Hello -
Yes, I'm one of those dreaded newbie's trying to learn FC3, MythTV,
ivtv and lots of other stuff that is relatively foreign to me. I
apologize in advance if I am making a stupid mistake, and I'd greatly
appreciate any help you might be able to provide.
Just to clarify, I had a single PVR-350 installed and working
without issue. As best I know, I simply made the changes for the
additional PVR-350 and now I only have a single /dev/fb0 (in addition
to the fb1 for the monitor) that seems to be a collision of both
TV-outs and therefore barely works at all.
My general question is: How do I configure ivtv-fb so that it will
recognize both of my PVR-350 cards installed in the computer and
create an individual framebuffer for each ('/dev/fb1' and '/dev/fb2').
I'm running ivtv version 0.2.0 (rc3j) using a pre-compiled
distribution of FC3 and Kernel version 2.6.11-1.14_FC3. I have
followed Jarod's website on building this system and have used
pre-compiled packages as he guide instructs.
I have the following in my modprobe.conf file:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias tveeprom tveeprom-ivtv
alias msp3400 msp3400-ivtv
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
When I run '/sbin/modprobe ivtv-fb' from the command line (after
rebooting without the line in modprobe.conf), I get this in the
/var/log/messages:
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: Framebuffer module loaded
(attached to ivtv card id 0)
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: Framebuffer is at
decoder-relative address 0x00510000 and has 1704960 bytes.
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: original global alpha = 208
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: current OSD state = 39
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: new global alpha = 208 (1 255 0)
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe
1090000, size 1350k
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: mode is 720x480x32, linelength=2880
Jun 1 18:42:57 Myth1 kernel: mtrr: no more MTRRs available
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: warning: mtrr_add() failed to add write
combining region 0xd9400000-0xd9600000
Jun 1 18:42:57 Myth1 kernel: Console: switching to colour frame buffer device 9
0x30
Jun 1 18:42:57 Myth1 kernel: ivtv-osd: fb0: iTVC15 TV out frame buffer device
With the exception of the MTRRs and warning lines, I got the exact
same lines with a single PVR-350, so I suspect those two lines are
clues into the issue. Is there some sort of option I need to set to
let ivtv-fb know that it needs to create multiple frame buffers?
Just to provide a bit of additional information, I'm able to
successfully capture video from both /video0 and /video1, which are
the tuners in each of the two hauppauge cards, so presumably I have
that configured correctly.
I think I've provided sufficient detail, but just to be thorough,
here's the [pertinent] output from 'lspci -v'
04:01.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
04:02.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 3
Memory at d4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Finally, when I'm trying to display information to the TV-OUTS (using
/dev/fb0), I get the following in the /var/log/messages:
Jun 1 18:55:33 Myth1 kernel: ivtv: ENC IRQ OVERFLOW: #687 Stealing a Buffer, 20
48 currently allocated
Finally, as Jarod recommends, here's the ivtv output from /var/log/message:
Jun 1 13:40:43 Myth1 kernel: ivtv: ==================== START INIT
IVTV ====================
Jun 1 13:40:43 Myth1 smartd[4088]: smartd version 5.33
[i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Jun 1 13:40:43 Myth1 kernel: ivtv: version 0.2.0 (rc3j) loading
Jun 1 13:40:43 Myth1 smartd[4088]: Home page is
http://smartmontools.sourceforge.net/
Jun 1 13:40:43 Myth1 kernel: ivtv: Linux version: 2.6.11-1.14_FC3 686
REGPARM 4KSTACKS gcc-3.4
Jun 1 13:40:43 Myth1 kernel: ivtv: In case of problems please include
the debug info
Jun 1 13:40:43 Myth1 kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
Jun 1 13:40:43 Myth1 kernel: ivtv: mailing the ivtv-devel mailinglist.
Jun 1 13:40:43 Myth1 smartd[4088]: Opened configuration file /etc/smartd.conf
Jun 1 13:40:43 Myth1 kernel: ivtv: Autodetected WinTV PVR 350 card
Jun 1 13:40:43 Myth1 smartd[4088]: Configuration file /etc/smartd.conf parsed.
Jun 1 13:40:43 Myth1 kernel: ivtv: Found an iTVC15 based chip
Jun 1 13:40:43 Myth1 smartd[4088]: Device: /dev/sda, opened
Jun 1 13:40:43 Myth1 kernel: ACPI: PCI interrupt 0000:04:01.0[A] ->
GSI 10 (level, low) -> IRQ 10
Jun 1 13:40:43 Myth1 smartd[4088]: Device /dev/sda, SATA disks
accessed via libata are not currently supported by smartmontools. When
libata is given an ATA
Jun 1 13:40:43 Myth1 kernel: ivtv: XXX PCI device: 0x2588 vendor: 0x8086
Jun 1 13:40:43 Myth1 smartd[4088]: Unable to register SCSI device
/dev/sda at line 1 of file /etc/smartd.conf
Jun 1 13:40:43 Myth1 kernel: tveeprom: Hauppauge: model = 48132, rev
= K268, serial# = 7775655
Jun 1 13:40:43 Myth1 smartd[4088]: Unable to register device /dev/sda
(no Directive -d removable). Exiting.
Jun 1 13:40:43 Myth1 kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx
= 68, type = 47)
Jun 1 13:40:43 Myth1 smartd: smartd startup failed
Jun 1 13:40:43 Myth1 kernel: tveeprom: tuner fmt = NTSC(M) (eeprom =
0x08, v4l2 = 0x00001000)
Jun 1 13:40:43 Myth1 kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Jun 1 13:40:43 Myth1 acpid: acpid startup succeeded
Jun 1 13:40:43 Myth1 kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Jun 1 13:40:43 Myth1 kernel: ivtv: Tuner Type 47, Tuner formats
0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001
Jun 1 13:40:43 Myth1 kernel: ivtv: NTSC tuner detected
Jun 1 13:40:43 Myth1 kernel: ivtv: Radio detected
Jun 1 13:40:43 Myth1 kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Jun 1 13:40:43 Myth1 kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun 1 13:40:43 Myth1 kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Jun 1 13:40:43 Myth1 kernel: saa7115: detecting saa7115 client on address 0x42
Jun 1 13:40:43 Myth1 kernel: saa7115: writing init values
Jun 1 13:40:43 Myth1 kernel: ivtv: i2c attach [client=saa7115[0],ok]
Jun 1 13:40:43 Myth1 kernel: saa7115: status: (1E) 0x01, (1F) 0xc0
Jun 1 13:40:43 Myth1 kernel: saa7127: Ignoring new-style parameters
in presence of obsolete ones
Jun 1 13:40:43 Myth1 kernel: saa7127: video encoder driver version V 0.3 loaded
Jun 1 13:40:43 Myth1 kernel: saa7127: detecting saa7127 client on address 0x88
Jun 1 13:40:43 Myth1 kernel: saa7127: Selecting NTSC video Standard
Jun 1 13:40:43 Myth1 kernel: saa7127: Selecting S-Video+Composite
Jun 1 13:40:43 Myth1 kernel: saa7127: Turn WSS off
Jun 1 13:40:43 Myth1 kernel: saa7127: Widescreen Mode 4:3 Full Format
Jun 1 13:40:43 Myth1 kernel: saa7127: Selecting Normal Encoder Input
Jun 1 13:40:43 Myth1 kernel: saa7127: Enable Video Output
Jun 1 13:40:43 Myth1 kernel: ivtv: i2c attach [client=saa7127[0],ok]
Jun 1 13:40:43 Myth1 kernel: msp34xx: ivtv version
Jun 1 13:40:43 Myth1 kernel: msp34xx: init: chip=MSP3448W-A2, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Jun 1 13:40:43 Myth1 kernel: msp34xx: $Id$ compiled on: May 12 2005 13:01:27
Jun 1 13:40:43 Myth1 kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jun 1 13:40:43 Myth1 kernel: ivtv: Encoder revision: 0x02040024
Jun 1 13:40:43 Myth kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
Jun 1 13:40:43 Myth1 kernel: ivtv: Decoder revision: 0x02020023
Jun 1 13:40:43 Myth1 kernel: ivtv: Configuring WinTV PVR 350 card
with 9 streams
Jun 1 13:40:43 Myth1 kernel: ivtv: Create DMA stream 0 using 256
16384 byte buffers 4194304 kbytes total
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0
Jun 1 13:40:43 Myth1 kernel: ivtv: Create DMA stream 1
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
1 minor 32
Jun 1 13:40:43 Myth1 kernel: ivtv: Create stream 2 using 40 52224
byte buffers 2097152 kbytes total
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
2 minor 224
Jun 1 13:40:43 Myth1 kernel: ivtv: Create DMA stream 3 using 455 4608
byte buffers 2097152 kbytes total
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
3 minor 24
Jun 1 13:40:43 Myth1 kernel: ivtv: Create stream 4
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
4 minor 64
Jun 1 13:40:43 Myth1 kernel: ivtv: Create DMA stream 5 using 16 65536
byte buffers 1048576 kbytes total
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
5 minor 16
Jun 1 13:40:43 Myth1 kernel: ivtv: Create stream 6 using 1024 2048
byte buffers 262144 kbytes total
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
6 minor 228
Jun 1 13:40:43 Myth1 kernel: ivtv: Create stream 7
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
7 minor 232
Jun 1 13:40:43 Myth1 kernel: ivtv: Create DMA stream 8
Jun 1 13:40:43 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
8 minor 48
Jun 1 13:40:43 Myth1 kernel: ivtv: Setting Tuner 47
Jun 1 13:40:43 Myth1 kernel: tuner: type set to 47 (LG NTSC (TAPE
series)) by ivtv i2c driver #0
Jun 1 13:40:43 Myth1 kernel: saa7115: decoder set input (4)
Jun 1 13:40:43 Myth1 kernel: saa7115: now setting Composite input
Jun 1 13:40:43 Myth1 kernel: ivtv: Setting audio matrix to input 3, output 1
Jun 1 13:40:00 Myth1 rc.sysinit: -e
Jun 1 13:40:43 Myth1 kernel: ivtv: Switching standard to NTSC.
Jun 1 13:40:01 Myth1 udevsend[1091]: starting udevd daemon
Jun 1 13:40:01 Myth1 scsi.agent[1103]: disk at
/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
Jun 1 13:40:44 Myth1 kernel: ivtv: ivtv_enc_thread: pid = 2120, itv =
0xe02120a0
Jun 1 13:40:01 Myth1 scsi.agent[1131]: disk at
/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
Jun 1 13:40:44 Myth1 kernel: ivtv: ivtv_dec_thread: pid = 2121, itv =
0xe02120a0
Jun 1 13:40:02 Myth1 start_udev: Starting udev: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7115: decoder set norm NTSC
Jun 1 13:40:03 Myth1 udevsend[1600]: starting udevd daemon
Jun 1 13:40:44 Myth1 kernel: saa7115: set audio: 0x01
Jun 1 13:40:17 Myth1 rc.sysinit: -e
Jun 1 13:40:44 Myth1 kernel: saa7127: Setting Encoder Video Standard
Jun 1 13:40:25 Myth1 sysctl: net.ipv4.ip_forward = 0
Jun 1 13:40:44 Myth1 kernel: saa7127: Set NTSC Video Mode
Jun 1 13:40:25 Myth1 sysctl: net.ipv4.conf.default.rp_filter = 1
Jun 1 13:40:44 Myth1 kernel: saa7127: Selecting NTSC video Standard
Jun 1 13:40:25 Myth1 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jun 1 13:40:44 Myth1 kernel: ivtv: Initialized WinTV PVR 350, card #0
Jun 1 13:40:25 Myth1 sysctl: kernel.sysrq = 0
Jun 1 13:40:44 Myth1 kernel: ivtv: Autodetected WinTV PVR 350 card
Jun 1 13:40:25 Myth1 sysctl: kernel.core_uses_pid = 1
Jun 1 13:40:44 Myth1 kernel: ivtv: Found an iTVC15 based chip
Jun 1 13:40:25 Myth1 rc.sysinit: Configuring kernel parameters: succeeded
Jun 1 13:40:44 Myth1 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
Jun 1 13:40:30 Myth1 date: Wed Jun 1 13:40:30 CDT 2005
Jun 1 13:40:44 Myth1 kernel: PCI: setting IRQ 3 as level-triggered
Jun 1 13:40:30 Myth1 rc.sysinit: Setting clock (localtime): Wed Jun
1 13:40:30 CDT 2005 succeeded
Jun 1 13:40:44 Myth1 kernel: ACPI: PCI interrupt 0000:04:02.0[A] ->
GSI 3 (level, low) -> IRQ 3
Jun 1 13:40:30 Myth1 rc.sysinit: Loading default keymap succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: XXX PCI device: 0x2588 vendor: 0x8086
Jun 1 13:40:30 Myth1 rc.sysinit: Setting hostname Myth1: succeeded
Jun 1 13:40:44 Myth1 kernel: tveeprom: Hauppauge: model = 48132, rev
= K168, serial# = 2947985
Jun 1 13:40:31 Myth1 rc.sysinit: Checking root filesystem succeeded
Jun 1 13:40:44 Myth1 kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx
= 68, type = 47)
Jun 1 13:40:31 Myth1 rc.sysinit: Remounting root filesystem in
read-write mode: succeeded
Jun 1 13:40:44 Myth1 kernel: tveeprom: tuner fmt = NTSC(M) (eeprom =
0x08, v4l2 = 0x00001000)
Jun 1 13:40:31 Myth1 lvm.static: 1 logical volume(s) in volume
group VideoVolumeGroup now active
Jun 1 13:40:44 Myth1 kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Jun 1 13:40:31 Myth1 rc.sysinit: Setting up Logical Volume
Management: succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: i2c attach [client=tveeprom[1],ok]
Jun 1 13:40:31 Myth1 rc.sysinit: Checking filesystems succeeded
Jun 1 13:40:44 Myth1 kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #1
Jun 1 13:40:31 Myth1 rc.sysinit: Mounting local filesystems: succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun 1 13:40:31 Myth1 rc.sysinit: Enabling local filesystem quotas: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7115: starting probe for adapter ivtv
i2c driver #1 (0x10005)
Jun 1 13:40:32 Myth1 rc.sysinit: Enabling swap space: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7115: detecting saa7115 client on address 0x42
Jun 1 13:40:32 Myth1 init: Entering runlevel: 5
Jun 1 13:40:44 Myth1 kernel: saa7115: writing init values
Jun 1 13:40:32 Myth1 readahead_early: Starting background readahead:
Jun 1 13:40:44 Myth1 kernel: ivtv: i2c attach [client=saa7115[1],ok]
Jun 1 13:40:33 Myth1 rc: Starting readahead_early: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7115: status: (1E) 0x01, (1F) 0xc0
Jun 1 13:40:38 Myth1 kudzu: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7127: detecting saa7127 client on address 0x88
Jun 1 13:40:38 Myth1 rc: Starting pcmcia: succeeded
Jun 1 13:40:44 Myth1 kernel: saa7127: Selecting NTSC video Standard
Jun 1 13:40:38 Myth1 sysctl: net.ipv4.ip_forward = 0
Jun 1 13:40:44 Myth1 kernel: saa7127: Selecting S-Video+Composite
Jun 1 13:40:38 Myth1 sysctl: net.ipv4.conf.default.rp_filter = 1
Jun 1 13:40:44 Myth1 kernel: saa7127: Turn WSS off
Jun 1 13:40:38 Myth1 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jun 1 13:40:44 Myth1 kernel: saa7127: Widescreen Mode 4:3 Full Format
Jun 1 13:40:38 Myth1 sysctl: kernel.sysrq = 0
Jun 1 13:40:44 Myth1 kernel: saa7127: Selecting Normal Encoder Input
Jun 1 13:40:38 Myth1 sysctl: kernel.core_uses_pid = 1
Jun 1 13:40:44 Myth1 kernel: saa7127: Enable Video Output
Jun 1 13:40:38 Myth1 network: Setting network parameters: succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: i2c attach [client=saa7127[1],ok]
Jun 1 13:40:39 Myth1 network: Bringing up loopback interface: succeeded
Jun 1 13:40:44 Myth1 kernel: msp34xx: ivtv version
Jun 1 13:40:41 Myth1 network: Bringing up interface eth0: succeeded
Jun 1 13:40:44 Myth1 kernel: msp34xx: init: chip=MSP3448W-A2, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Jun 1 13:40:44 Myth1 kernel: msp34xx: $Id$ compiled on: May 12 2005 13:01:27
Jun 1 13:40:44 Myth1 kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jun 1 13:40:44 Myth1 kernel: ivtv: Tuner Type 47, Tuner formats
0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001
Jun 1 13:40:44 Myth1 kernel: ivtv: NTSC tuner detected
Jun 1 13:40:44 Myth1 kernel: ivtv: Radio detected
Jun 1 13:40:44 Myth1 kernel: ivtv: Encoder revision: 0x02040024
Jun 1 13:40:44 Myth1 kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
Jun 1 13:40:44 Myth1 kernel: ivtv: Decoder revision: 0x02020023
Jun 1 13:40:44 Myth1 kernel: ivtv: Configuring WinTV PVR 350 card
with 9 streams
Jun 1 13:40:44 Myth1 kernel: ivtv: Create DMA stream 0 using 256
16384 byte buffers 4194304 kbytes total
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype 0 minor 1
Jun 1 13:40:44 Myth1 kernel: ivtv: Create DMA stream 1
Jun 1 13:40:44 Myth1 cups: cupsd startup succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
1 minor 33
Jun 1 13:40:44 Myth1 kernel: ivtv: Create stream 2 using 40 52224
byte buffers 2097152 kbytes total
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
2 minor 225
Jun 1 13:40:44 Myth1 kernel: ivtv: Create DMA stream 3 using 455 4608
byte buffers 2097152 kbytes total
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
3 minor 25
Jun 1 13:40:44 Myth1 sshd: succeeded
Jun 1 13:40:44 Myth1 kernel: ivtv: Create stream 4
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
4 minor 65
Jun 1 13:40:44 Myth1 kernel: ivtv: Create DMA stream 5 using 16 65536
byte buffers 1048576 kbytes total
Jun 1 13:40:44 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
5 minor 17
Jun 1 13:40:45 Myth1 kernel: ivtv: Create stream 6 using 1024 2048
byte buffers 262144 kbytes total
Jun 1 13:40:45 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
6 minor 229
Jun 1 13:40:45 Myth1 kernel: ivtv: Create stream 7
Jun 1 13:40:45 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
7 minor 233
Jun 1 13:40:45 Myth1 kernel: ivtv: Create DMA stream 8
Jun 1 13:40:45 Myth1 kernel: ivtv: Registered v4l2 device, streamtype
8 minor 49
Jun 1 13:40:45 Myth1 kernel: ivtv: Setting Tuner 47
Jun 1 13:40:45 Myth1 kernel: tuner: type set to 47 (LG NTSC (TAPE
series)) by ivtv i2c driver #1
Jun 1 13:40:45 Myth1 kernel: saa7115: decoder set input (4)
Jun 1 13:40:45 Myth1 kernel: saa7115: now setting Composite input
Jun 1 13:40:45 Myth1 kernel: ivtv: Setting audio matrix to input 3, output 1
Jun 1 13:40:45 Myth1 kernel: ivtv: Switching standard to NTSC.
Jun 1 13:40:45 Myth1 kernel: ivtv: ivtv_enc_thread: pid = 2252, itv =
0xe0226540
Jun 1 13:40:45 Myth1 kernel: ivtv: ivtv_dec_thread: pid = 2253, itv =
0xe0226540
Jun 1 13:40:45 Myth1 kernel: saa7115: decoder set norm NTSC
Jun 1 13:40:45 Myth1 kernel: saa7115: set audio: 0x01
Jun 1 13:40:45 Myth1 kernel: saa7127: Setting Encoder Video Standard
Jun 1 13:40:45 Myth1 kernel: saa7127: Set NTSC Video Mode
Jun 1 13:40:45 Myth1 kernel: saa7127: Selecting NTSC video Standard
Jun 1 13:40:45 Myth1 kernel: ivtv: Initialized WinTV PVR 350, card #1
Jun 1 13:40:45 Myth1 kernel: ivtv: ==================== END INIT
IVTV ====================
Sorry for the painfully long message, but I wanted to do my best to
post a complete question in hopes one of you experts will be able to
assist! Thanks in advance - doug.
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
