Hi, I'm also experiencing this problem - started with 0.3.6m and persists with 0.3.6p. I'm in New Zealand (PAL B) and I'm using the composite input to the card from a cable STB. My card is a PVR-150MCE. Excerpt from /var/log/messages below:
Jun 21 22:45:31 rimmer kernel: ivtv: version 0.3.6 (p) loading Jun 21 22:45:31 rimmer kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4 Jun 21 22:45:31 rimmer kernel: ivtv: In case of problems please include the debu g info Jun 21 22:45:31 rimmer kernel: ivtv: between the START INIT IVTV and END INIT IV TV lines when Jun 21 22:45:31 rimmer kernel: ivtv: mailing the ivtv-devel mailinglist. Jun 21 22:45:31 rimmer kernel: ivtv: Autodetected WinTV PVR 150 card Jun 21 22:45:31 rimmer kernel: ivtv: Found an iTVC16 based chip Jun 21 22:45:31 rimmer kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 Jun 21 22:45:31 rimmer kernel: PCI: setting IRQ 5 as level-triggered Jun 21 22:45:31 rimmer kernel: ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (lev el, low) -> IRQ 5 Jun 21 22:45:31 rimmer kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Jun 21 22:45:31 rimmer kernel: ivtv: XXX PCI device: 0x2570 vendor: 0x8086 Jun 21 22:45:31 rimmer kernel: tveeprom: Hauppauge: model = 26559, rev = C260, s erial# = 7618654 Jun 21 22:45:31 rimmer kernel: tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) Jun 21 22:45:31 rimmer kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jun 21 22:45:31 rimmer kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jun 21 22:45:31 rimmer kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jun 21 22:45:31 rimmer kernel: ivtv: Tuner Type 58, Tuner formats 0x00400e17, Ra dio: yes, Model 0x008d2590, Revision 0x00000001 Jun 21 22:45:31 rimmer kernel: ivtv: PAL tuner detected > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Bryan Mayland > Sent: Friday, 17 June 2005 8:57 a.m. > To: ivtv-devel@lists.sourceforge.net > Subject: Re: [ivtv-devel] ivtv-0.3.6m: PAL doublevision problems > > Hey, that's my code! Can you provide a `utils/cx25840-ctl -l` dump? > Apparently the card is overriding the values we're setting in > vbi_reg_setup because it is detecting a different video standard. > > Ulrich Mayer wrote: > > > Chris, > > > > both 0.3.6m and 0.3.6n suffer from displaying doublevision video. > > After undoing the following snipplet of ivtv-0.3.6l_m.diff > everything > > works fine again for me (well, all but the fact that I always get > > tuner audio, also for composite and line-in/s-video). > > > > diff -BurN ivtv-0.3.6l/driver/cx25840-driver.c > > ivtv-0.3.6m/driver/cx25840-driver.c > > --- ivtv-0.3.6l/driver/cx25840-driver.c 2005-06-14 > > 15:38:51.000000000 -0500 > > +++ ivtv-0.3.6m/driver/cx25840-driver.c 2005-06-15 > > 14:05:28.000000000 -0500 > > @@ -211,6 +211,10 @@ > > break; > > } > > > > + // We set 0x470-0x47f manually, prevent > > + // ACFG from trying to autodetect > > + CX25840_SET_ACFG_DIS(0x01); > > + > > if (is_pal) { > > // 8d. > > CX25840_SET_COMB_PHASE_LIMIT(0x11); > > > > > > > > tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7702916 > > tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) > > tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = > > 0x00000e07) > > tveeprom: audio_processor = MSP3400C (type = 4) > > > > pal=G > > > > Uli > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration > Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > > _______________________________________________ > > ivtv-devel mailing list > > ivtv-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration > Strategies from IBM. Find simple to follow Roadmaps, > straightforward articles, informative Webcasts and more! Get > everything you need to get up to speed, fast. > http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
