After having searched through the ivtv list archives, I feel like the
solutions I'm reading stop one step short of me understanding what to
do. I have a working WinTV FM card now and I'm trying to add a
PVR150. Since I'm running 2.6.8.1-10mdk, is it currently not possible
for me to get both cards fully working without a kernel upgrade? When
I install the ivtv drivers, the sound kicks out on my bttv card now,
however I can't get the 150 to work at all. Nothing seems to be
wrong, so much as it just doesn't work. I get blackness interlaced
with occasional static when set to the tuner.
Dmesg of the modprobe followed by an attempt to record a channel
(ivtvctl -d /dev/video1 -p6 && ivtvctl -d /dev/video1 -u 0x0300 &&
ptune.pl --input /dev/video1 --channel 3 && cat /dev/video1 >
test.mpg):
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (h) loading
ivtv: Linux version: 2.6.8.1-10mdk K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
msp3400: error while reading chip version
tveeprom: Ignoring new-style parameters in presence of obsolete ones
tveeprom: Hauppauge: model = 60171, rev = C1V , serial# = 1071772
tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3430 (type = 7)
tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7827197
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00892598, Revision 0x00000001
ivtv: Radio detected
cx25840: Unknown parameter `i2c_enable'
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: starting probe for adapter bt848 #0 [sw] (0x10005)
cx25840: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0)
cx25840: starting probe for adapter ISA main adapter (0x0)
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
cx25840: Failed to load any FW image file
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
wm8775: Ignoring new-style parameters in presence of obsolete ones
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: ivtv_enc_thread: pid = 3672, itv = 0xda1efc60
ivtv: ivtv_enc_vbi_thread: pid = 3673, itv = 0xda1efc60
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: Tuner Input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
cx25840: decoder set size 640x480 (from 720x480) -> scale
131072x65536, filter 0
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1444
ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: ENC: Sleep timeout interrupted.
ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1444
ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: ENC: Sleep timeout interrupted.
modprobe.conf:
alias autofs autofs4
alias char-major-116-* snd
alias sound-slot-0 snd-via82xx
options tuner 2,47
alias char-major-81-* bttv
options bttv radio=1 bttv_verbose=1 tuner=2 card=2 gbuffers=8
alias char-major-61-* lirc_serial
alias char-major-14-* soundcore
alias sound-slot-0 snd-via82xx
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias eth0 via-rhine
install bttv { modprobe -k tuner; modprobe -k msp3400; } ;
/sbin/modprobe --first-time --ignore-install bttv
install snd-via82xx /sbin/modprobe --first-time --ignore-install
snd-via82xx && { /sbin/modprobe snd-pcm-oss; /bin/true; }
install usb-interface /sbin/modprobe usb-uhci; /sbin/modprobe
ehci-hcd; /bin/true
remove snd-via82xx { /sbin/modprobe -r snd-pcm-oss; } ; /sbin/modprobe
-r --first-time --ignore-remove snd-via82xx
alias char-major-81 videodev
alias char-major-81-1 ivtv
options ivtv tuner=47 debug=1
options saa7127 i2c_enable=-1
options cx25840 i2c_enable=1 no_black_magic=1
I moved the msp3400.ko from ivtv to msp3400-ivtv.ko and moved the
kernel tuner.ko to tuner.ko.bak. I don't know where to go from here.
ivtvctl -d /dev/video1 -I
gives:
check SAA7115 input signal
ioctl: VIDEO_STATUS = Bad
SAA7115 reg[STATUS#1 - 0x1E] = 08
Color Standard (D0-D1): BW/No color
White peak loop (D2): Not activated
Gain value for act.lum. (min) (D3): Limited
Gain value for act.lum. (max) (D4): Not limited
WIPA-mode slow-time constant (D5): Not activated
Horizontal frequency (D6): Locked
Field length (D7): Non-standard
SAA7115 reg[STATUS#2 - 0x1F] = 00
Ready for capture (D0): No
Macrovision 7.01 (D1): No
MV Colorstripe burst (D2): No
MV Colorstripe burst type 3 (D3): No
Input signal timebase (D4): Non-stable (VCR)
Field frequency (D5): 50Hz
H & V loops (D6): Locked
Interlace (D7): Not detected
What else can I provide to help?
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
