System hung again today; this time with 0.3.4o. Same error messages; anyone got a clue?
N. May 13 19:53:09 [kernel] ivtv: ENC: REG_DMAXFER 2 wait failed May 13 19:53:09 [kernel] ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 2342. May 13 19:53:09 [kernel] ivtv: Check digitizer Sync May 13 19:53:09 [kernel] saa7115: status: 0x91 May 13 19:53:09 [kernel] ivtv: Trying to restart capture. May 13 19:53:11 [kernel] ivtv: ENC: DMA still Pending while stoping capture! May 13 19:53:13 [kernel] saa7115: decoder disable output May 13 19:53:13 [kernel] saa7115: decoder enable output May 13 19:53:14 [kernel] ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0. May 13 19:53:14 [kernel] ivtv: Check digitizer Sync May 13 19:53:14 [kernel] saa7115: status: 0x91 May 13 19:53:14 [kernel] ivtv: Trying to restart capture. May 13 19:53:16 [kernel] ivtv: ENC: DMA still Pending while stoping capture! May 13 19:53:17 [kernel] saa7115: decoder disable output May 13 19:53:17 [kernel] saa7115: decoder enable output May 13 19:53:18 [kernel] ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0. May 13 19:53:18 [kernel] ivtv: Check digitizer Sync May 13 19:53:18 [kernel] saa7115: status: 0x91 May 13 19:53:18 [kernel] ivtv: Trying to restart capture. May 13 19:53:20 [kernel] ivtv: ENC: DMA still Pending while stoping capture! May 13 19:53:22 [kernel] saa7115: decoder disable output May 13 19:53:22 [kernel] saa7115: decoder enable output May 13 19:53:23 [kernel] ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0. On 5/9/05, Nick Rosier <[EMAIL PROTECTED]> wrote: > System hung when I got back home tonight; I had to reset it. Around > 9pm (end of a recording), the system started giving ivtv errors which > continued until I resetted the system. Seen as the amount of work that > has been done on DMA in the recent driver-version it could be a bug. > I'm 1 revision behind so I'm going to go to 0.3.4f tonight. > Below the driver initialisation and the beginning of the error-storm. > > N. > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.4 (e) loading > ivtv: Linux version: 2.6.11-gentoo-r6 preempt K8 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597218 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: i2c attach [client=tveeprom[50],ok] > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model > 0x00ad2557, Revision 0x00000001 > ivtv: Radio detected > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x00, (1F) 0xc0 > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > msp34xx: ivtv version > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: May 8 2005 19:05:51 > ivtv: i2c attach [client=MSP3418W-B3,ok] > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total > ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total > ivtv: Setting Tuner 38 > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > i2c driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > ivtv: ivtv_enc_thread: pid = 6123, itv = 0xe0997560 > ivtv: ivtv_dec_thread: pid = 6124, itv = 0xe0997560 > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set PAL Video Mode > saa7127: Selecting PAL video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7627086 > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: saa7127 client id: saa7127_i2c_id 1, skipped > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > 0x008d2590, Revision 0x00000001 > ivtv: Radio detected > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx258433 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Setting Tuner 58 > tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #1 > cx25840: decoder set input (6) > cx25840: Tuner Input > cx25840: set audio: 0x01 > ivtv: Switching standard to PAL. > cx25840: decoder set norm PAL > cx25840: set audio: 0x01 > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV ==================== > > May 8 21:01:49 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 18174. > May 8 21:01:49 [kernel] ivtv: Check digitizer Sync > May 8 21:01:49 [kernel] saa7115: status: 0x91 > May 8 21:01:49 [kernel] ivtv: Trying to restart capture. > May 8 21:01:49 [kernel] ivtv: ENC: REG_DMAXFER 2 wait failed > May 8 21:01:51 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:01:52 [kernel] saa7115: decoder disable output > May 8 21:01:52 [kernel] saa7115: decoder enable output > May 8 21:01:53 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:01:53 [kernel] ivtv: Check digitizer Sync > May 8 21:01:53 [kernel] saa7115: status: 0x91 > May 8 21:01:53 [kernel] ivtv: Trying to restart capture. > May 8 21:01:55 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:01:57 [kernel] saa7115: decoder disable output > May 8 21:01:57 [kernel] saa7115: decoder enable output > May 8 21:01:58 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:01:58 [kernel] ivtv: Check digitizer Sync > May 8 21:01:58 [kernel] saa7115: status: 0x91 > May 8 21:01:58 [kernel] ivtv: Trying to restart capture. > May 8 21:02:00 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:02:02 [kernel] saa7115: decoder disable output > May 8 21:02:02 [kernel] saa7115: decoder enable output > May 8 21:02:03 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:02:03 [kernel] ivtv: Check digitizer Sync > May 8 21:02:03 [kernel] saa7115: status: 0x91 > May 8 21:02:03 [kernel] ivtv: Trying to restart capture. > May 8 21:02:05 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:02:06 [kernel] saa7115: decoder disable output > May 8 21:02:06 [kernel] saa7115: decoder enable output > May 8 21:02:07 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:02:07 [kernel] ivtv: Check digitizer Sync > May 8 21:02:07 [kernel] saa7115: status: 0x91 > May 8 21:02:07 [kernel] ivtv: Trying to restart capture. > May 8 21:02:10 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:02:11 [kernel] saa7115: decoder disable output > May 8 21:02:11 [kernel] saa7115: decoder enable output > May 8 21:02:12 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:02:12 [kernel] ivtv: Check digitizer Sync > May 8 21:02:12 [kernel] saa7115: status: 0x91 > May 8 21:02:12 [kernel] ivtv: Trying to restart capture. > May 8 21:02:14 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:02:16 [kernel] saa7115: decoder disable output > May 8 21:02:16 [kernel] saa7115: decoder enable output > May 8 21:02:17 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:02:17 [kernel] ivtv: Check digitizer Sync > May 8 21:02:17 [kernel] saa7115: status: 0x91 > May 8 21:02:17 [kernel] ivtv: Trying to restart capture. > May 8 21:02:19 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 21:02:20 [kernel] saa7115: decoder disable output > May 8 21:02:20 [kernel] saa7115: decoder enable output > May 8 21:02:22 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 21:02:22 [kernel] ivtv: Check digitizer Sync > May 8 21:02:22 [kernel] saa7115: status: 0x91 > ..... > May 8 23:57:54 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:57:55 [kernel] saa7115: decoder disable output > May 8 23:57:55 [kernel] saa7115: decoder enable output > May 8 23:57:56 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:57:56 [kernel] ivtv: Check digitizer Sync > May 8 23:57:56 [kernel] saa7115: status: 0x91 > May 8 23:57:56 [kernel] ivtv: Trying to restart capture. > May 8 23:57:58 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:58:00 [kernel] saa7115: decoder disable output > May 8 23:58:00 [kernel] saa7115: decoder enable output > May 8 23:58:01 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:58:01 [kernel] ivtv: Check digitizer Sync > May 8 23:58:01 [kernel] saa7115: status: 0x91 > May 8 23:58:01 [kernel] ivtv: Trying to restart capture. > May 8 23:58:03 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:58:04 [kernel] saa7115: decoder disable output > May 8 23:58:04 [kernel] saa7115: decoder enable output > May 8 23:58:05 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:58:05 [kernel] ivtv: Check digitizer Sync > May 8 23:58:05 [kernel] saa7115: status: 0x91 > May 8 23:58:05 [kernel] ivtv: Trying to restart capture. > May 8 23:58:08 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:58:09 [kernel] saa7115: decoder disable output > May 8 23:58:09 [kernel] saa7115: decoder enable output > May 8 23:58:10 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:58:10 [kernel] ivtv: Check digitizer Sync > May 8 23:58:10 [kernel] saa7115: status: 0x91 > May 8 23:58:10 [kernel] ivtv: Trying to restart capture. > May 8 23:58:12 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:58:14 [kernel] saa7115: decoder disable output > May 8 23:58:14 [kernel] saa7115: decoder enable output > May 8 23:58:15 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:58:15 [kernel] ivtv: Check digitizer Sync > May 8 23:58:15 [kernel] saa7115: status: 0x91 > May 8 23:58:15 [kernel] ivtv: Trying to restart capture. > May 8 23:58:17 [kernel] ivtv: ENC: DMA still Pending while stoping capture! > May 8 23:58:18 [kernel] saa7115: decoder disable output > May 8 23:58:18 [kernel] saa7115: decoder enable output > May 8 23:58:19 [kernel] ivtv: Timeout waiting for data! Encoder > buffers have 0x00000000 bytes trans_id = 0. > May 8 23:58:19 [kernel] ivtv: Check digitizer Sync > May 8 23:58:19 [kernel] saa7115: status: 0x91 > May 8 23:58:19 [kernel] ivtv: Trying to restart capture. > > ==== RESET ===== > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
