Bryan,
Thanks for the help. Yes, I have a 350 and a 150 in the system. It does
appear the cx25840 does load even with the bogus option. However, lsmod
shows it as not being used. I put the following in the modprobe.conf per
your directions:
options cx25840 i2c_enable=-1,1
options saa7127 i2c_enable=1,-1
I still see the IVTV_IRQ_DEC_DMA_ERRs like before Any other ideas? I have
included a new clip from my messages file below:
Jun 15 10:50:31 PVR kernel: ivtv: ==================== START INIT IVTV
=========
===========
Jun 15 10:50:31 PVR kernel: ivtv: version 0.3.5 (l) loading
Jun 15 10:50:31 PVR kernel: ivtv: Linux version: 2.6.11-1.27_FC3 gcc-3.4
Jun 15 10:50:31 PVR kernel: ivtv: In case of problems please include the
debug i
nfo
Jun 15 10:50:31 PVR kernel: ivtv: between the START INIT IVTV and END INIT
IVTV
lines when
Jun 15 10:50:31 PVR kernel: ivtv: mailing the ivtv-devel mailinglist.
Jun 15 10:50:31 PVR kernel: ivtv: Autodetected WinTV PVR 350 card
Jun 15 10:50:31 PVR kernel: ivtv: Found an iTVC15 based chip
Jun 15 10:50:31 PVR kernel: ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5
(level,
low) -> IRQ 5
Jun 15 10:50:31 PVR kernel: ivtv: Unreasonably low latency timer, setting to
64
(was 32)
Jun 15 10:50:31 PVR kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
Jun 15 10:50:31 PVR kernel: tveeprom: Hauppauge: model = 48132, rev = K168,
seri
al# = 2947375
Jun 15 10:50:31 PVR kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68,
type
= 47)
Jun 15 10:50:31 PVR kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,
v4l2 =
0x00001000)
Jun 15 10:50:31 PVR kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Jun 15 10:50:31 PVR kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jun 15 10:50:31 PVR kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000,
Radio
: yes, Model 0x00ad1598, Revision 0x00000001
Jun 15 10:50:31 PVR kernel: ivtv: Radio detected
Jun 15 10:50:31 PVR kernel: tuner: Ignoring new-style parameters in presence
of
obsolete ones
Jun 15 10:50:31 PVR kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driv
er #0
Jun 15 10:50:31 PVR kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun 15 10:50:31 PVR kernel: saa7115: starting probe for adapter SMBus
nForce2 ad
apter at 4c00 (0x0)
Jun 15 10:50:31 PVR kernel: saa7115: starting probe for adapter SMBus
nForce2 ad
apter at 4c40 (0x0)
Jun 15 10:50:32 PVR kernel: saa7115: starting probe for adapter ivtv i2c
driver
#0 (0x10005)
Jun 15 10:50:32 PVR kernel: saa7115: detecting saa7115 client on address
0x42
Jun 15 10:50:32 PVR kernel: saa7115: writing init values
Jun 15 10:50:32 PVR kernel: ivtv: i2c attach [client=saa7115[50],ok]
Jun 15 10:50:32 PVR kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Jun 15 10:50:32 PVR kernel: saa7127: Ignoring new-style parameters in
presence o
f obsolete ones
Jun 15 10:50:32 PVR kernel: saa7127: video encoder driver version V 0.3
loaded
Jun 15 10:50:32 PVR kernel: saa7127: detecting saa7127 client on address
0x88
Jun 15 10:50:32 PVR kernel: saa7127: Selecting NTSC video Standard
Jun 15 10:50:32 PVR kernel: saa7127: Selecting S-Video+Composite
Jun 15 10:50:32 PVR kernel: saa7127: Turn WSS off
Jun 15 10:50:32 PVR kernel: saa7127: Widescreen Mode 4:3 Full Format
Jun 15 10:50:32 PVR kernel: saa7127: Selecting Normal Encoder Input
Jun 15 10:50:32 PVR kernel: saa7127: Enable Video Output
Jun 15 10:50:32 PVR kernel: ivtv: i2c attach [client=saa7127[50],ok]
Jun 15 10:50:32 PVR kernel: msp34xx: ivtv version
Jun 15 10:50:32 PVR kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM
support,
simple (D) mode, simpler (G) no-thread mode
Jun 15 10:50:32 PVR kernel: msp34xx: $Id$ compiled on: May 28 2005 04:34:02
Jun 15 10:50:32 PVR kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jun 15 10:50:33 PVR kernel: ivtv: Encoder revision: 0x02040024
Jun 15 10:50:33 PVR kernel: ivtv: Encoder Firmware may be buggy, use version
0x0
2040011
Jun 15 10:50:33 PVR kernel: ivtv: Decoder revision: 0x02020023
Jun 15 10:50:33 PVR kernel: ivtv: Configuring WinTV PVR 350 card with 10
streams
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 0 minor
0
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 0 using 128 16384 byte
buffe
rs 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 1 minor
32
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 1 using 97 21600 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 2 minor
224
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 2 using 60 34656 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 3 minor
24
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 3 using 455 4608 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 4 minor
64
Jun 15 10:50:33 PVR kernel: ivtv: Create stream 4
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 5 minor
16
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 5 using 16 65536 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 6 minor
228
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 6 using 1024 2048 byte
buffe
rs 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 7 minor
232
Jun 15 10:50:33 PVR kernel: ivtv: Create stream 7
Jun 15 10:50:33 PVR kernel: ivtv: Registered v4l2 device, streamtype 8 minor
48
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 8 using 97 21600 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Create DMA stream 9 using 32 65536 byte
buffer
s 0 kbytes total
Jun 15 10:50:33 PVR kernel: ivtv: Setting Tuner 47
Jun 15 10:50:33 PVR kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by
ivt
v i2c driver #0
Jun 15 10:50:33 PVR kernel: saa7115: decoder set norm NTSC
Jun 15 10:50:33 PVR kernel: ivtv: ivtv_enc_thread: pid = 5207, itv =
0xffffffff8
84086a0
Jun 15 10:50:33 PVR kernel: ivtv: ivtv_enc_vbi_thread: pid = 5208, itv =
0xfffff
fff884086a0
Jun 15 10:50:33 PVR kernel: ivtv: ivtv_dec_thread: pid = 5209, itv =
0xffffffff8
84086a0
Jun 15 10:50:33 PVR kernel: ivtv: ivtv_dec_vbi_thread: pid = 5210, itv =
0xfffff
fff884086a0
Jun 15 10:50:33 PVR kernel: saa7115: set audio: 0x01
Jun 15 10:50:33 PVR kernel: saa7115: decoder set input (4)
Jun 15 10:50:33 PVR kernel: saa7115: now setting Composite input
Jun 15 10:50:33 PVR kernel: ivtv: Setting audio matrix to input 3, output 1
Jun 15 10:50:33 PVR kernel: ivtv: Switching standard to NTSC.
Jun 15 10:50:34 PVR kernel: saa7115: decoder set norm NTSC
Jun 15 10:50:34 PVR kernel: saa7115: set audio: 0x01
Jun 15 10:50:34 PVR kernel: saa7127: Setting Encoder Video Standard
Jun 15 10:50:34 PVR kernel: saa7127: Set NTSC Video Mode
Jun 15 10:50:34 PVR kernel: saa7127: Selecting NTSC video Standard
Jun 15 10:50:34 PVR kernel: ivtv: Initialized WinTV PVR 350, card #0
Jun 15 10:50:34 PVR kernel: ivtv: Autodetected WinTV PVR 150 card
Jun 15 10:50:34 PVR kernel: ivtv: Found an iTVC16 based chip
Jun 15 10:50:34 PVR kernel: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 5
(level,
low) -> IRQ 5
Jun 15 10:50:34 PVR kernel: ivtv: Unreasonably low latency timer, setting to
64
(was 32)
Jun 15 10:50:34 PVR kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
Jun 15 10:50:34 PVR kernel: tveeprom: Hauppauge: model = 26552, rev = B268,
seri
al# = 7865224
Jun 15 10:50:34 PVR kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68,
type
= 47)
Jun 15 10:50:34 PVR kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,
v4l2 =
0x00001000)
Jun 15 10:50:34 PVR kernel: tveeprom: audio_processor = MSP3410D (type = 5)
Jun 15 10:50:34 PVR kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jun 15 10:50:34 PVR kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driv
er #1
Jun 15 10:50:34 PVR kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun 15 10:50:34 PVR kernel: saa7115: starting probe for adapter ivtv i2c
driver
#1 (0x10005)
Jun 15 10:50:34 PVR kernel: saa7127: detecting saa7127 client on address
0x88
Jun 15 10:50:34 PVR kernel: saa7127: saa7127 client id: saa7127_i2c_id 1,
skippe
d
Jun 15 10:50:34 PVR kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000,
Radio
: yes, Model 0x00892598, Revision 0x00000001
Jun 15 10:50:34 PVR kernel: ivtv: Radio detected
Jun 15 10:50:34 PVR kernel: ivtv: i2c attach [client=wm8775[50],ok]
Jun 15 10:50:35 PVR kernel: ivtv: Encoder revision: 0x02040024
Jun 15 10:50:35 PVR kernel: ivtv: Encoder Firmware may be buggy, use version
0x0
2040011
Jun 15 10:50:35 PVR kernel: ivtv: Configuring WinTV PVR 150 card with 5
streams
Jun 15 10:50:35 PVR kernel: ivtv: Registered v4l2 device, streamtype 0 minor
1
Jun 15 10:50:35 PVR kernel: ivtv: Create DMA stream 0 using 128 16384 byte
buffe
rs 0 kbytes total
Jun 15 10:50:35 PVR kernel: ivtv: Registered v4l2 device, streamtype 1 minor
33
Jun 15 10:50:35 PVR kernel: ivtv: Create DMA stream 1 using 97 21600 byte
buffer
s 0 kbytes total
Jun 15 10:50:35 PVR kernel: ivtv: Registered v4l2 device, streamtype 2 minor
225
Jun 15 10:50:35 PVR kernel: ivtv: Create DMA stream 2 using 60 34656 byte
buffer
s 0 kbytes total
Jun 15 10:50:35 PVR kernel: ivtv: Registered v4l2 device, streamtype 3 minor
25
Jun 15 10:50:35 PVR kernel: ivtv: Create DMA stream 3 using 455 4608 byte
buffer
s 0 kbytes total
Jun 15 10:50:35 PVR kernel: ivtv: Registered v4l2 device, streamtype 4 minor
65
Jun 15 10:50:35 PVR kernel: ivtv: Create stream 4
Jun 15 10:50:35 PVR kernel: ivtv: Setting Tuner 47
Jun 15 10:50:35 PVR kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by
ivt
v i2c driver #1
Jun 15 10:50:35 PVR kernel: ivtv: i2c client addr: 0x44 not found for
command 10
74029571!
Jun 15 10:50:35 PVR kernel: ivtv: i2c client addr: 0x44 not found for
command 10
74029572!
Jun 15 10:50:35 PVR kernel: ivtv: i2c client addr: 0x44 not found for
command 10
74291822!
Jun 15 10:50:35 PVR kernel: ivtv: Switching standard to NTSC.
Jun 15 10:50:35 PVR kernel: ivtv: i2c client addr: 0x44 not found for
command 10
74029571!
Jun 15 10:50:35 PVR kernel: ivtv: Initialized WinTV PVR 150, card #1
Jun 15 10:50:35 PVR kernel: ivtv: ==================== END INIT IVTV
=========
===========
From: Bryan Mayland <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: [email protected]
Subject: Re: [ivtv-devel] Problems with IVTV_IRQ_DEC_DMA_ERR
Date: Wed, 15 Jun 2005 12:29:02 -0400
Bryan Mayland wrote:
options saa7127 i2c_enable=1,-1
EDIT: also forgot you'll need
options cx25840 i2c_enable=-1,1
(note that they are opposites)
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
