I have a pvr500 and i live in PAL country (Italy)
I cannot get audio to work with tuner.
I tried ivtv drivers from 0.3.2 to 0.3.4p, but nothing changes.
I test it within e outhere mythtv, but i got same results.
Video is good, but no audio.
I tried to use composite-in and, strange thing, if i switch to input "-p 3" (by ivtvctl), video and audio works good! (only for composite)
When i switch to tuner (-p 6), i get every channel (ptune.pl or mythtv) with no audio.
Do I have to force to change the tuner by "modprobe ivtv tuner=XX", or the autoprobe is right choise? (i suppose i have not audio for this...)
I tried to pass audiofmt=1 (and 2) to cx25840, but it's the same thing...
Here is my ivtv related log:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (p) loading
ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: XXX PCI device: 0x0735 vendor: 0x1039
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
tveeprom: Hauppauge: model = 23559, rev = D291, serial# = 7726615
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00912651, Revision 0x00000000
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Setting Tuner 56
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0
ivtv: ivtv_enc_thread: pid = 1159, itv = 0xd0d8dda0
ivtv: ivtv_enc_vbi_thread: pid = 1160, itv = 0xd0d8dda0
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18
ivtv: XXX PCI device: 0x0735 vendor: 0x1039
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
tveeprom: Hauppauge: model = 23559, rev = D291, serial# = 7726615
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00912651, Revision 0x00000000
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 56
ivtv: ivtv_enc_thread: pid = 1226, itv = 0xd0db1074
ivtv: ivtv_enc_vbi_thread: pid = 1227, itv = 0xd0db1074
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
