On Tuesday 07 June 2005 00:00, Bryan Mayland wrote:
> The driver doesn't know which type of card you have, as you have
> mentioned. You can either try the latest 0.3 development version, or I
> believe you can force the card type by adding:
> options ivtv cardtype=1
> to your modprobe.conf
options cardtype=2
Did the trick.
Thanks
Dave
>
> mythtv wrote:
> >Just done a fresh install of FC3 and followed the instructions from Jarod
> >Wilson's site.
> >Using ivtv 1:0.2.0-68_rc3j.rhfc3.at
> >The card is definitely a Hauppauge PVR 250
> >When I try a capture I get zero byte files.
> >What might be wrong.
> >
> >Many many thanks
> > Dave
> >
> >
> >Jun 6 20:04:32 mythtv kernel: ivtv: ==================== START INIT IVTV
> >====================
> >Jun 6 20:04:32 mythtv kernel: ivtv: version 0.2.0 (rc3j) loading
> >Jun 6 20:04:32 mythtv kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686
> >REGPARM 4KSTACKS gcc-3.4
> >Jun 6 20:04:32 mythtv kernel: ivtv: In case of problems please include
> > the debug info
> >Jun 6 20:04:32 mythtv kernel: ivtv: between the START INIT IVTV and END
> > INIT IVTV lines when
> >Jun 6 20:04:32 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
> >Jun 6 20:04:32 mythtv kernel: ivtv: Unknown card: vendor/device:
> > 4444/0016, subsystem vendor/device: 0070/0009
> >Jun 6 20:04:32 mythtv kernel: ivtv: Defaulting to WinTV PVR 150 card
> >Jun 6 20:04:32 mythtv kernel: ivtv: Please mail the vendor/device and
> >subsystem vendor/device IDs and what kind of
> >Jun 6 20:04:32 mythtv kernel: ivtv: card you have to the ivtv-devel
> >mailinglist: http://sourceforge.net/projects/ivtv
> >Jun 6 20:04:32 mythtv kernel: ivtv: Prefix your subject line with
> > [UNKNOWN CARD].
> >Jun 6 20:04:32 mythtv kernel: ivtv: Found an iTVC16 based chip
> >Jun 6 20:04:32 mythtv kernel: PCI: Found IRQ 10 for device 0000:01:0f.0
> >Jun 6 20:04:33 mythtv kernel: PCI: Sharing IRQ 10 with 0000:00:01.0
> >Jun 6 20:04:33 mythtv kernel: ivtv: XXX PCI device: 0x7124 vendor: 0x8086
> >Jun 6 20:04:33 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev =
> > B111, serial# = 6695017
> >Jun 6 20:04:33 mythtv kernel: tveeprom: tuner = Philips FI1246 MK2 (idx =
> > 11, type = 1)
> >Jun 6 20:04:33 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom =
> > 0x10, v4l2 = 0x00000010)
> >Jun 6 20:04:33 mythtv kernel: tveeprom: audio_processor = MSP3415 (type =
> > 6) Jun 6 20:04:33 mythtv kernel: ivtv: i2c attach
> > [client=tveeprom[0],ok] Jun 6 20:04:33 mythtv kernel: ivtv: Tuner Type
> > 1, Tuner formats 0x00000010, Radio: yes, Model 0x00891451, Revision
> > 0x00000000
> >Jun 6 20:04:33 mythtv kernel: ivtv: PAL tuner detected
> >Jun 6 20:04:33 mythtv kernel: ivtv: Radio detected
> >Jun 6 20:04:33 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv
> > i2c driver #0
> >Jun 6 20:04:33 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
> >Jun 6 20:04:33 mythtv kernel: cx25840: Ignoring new-style parameters in
> >presence of obsolete ones
> >Jun 6 20:04:33 mythtv kernel: wm8775: Ignoring new-style parameters in
> >presence of obsolete ones
> >Jun 6 20:04:33 mythtv kernel: ivtv: Encoder revision: 0x02040024
> >Jun 6 20:04:33 mythtv kernel: ivtv: Encoder Firmware may be buggy, use
> >version 0x02040011
> >Jun 6 20:04:33 mythtv kernel: ivtv: Configuring WinTV PVR 150 card with 5
> >streams
> >Jun 6 20:04:33 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384
> > byte buffers 4194304 kbytes total
> >Jun 6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0
> >minor 0
> >Jun 6 20:04:33 mythtv kernel: ivtv: Create DMA stream 1
> >Jun 6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1
> >minor 32
> >Jun 6 20:04:33 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte
> >buffers 2097152 kbytes total
> >Jun 6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2
> >minor 224
> >Jun 6 20:04:33 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608
> > byte buffers 2097152 kbytes total
> >Jun 6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3
> >minor 24
> >Jun 6 20:04:33 mythtv kernel: ivtv: Create stream 4
> >Jun 6 20:04:33 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4
> >minor 64
> >Jun 6 20:04:33 mythtv kernel: ivtv: Setting Tuner 1
> >Jun 6 20:04:33 mythtv kernel: tuner: type set to 1 (Philips PAL_I (FI1246
> > and compatibles)) by ivtv i2c driver #0
> >Jun 6 20:04:33 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
> >Jun 6 20:04:33 mythtv kernel: ivtv: Switching standard to PAL.
> >Jun 6 20:04:33 mythtv kernel: ivtv: i2c client addr: 0x44 not found!
> >Jun 6 20:04:33 mythtv kernel: ivtv: Initialized WinTV PVR 150, card #0
> >Jun 6 20:04:33 mythtv kernel: ivtv: ==================== END INIT IVTV
> >====================
> >
> >
> >-------------------------------------------------------
> >This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
> > shotput a projector? How fast can you ride your desk chair down the
> > office luge track? If you want to score the big prize, get to know the
> > little guy.
> >Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
> >_______________________________________________
> >ivtv-devel mailing list
> >[email protected]
> >https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
> shotput a projector? How fast can you ride your desk chair down the office
> luge track? If you want to score the big prize, get to know the little guy.
> Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
