Just done a fresh install of FC3 and followed the instructions from Jarod 
Wilson's site.
Using ivtv 1:0.2.0-68_rc3j.rhfc3.at
The card is definitely a Hauppauge PVR 250
When I try a capture I get zero byte files.
What might be wrong.

Many many thanks
        Dave


Jun  6 20:04:32 mythtv kernel: ivtv: ==================== START INIT IVTV 
====================
Jun  6 20:04:32 mythtv kernel: ivtv: version 0.2.0 (rc3j) loading
Jun  6 20:04:32 mythtv kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686 
REGPARM 4KSTACKS gcc-3.4
Jun  6 20:04:32 mythtv kernel: ivtv: In case of problems please include the 
debug info
Jun  6 20:04:32 mythtv kernel: ivtv: between the START INIT IVTV and END INIT 
IVTV lines when
Jun  6 20:04:32 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
Jun  6 20:04:32 mythtv kernel: ivtv: Unknown card: vendor/device: 4444/0016, 
subsystem vendor/device: 0070/0009
Jun  6 20:04:32 mythtv kernel: ivtv: Defaulting to WinTV PVR 150 card
Jun  6 20:04:32 mythtv kernel: ivtv: Please mail the vendor/device and 
subsystem vendor/device IDs and what kind of
Jun  6 20:04:32 mythtv kernel: ivtv: card you have to the ivtv-devel 
mailinglist: http://sourceforge.net/projects/ivtv
Jun  6 20:04:32 mythtv kernel: ivtv: Prefix your subject line with [UNKNOWN 
CARD].
Jun  6 20:04:32 mythtv kernel: ivtv: Found an iTVC16 based chip
Jun  6 20:04:32 mythtv kernel: PCI: Found IRQ 10 for device 0000:01:0f.0
Jun  6 20:04:33 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:01.0
Jun  6 20:04:33 mythtv kernel: ivtv: XXX PCI device: 0x7124 vendor: 0x8086
Jun  6 20:04:33 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev = B111, 
serial# = 6695017
Jun  6 20:04:33 mythtv kernel: tveeprom: tuner = Philips FI1246 MK2 (idx = 11, 
type = 1)
Jun  6 20:04:33 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, 
v4l2 = 0x00000010)
Jun  6 20:04:33 mythtv kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Jun  6 20:04:33 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Jun  6 20:04:33 mythtv kernel: ivtv: Tuner Type 1, Tuner formats 0x00000010, 
Radio: yes, Model 0x00891451, Revision 0x00000000
Jun  6 20:04:33 mythtv kernel: ivtv: PAL tuner detected
Jun  6 20:04:33 mythtv kernel: ivtv: Radio detected
Jun  6 20:04:33 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c 
driver #0
Jun  6 20:04:33 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun  6 20:04:33 mythtv kernel: cx25840: Ignoring new-style parameters in 
presence of obsolete ones
Jun  6 20:04:33 mythtv kernel: wm8775: Ignoring new-style parameters in 
presence of obsolete ones
Jun  6 20:04:33 mythtv kernel: ivtv: Encoder revision: 0x02040024
Jun  6 20:04:33 mythtv kernel: ivtv: Encoder Firmware may be buggy, use 
version 0x02040011
Jun  6 20:04:33 mythtv kernel: ivtv: Configuring WinTV PVR 150 card with 5 
streams
Jun  6 20:04:33 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 byte 
buffers  4194304 kbytes total
Jun  6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 
minor 0
Jun  6 20:04:33 mythtv kernel: ivtv: Create DMA stream 1 
Jun  6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 
minor 32
Jun  6 20:04:33 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte 
buffers  2097152 kbytes total
Jun  6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 
minor 224
Jun  6 20:04:33 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 byte 
buffers  2097152 kbytes total
Jun  6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 
minor 24
Jun  6 20:04:33 mythtv kernel: ivtv: Create stream 4 
Jun  6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 
minor 64
Jun  6 20:04:33 mythtv kernel: ivtv: Setting Tuner 1
Jun  6 20:04:33 mythtv kernel: tuner: type set to 1 (Philips PAL_I (FI1246 and 
compatibles)) by ivtv i2c driver #0
Jun  6 20:04:33 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
Jun  6 20:04:33 mythtv kernel: ivtv: Switching standard to PAL.
Jun  6 20:04:33 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
Jun  6 20:04:33 mythtv kernel: ivtv: Initialized WinTV PVR 150, card #0
Jun  6 20:04:33 mythtv kernel: ivtv: ====================  END INIT IVTV  
====================


-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.  
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to