtv: PAL tuner detected ivtv: SECAM tuner detected ivtv: Radio detected cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 242 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 242 34632 byte buffers 8388608 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 56 tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to PAL. cx25840: decoder set norm PAL cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3099 vendor: 0x1106 saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) ivtv: ivtv_enc_thread: pid = 2637, itv = 0xd0abcb14 tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7742974 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000 ivtv: PAL tuner detected ivtv: SECAM tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create DMA stream 2 using 242 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 242 34632 byte buffers 8388608 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 66 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 56 tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #2 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to PAL. cx25840: decoder set norm PAL cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== ivtv: ivtv_enc_thread: pid = 2697, itv = 0xd0ad0a08 saa7115: decoder set size cx25840: decoder set size 720x576 (from 720x576) -> scale 0x65536, filter 0 cx25840: decoder set size 720x576 (from 720x576) -> scale 0x65536, filter 0 ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
