Robert Kulagowski wrote:
I've posted about this before, but never got a response. I've googled
for the error message, but didn't find anything.
<snip>
vtv: version 0.3.5 (f) loading
ivtv: Linux version: 2.6.11-gentoo-r6 SMP 486 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected AVerMedia M179 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
tuner: Ignoring new-style parameters in presence of obsolete ones
saa7115: starting probe for adapter SMBus PIIX4 adapter at e800 (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc8
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring AVerMedia M179 card with 4 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Setting Tuner 2
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized AVerMedia M179, card #0
I've tracked this down to the tuner.ko that gets installed by ivtv. On
gentoo, when I rename /lib/modules/2.6.11-gentoo-r6/ivtv/tuner.ko to
.old, re-run depmod (to pickup the tuner.ko in kernel/drivers/media) and
reboot it apparently works:
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (r) loading
ivtv: Linux version: 2.6.11-gentoo-r6 SMP 486 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected AVerMedia M179 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter SMBus PIIX4 adapter at e800 (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc8
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring AVerMedia M179 card with 4 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 41 50540 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
ivtv i2c driver #0
ivtv: Could not detect tuner standard, defaulting to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized AVerMedia M179, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 9366, itv = 0xe8ad8fc0
ivtv: ivtv_enc_vbi_thread: pid = 9367, itv = 0xe8ad8fc0
Does this give anyone clues as to what's going wrong with the M179 and
the ivtv version of tuner.ko?
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
