Mine experience is that livetv is working, but the controls are extremly slow. Also OSD and EPG are not showing on the screen. YUV is working fine, i can switch between livetv and video.
I've attached a piece of my messages.log. No strange errors noticed. Using 0.3.5f and iivtvdev 1.0 (i believe, no version attached) Maybe it is possible to let show a version number in the log file like ivtv. Gr. Patrick > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Namens John Harvey > Verzonden: dinsdag 24 mei 2005 12:53 > Aan: [email protected] > Onderwerp: Re: [ivtv-devel] .3.5f report. YUV working well, > getting crashes though. > > With Myth it's getting the vbi insertion stuff enabled which > is asking for more memory which is failing. With just dd'ing > i doubt it is doing that. > As for the 2nd crash i have no idea but i may look later tonight. > > Can you send me a complete log from ivtv_init to the first > crash and i'll take a look through the buffer allocation. > Since i don't actually need any buffers in the Xv case for > YUV output i will probably try to stop it allocating it for that case. > > John > --- Lucas Meijer <[EMAIL PROTECTED]> wrote: > > Heya. > > > > With 3.5f I can switch between mpeg decoding, yuv decoding > as much as > > I like. Whenever I throw in myth's livetv however, things go bad. > > Either I crash when starting up livetv, or the next > recording I watch > > after having been in livetv. I've tried a lot of times, and > have seen > > two different looking types of problems in dmesg. > > Both of them pasted > > below: > > > > ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 > > kbytes total > > ivtv: Allocate DMA stream 2 using 41 50540 byte buffers 2097152 > > kbytes total > > ivtv: Setup VBI API header 0x0000bd06 pkts 1 buffs > > 48 ln 34 sz 64 > > ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x000000f1 > > saa7115: decoder disable output > > saa7115: decoder enable output > > ivtv: VBI insertion started > > ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 > > .....................................
May 24 18:44:21 localhost kernel: ivtv: ==================== START INIT IVTV ==================== May 24 18:44:21 localhost kernel: ivtv: version 0.3.5 (f) loading May 24 18:44:21 localhost kernel: ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 May 24 18:44:21 localhost kernel: ivtv: In case of problems please include the debug info May 24 18:44:21 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when May 24 18:44:21 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. May 24 18:44:21 localhost kernel: ivtv: Autodetected WinTV PVR 350 card May 24 18:44:21 localhost kernel: ivtv: Found an iTVC15 based chip May 24 18:44:23 localhost kernel: PCI: Found IRQ 10 for device 0000:02:0a.0 May 24 18:44:23 localhost kernel: ivtv: XXX PCI device: 0x1130 vendor: 0x8086 May 24 18:44:23 localhost kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596027 May 24 18:44:24 localhost kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) May 24 18:44:25 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) May 24 18:44:25 localhost kernel: tveeprom: audio_processor = CS5331 (type = 9) May 24 18:44:25 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] May 24 18:44:25 localhost kernel: ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 May 24 18:44:25 localhost kernel: ivtv: Radio detected May 24 18:44:25 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones May 24 18:44:25 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 May 24 18:44:25 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] May 24 18:44:26 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) May 24 18:44:26 localhost kernel: saa7115: detecting saa7115 client on address 0x42 May 24 18:44:26 localhost kernel: saa7115: writing init values May 24 18:44:27 localhost kernel: ivtv: i2c attach [client=saa7115[50],ok] May 24 18:44:27 localhost kernel: saa7115: status: (1E) 0x00, (1F) 0xc0 May 24 18:44:27 localhost kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones May 24 18:44:27 localhost kernel: saa7127: video encoder driver version V 0.3 loaded May 24 18:44:27 localhost kernel: saa7127: detecting saa7127 client on address 0x88 May 24 18:44:27 localhost kernel: saa7127: Selecting NTSC video Standard May 24 18:44:27 localhost kernel: saa7127: Selecting S-Video+Composite May 24 18:44:27 localhost kernel: saa7127: Turn WSS off May 24 18:44:27 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format May 24 18:44:27 localhost lircd-0.7.1[2795]: lircd(any) ready May 24 18:44:27 localhost lircd: lircd start op succeeded May 24 18:44:28 localhost kernel: saa7127: Selecting Normal Encoder Input May 24 18:44:29 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:44:30 localhost kernel: saa7127: Enable Video Output May 24 18:44:30 localhost kernel: ivtv: i2c attach [client=saa7127[50],ok] May 24 18:44:30 localhost kernel: msp34xx: ivtv version May 24 18:44:30 localhost kernel: msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode May 24 18:44:30 localhost kernel: msp34xx: $Id$ compiled on: May 24 2005 18:38:25 May 24 18:44:30 localhost kernel: ivtv: i2c attach [client=MSP3418W-B3,ok] May 24 18:44:30 localhost kernel: tda9885/6/7: chip found @ 0x86 May 24 18:44:30 localhost kernel: ivtv: i2c attach [client=tda9887,ok] May 24 18:44:30 localhost kernel: ivtv: Encoder revision: 0x02040011 May 24 18:44:30 localhost kernel: ivtv: Decoder revision: 0x02020023 May 24 18:44:30 localhost kernel: ivtv: Configuring WinTV PVR 350 card with 10 streams May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 2 using 41 50540 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 May 24 18:44:30 localhost kernel: ivtv: Create stream 4 May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232 May 24 18:44:30 localhost kernel: ivtv: Create stream 7 May 24 18:44:30 localhost kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48 May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 8 using 80 25920 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total May 24 18:44:30 localhost kernel: ivtv: Setting Tuner 38 May 24 18:44:30 localhost kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 May 24 18:44:30 localhost kernel: saa7115: decoder set norm PAL May 24 18:44:30 localhost kernel: saa7115: set audio: 0x01 May 24 18:44:30 localhost kernel: saa7115: decoder set input (4) May 24 18:44:30 localhost kernel: saa7115: now setting Composite input May 24 18:44:30 localhost kernel: ivtv: Setting audio matrix to input 3, output 1 May 24 18:44:30 localhost kernel: ivtv: Switching standard to PAL. May 24 18:44:30 localhost kernel: ivtv: ivtv_enc_thread: pid = 2566, itv = 0xe0dff6a0 May 24 18:44:30 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 2567, itv = 0xe0dff6a0 May 24 18:44:30 localhost kernel: ivtv: ivtv_dec_thread: pid = 2568, itv = 0xe0dff6a0 May 24 18:44:30 localhost kernel: ivtv: ivtv_dec_vbi_thread: pid = 2569, itv = 0xe0dff6a0 May 24 18:44:30 localhost kernel: saa7115: decoder set norm PAL May 24 18:44:30 localhost kernel: saa7115: set audio: 0x01 May 24 18:44:30 localhost kernel: saa7127: Setting Encoder Video Standard May 24 18:44:30 localhost kernel: saa7127: Set PAL Video Mode May 24 18:44:30 localhost kernel: saa7127: Selecting PAL video Standard May 24 18:44:30 localhost kernel: ivtv: Initialized WinTV PVR 350, card #0 May 24 18:44:30 localhost kernel: ivtv: ==================== END INIT IVTV ==================== May 24 18:44:30 localhost kernel: ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) May 24 18:44:30 localhost kernel: ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. May 24 18:44:30 localhost kernel: ivtv-osd: screen coords: [0 0] -> [720 576] May 24 18:44:30 localhost kernel: ivtv-osd: original global alpha = 208 May 24 18:44:31 localhost kernel: ivtv-osd: current OSD state = 39 May 24 18:44:31 localhost kernel: ivtv-osd: new global alpha = 208 (1 255 0) May 24 18:44:31 localhost kernel: ivtv-osd: framebuffer at 0x45510000, mapped to 0xe1d10000, size 1620k May 24 18:44:31 localhost kernel: ivtv-osd: mode is 720x576x32, linelength=2880 May 24 18:44:31 localhost kernel: Console: switching to colour frame buffer device 90x36 May 24 18:44:31 localhost kernel: ivtv-osd: fb0: iTVC15 TV out frame buffer device May 24 18:44:31 localhost kernel: ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total May 24 18:44:31 localhost kernel: lirc_dev: no version for "struct_module" found: kernel tainted. May 24 18:44:31 localhost kernel: lirc_dev: IR Remote Control driver registered, at major 61 May 24 18:44:31 localhost kernel: bttv: driver version 0.9.15 loaded May 24 18:44:31 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture May 24 18:44:31 localhost kernel: cx2388x v4l2 driver version 0.0.4 loaded May 24 18:44:31 localhost kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) May 24 18:44:31 localhost kernel: ivtv: i2c attach [client=Hauppauge IR,ok] May 24 18:44:31 localhost kernel: lirc_dev: lirc_register_plugin: sample_rate: 10 May 24 18:44:32 localhost kernel: ivtv: Tried to open YUV output device but need to send data to mpeg decoder before it can be used May 24 18:44:34 localhost gdm-autologin(pam_unix)[3011]: session opened for user mythtv by (uid=0) May 24 18:44:44 localhost kernel: PCI: Found IRQ 5 for device 0000:02:08.0 May 24 18:44:44 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.0 May 24 18:44:48 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:44:53 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:45:03 localhost gconfd (mythtv-3396): (versie 2.6.0) gestart, pid 3396 gebruiker 'mythtv' May 24 18:45:04 localhost gconfd (mythtv-3396): Adres gevonden "xml:readonly:/etc/gconf/gconf.xml.mandatory" naar een alleen-lezen configuratiebron op positie 0 May 24 18:45:04 localhost gconfd (mythtv-3396): Adres gevonden "xml:readwrite:/home/mythtv/.gconf" naar een schrijfbare configuratiebron op positie 1 May 24 18:45:04 localhost gconfd (mythtv-3396): Adres gevonden "xml:readonly:/etc/gconf/gconf.xml.defaults" naar een alleen-lezen configuratiebron op positie 2 May 24 18:45:38 localhost kernel: saa7115: decoder set size May 24 18:45:38 localhost kernel: ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total May 24 18:45:38 localhost kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 May 24 18:45:38 localhost kernel: ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x000000f1 May 24 18:45:39 localhost kernel: saa7115: decoder disable output May 24 18:45:39 localhost kernel: saa7115: decoder enable output May 24 18:45:43 localhost kernel: ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total May 24 18:45:43 localhost kernel: ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total May 24 18:45:44 localhost kernel: ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 May 24 18:46:06 localhost kernel: saa7115: decoder set size May 24 18:46:06 localhost kernel: ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total May 24 18:46:06 localhost kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 May 24 18:46:06 localhost kernel: ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x000000f1 May 24 18:46:07 localhost kernel: saa7115: decoder disable output May 24 18:46:07 localhost kernel: saa7115: decoder enable output May 24 18:46:10 localhost kernel: ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total May 24 18:46:10 localhost kernel: ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total May 24 18:46:11 localhost kernel: ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 May 24 18:46:39 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:46:40 localhost kernel: ivtv: Allocate DMA stream 8 using 80 25920 byte buffers 2097152 kbytes total May 24 18:46:40 localhost kernel: ivtv: pci_map_sg dma->page_count 154 dma->SG_length 154 May 24 18:46:43 localhost last message repeated 84 times May 24 18:46:43 localhost lircd-0.7.1[2795]: removed client May 24 18:46:46 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:46:46 localhost kernel: ivtv: Allocate DMA stream 8 using 80 25920 byte buffers 2097152 kbytes total May 24 18:46:46 localhost kernel: ivtv: pci_map_sg dma->page_count 154 dma->SG_length 154 May 24 18:46:48 localhost last message repeated 54 times May 24 18:46:48 localhost lircd-0.7.1[2795]: removed client May 24 18:46:51 localhost kernel: saa7115: decoder set size May 24 18:46:51 localhost kernel: ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total May 24 18:46:51 localhost kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 May 24 18:46:51 localhost kernel: ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x000000f1 May 24 18:46:52 localhost kernel: saa7115: decoder disable output May 24 18:46:52 localhost kernel: saa7115: decoder enable output May 24 18:46:54 localhost kernel: ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total May 24 18:46:54 localhost kernel: ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total May 24 18:46:55 localhost kernel: ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 May 24 18:47:22 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:47:22 localhost kernel: ivtv: Allocate DMA stream 8 using 80 25920 byte buffers 2097152 kbytes total May 24 18:47:22 localhost kernel: ivtv: pci_map_sg dma->page_count 154 dma->SG_length 154 May 24 18:47:31 localhost last message repeated 228 times May 24 18:47:31 localhost lircd-0.7.1[2795]: removed client May 24 18:47:35 localhost kernel: saa7115: decoder set size May 24 18:47:35 localhost kernel: ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total May 24 18:47:35 localhost kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 May 24 18:47:35 localhost kernel: ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x000000f1 May 24 18:47:35 localhost kernel: saa7115: decoder disable output May 24 18:47:35 localhost kernel: saa7115: decoder enable output May 24 18:47:38 localhost kernel: ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total May 24 18:47:38 localhost kernel: ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total May 24 18:47:39 localhost kernel: ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 May 24 18:49:40 localhost lircd-0.7.1[2795]: accepted new client on /dev/lircd May 24 18:49:41 localhost kernel: ivtv: Allocate DMA stream 8 using 80 25920 byte buffers 2097152 kbytes total May 24 18:49:41 localhost kernel: ivtv: pci_map_sg dma->page_count 154 dma->SG_length 154 May 24 18:50:12 localhost last message repeated 800 times May 24 18:50:23 localhost last message repeated 280 times May 24 18:50:23 localhost lircd-0.7.1[2795]: removed client May 24 18:50:54 localhost sshd(pam_unix)[3482]: session opened for user root by (uid=0)
